Skip to the content
2 layers366.7 × 106 mmAEPOQ, the printed circuit board in 3D

A keyboard made entirely from scrach

Size
366.7 × 106 mm
Copper layers
2
Thickness
1.5 mm
Parts
151
Nets
109
Pads
593
Tracks, vias
775, 43
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
29 Aug 2026
Updated
30 Aug 2026

Overview

AEPOQ is an open-source printed circuit board by phantom-ascii, from the phantom-ascii/AEPOQ repository on GitHub. It is a 2-layer board of 366.7 × 106 mm with 151 parts on 109 nets, routed with 775 tracks and 43 vias.

Its parts include 69 switches, 68 diodes and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.

README

README.md
image

AEPOQ

born to be different

AEPOQ was created by a 14 year old kid. I created AEPOQ to study on keyboard layouts and matricies. "Why" you may ask... Well i want to creat a laptop in the next 2 years and what better way to learn about hardware and laptops than making a keyboard (there are proably alot of better ways.) Unfortunately i could not add my full master step die to githubs large file limit and i didnt have time to set up lfs or smth like that cause im leaving for school in 2 hours. Anyways the keyboard is a 68 key 65% keyboard designed for productivity. It has a rotaty switch and an oled to make it special. AND A CANDY HOLDER ON THE RIGHT.Heres some eye candy:

Screenshot From 2026-08-30 17-38-26 Screenshot From 2026-08-30 16-52-24 image Screenshot From 2026-08-30 16-23-58 Screenshot From 2026-08-30 16-23-42 Screenshot From 2026-08-30 16-22-54 Screenshot From 2026-08-29 22-46-02 Screenshot From 2026-08-29 22-43-03 Screenshot From 2026-08-29 22-37-18

I used a normal mattix for yhe key switches and a raspberry pi pico for the mcu. the firmware is a test and im not expecting it to work. i will fix it once i actually build the keyboard as that is what i usually do. The keyboard case is at a 6.3~ slant for imprived erganomics. Everything was designed me using models as a guide from open source repositorys. This project is also published on the hackclub programn, forge. I will be using cherry mx keyswitches and generic key caps. The rotary endoer is a ec11 from alps. the oled is a generic 0.91 oled 4 pin header and the mcu is a raspberry pi pico. The keyswitch layout is a generic 65% stagered QWERTY for productivity and general erganomics. If you want to rip any models from this repo go ahead. Its open source anyways.

Here is the BOM:

65% Custom Keyboard - Master Bill of Materials

1. Electronics & Hardware (AliExpress)

ComponentStoreSpec / DescriptionPrice (USD)Order Link
MicrocontrollerWeAct Studio Official StoreRP2040 (8MB Black Edition)$5.16RP2040 Pico Board
DiodesChinese Super Electronic market1N4148 SOD-123 SMD Diodes (1000-pack)$4.541N4148 SOD-123 Diodes
Rotary EncoderDQLZV Official StoreEC11 Encoder 20mm Half-Handle (5-pack)$2.85EC11 Rotary Encoder
OLED Displaydiymore Alice1101983 Store0.91" 128x32 I2C Display Module$3.090.91" I2C OLED Module
SwitchesThe Powerpuff Girls Switch StoreCherry Switches (70-pack)$26.58Cherry MX Switches
StabilizersYMDK StoreScrew-In PCB Mount Stabilizer Set$18.62YMDK PCB Stabilizers
KeycapsMelokey StoreLine Gradient Side-Shine Cherry PBT$18.32Side-Shine PBT Keycaps
Heat-Set InsertsZenhosit StoreBrass Threaded Inserts M2/M2.5/M3 (220-pack)$4.91M2 Brass Inserts
Choice DiscountChoice DiscountsApplied Checkout Savings-$7.07—
AliExpress ShippingChoice / StandardExpedited Combined Delivery$0.00Free
AliExpress Subtotal$84.06

2. PCB Fabrication & 3D Printing (JLCPCB / JLC3DP)

ItemServiceDescriptionPrice (USD)
PCB Prototypes (Aepoq_Y7)JLCPCBWhite Solder Mask, 1.6 mm, HASL (5-pack)$22.60
Keyboard Case (Case.step)JLC3DP9600 Resin, White SLA 3D Print (1 pc)$88.74
Keyboard Lid (Lid.step)JLC3DP9600 Resin, White SLA 3D Print (1 pc)$13.04
JLCPCB ShippingStandard / ExpressPackage Weight: 3.01 kg$90.06
JLCPCB CouponsCheckout CouponApplied Savings-$25.00
JLCPCB Subtotal$189.44

3. Total Project Cost

CategoryAmount (USD)
AliExpress Subtotal$84.06
JLCPCB Subtotal$189.44
Grand Total$273.50

the whole build comes out to around $273, with jlcpcb taking up $189 of that. the shipping and case prices ended up pretty high because i intentionally went with a filled interior instead of hollowing it out. i've always hated light, cheap-feeling keyboards, so i wanted this build to have some serious weight to it and feel super solid on the desk even if it meant paying extra for the resin.

image image

Parts

151
QtyValueFootprintReferences
681N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +52
68MX_SW_solderPCM_marbastlib-mx:SW_MX_1uSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +52
4LOGOLOGOG***, G***, G***, G***
1ER_OLEDM0.91_1x-I2CDisplay:ER_OLEDM0.91_1x-I2CU1
1RaspberryPi_PicoScottoKeebs_MCU:Raspberry_Pi_PicoA1
1RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW43

The 143 most common of 151 parts.

Similar boards

  • 2 layers60 × 126.6 mmV3 Connector + IRLED, the printed circuit board in 3D

    V3 Connector + IRLED

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    151 parts439GPL-2.0
  • 2 layers285 × 94.2 mmKeyboard wabble-60, the printed circuit board in 3D

    Keyboard wabble-60

    rgoulter/keyboard-labs

    Repo with my PCB designs and keyboard firmware

    151 parts236
  • 2 layers250 × 10 mmRgbwstrip120 250, the printed circuit board in 3D

    Rgbwstrip120 250

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    151 parts114
  • 2 layers96.3 × 95.9 mmLergo, the printed circuit board in 3D

    Lergo

    AxelVoitier/keebs

    Axel's keebs

    151 parts71
  • 2 layers101.6 × 147.3 mmKarabas pro revC1, the printed circuit board in 3D

    Karabas pro revC1

    andykarpov/karabas-pro

    FPGA based retrocomputer with FDD and HDD controllers

    151 parts37MIT
  • 2 layers242.3 × 75.4 mmM3n3van, the printed circuit board in 3D

    M3n3van

    matthewdias/m3n3van

    A minivan case compatible PCB with 2x3u split space

    151 parts20MIT

Questions

How big is the AEPOQ PCB?

It measures 366.7 × 106 mm and has 2 copper layers, 1.5 mm thick.

What parts does the AEPOQ use?

151 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AEPOQ KiCad files?

From the phantom-ascii/AEPOQ repository on GitHub, at the commit this page was made from: the board is PCB/Aepoq.kicad_pcb and its schematic PCB/Aepoq.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AEPOQ design in my own project?

Its repository states no licence, so its author keeps all rights: ask phantom-ascii before reusing the design.