Skip to the content
2 layers86 × 83 mmRobotLaberinto, the printed circuit board in 3D
Size
86 × 83 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
48
Pads
121
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 10.0 (file 20260206)
Created
8 Sep 2026
Updated
8 Sep 2026

Overview

RobotLaberinto is an open-source printed circuit board by patriciowelch, from the patriciowelch/PCB-Laberinto-AR repository on GitHub. It is a 2-layer board of 86 × 83 mm with 30 parts on 48 nets.

It is built around the DRV8833PWP, MP2307DN-Z and CNY70. Its parts include 7 capacitors, 7 resistors, 6 connectors and 4 ICs. It belongs with the ESP32 and RISC-V boards of this library.

Main components

3

Parts

30
QtyValueFootprintReferences
5VL53LDKConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJX1, JX2, JX3, JX4, JX5
5VL53LDKConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1, J2, J3, J4, J5
310kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R5
2100Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6, R7
210nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC8, C10
210uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
1100kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
1100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4
12.2uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC7
13.9nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5
16k8Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4
1BNO08Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ6
1CNY70OptoDevice:Vishay_CNY70U4
1DRV8833PWPPackage_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.78x3.37mmU1
1ESP32-C3_SUPERMINI_THUSER:MODULE_ESP32-C3_SUPERMINIU2
1MP2307Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.62x3.51mmU3
1R_Potentiometer_TrimPotentiometer_SMD:Potentiometer_Bourns_TC33X_VerticalRV1

Similar boards

  • 4 layers173.9 × 93.4 mmZ3660 v022, the printed circuit board in 3D

    Z3660 v022

    shanshe/Z3660

    Amiga 4000 CPU accelerator board based on A3660 and Z-turn FPGA board

    198 parts78GPL-3.0
  • 2 layers99.6 × 100 mmPCB Fujitora, the printed circuit board in 3D

    PCB Fujitora

    OPRobots/FujitoraBot

    Robotracer - siguelíneas de alto rendimiento; con succión, tracción brushless en sistema tetra y procesador STM32F4

    118 parts68GPL-3.0
  • 2 layers39.9 × 45 mmCanBus Radio VAG, the printed circuit board in 3D

    CanBus Radio VAG

    AugustoS97/CanBus-Radio-VAG

    CANBUS PCB to control original functions of VAG (VW, SKODA, SEAT, AUDI) cars (such us original DSP and other functions).

    35 parts16
  • 2 layers149.2 × 83.7 mmNodo BMS 1 1, the printed circuit board in 3D

    Nodo BMS 1 1

    AugustoS97/BMS-BatterySystem

    Repositorio con el diseño de un BMS y una batería como TFM

    117 parts7GPL-3.0
  • 2 layers52.3 × 50.3 mmSdisfp, the printed circuit board in 3D

    Sdisfp

    cleverfox/sdi_fiber_converter

    62 parts2
  • 2 layers94.9 × 40.6 mmEsp32-c3-board bms, the printed circuit board in 3D

    Esp32-c3-board bms

    ieb/N2KNMEA0183Wifi

    Exposes NMEA2000 and BMS data over BLE for Apps to use. Also supports Wifi/http/tcp/udp services.

    43 parts2
  • 4 layers88.3 × 112.3 mmSoil metrics, the printed circuit board in 3D

    Soil metrics

    Aryan-git-byte/Soil-metrics

    Portable AI-powered soil monitoring device with LTE connectivity, GPS, touchscreen interface, and real-time soil health analytics.

    74 parts1MIT
  • 2 layers169.7 × 75.2 mmSdisfp, the printed circuit board in 3D

    Sdisfp

    cleverfox/sdi_matrix

    matrix switch for copper and fiber ports

    151 parts1

Questions

How big is the RobotLaberinto PCB?

It measures 86 × 83 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RobotLaberinto use?

30 parts, built around the DRV8833PWP, MP2307DN-Z and CNY70. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RobotLaberinto KiCad files?

From the patriciowelch/PCB-Laberinto-AR repository on GitHub, at the commit this page was made from: the board is RobotLaberinto.kicad_pcb and its schematic RobotLaberinto.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RobotLaberinto design in my own project?

Its repository states no licence, so its author keeps all rights: ask patriciowelch before reusing the design.