
SJ-201-R6
MycroftAI/hardware-mycroft-mark-II
Mycroft's Mark II Rpi mechanical, electrical and industrial designs

My personal webpage
Adrianino PC is an open-source printed circuit board by paulcair, from the paulcair/paulcairns repository on GitHub. It is a 2-layer board of 55.9 × 45.7 mm with 15 parts on 18 nets, routed with 185 tracks and 0 vias.
It is built around the ATTINY1614-SSN. Its parts include 6 connectors, 4 resistors, 2 ICs, 1 capacitor and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This is the repository that contains all of the information about Paul Cairns. It is a portfolio of his work.
Clone the repository to get access to my project files and edit it according to your needs.
You can navigate through to see his projects and porfolio,as well as an overview of his career and blog posts following URL: www.paul-cairns.com Enjoy the page! Should you have any questions. Leave a comment, or email me at paulcair@gmail.com
Enjoy!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4.99k | fab:R_1206 | R1, R2 |
| 1 | 1k | fab:R_1206 | R4 |
| 1 | 1uF | fab:C_1206 | C1 |
| 1 | 499 | fab:R_1206 | R3 |
| 1 | ANALOG | fab:fab-1X08SMD | J2 |
| 1 | ATtiny1614-SS | fab:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | BUTTON | fab:Button_Omron_B3SN_6x6mm | SW1 |
| 1 | DIGITAL | fab:fab-2X03SMD | J6 |
| 1 | FTDI | fab:Header_SMD_FTDI_01x06_P2.54mm_Horizontal_Male | J3 |
| 1 | I2C | fab:fab-1X05SMD | J5 |
| 1 | LED | fab:LED_1206 | D1 |
| 1 | POWER 9V | fab:fab-1X02SMD | J1 |
| 1 | UPDI | fab:Header_SMD_01x03_P2.54mm_Horizontal_Male | J4 |
| 1 | VREG | fab:SOT-223-3_TabPin2 | U2 |

MycroftAI/hardware-mycroft-mark-II
Mycroft's Mark II Rpi mechanical, electrical and industrial designs

MarkR42/malenki-esc
A small electronic speed controller for e.g. tiny fighting robots or other rc models




tomtor/ESPTiny
KiCad ATtiny84/x14/x02 (SMD) and ESP-01 (ESP 8266) PCB boards

vladbelous/avr-attiny1614-mini
AVR attiny1614 (tinyAVR 1-series) mini board
It measures 55.9 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the ATTINY1614-SSN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the paulcair/paulcairns repository on GitHub, at the commit this page was made from: the board is public/skillsportfolio/electronics/electronics-design/Adrianino_PC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask paulcair before reusing the design.