
Openchess board
PaoloJN/openchess
A chessboard that knows where the pieces are: 64 Hall sensors, 81 RGB LEDs, one ESP32, a printed case, and a BLE phone app. KiCad hardware, PlatformIO firmware, Expo app.

A chessboard that knows where the pieces are: 64 Hall sensors, 81 RGB LEDs, one ESP32, a printed case, and a BLE phone app. KiCad hardware, PlatformIO firmware, Expo app.
Openchess controller is an open-source printed circuit board by PaoloJN, from the PaoloJN/openchess repository on GitHub. It is a 2-layer board of 58 × 71 mm with 28 parts on 55 nets, routed with 334 tracks and 9 vias.
It is built around the 74AHCT125D, ESP32-DEVKITC-VE and TBD62783APG. Its parts include 13 resistors, 5 capacitors, 3 ICs, 2 connectors and 1 diode. It belongs with the ESP32 boards of this library.
Status: shelved 2026-10-24, never fabricated. The schematic reached ERC-clean and layout was started. Dropped because the v0.1 controller with a battery-module swap does the job for a one-off board. Kept for reference.
Integrated controller: soldered ESP32-WROOM-32E + USB-C (CH340C) + BQ24074 power-path charger + TPS61022 5V boost + AMS1117-3.3. Replaces the v1 DevKitC + Lipo Rider Plus daughterboards.
docs/superpowers/specs/2026-07-27-controller-v2-integrated-design.mddocs/superpowers/plans/2026-07-27-controller-v2-integrated.mddocs/gpio-map.md (v2 table)SOURCING.mdThe KiCad files keep their original names (openchess-controller.*) within this
directory; the directory name itself (hardware-controller-v2/) distinguishes v2
from frozen v1.
v1 (../hardware-controller/) is frozen — boards exist physically.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R36, R37 |
| 2 | 10µF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 33Ω | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 74AHCT125 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | Conn_02x13 | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | J1 |
| 1 | ESP32-DevKitC | Espressif:ESP32-DevKitC | U2 |
| 1 | J_PANEL XH-10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | Lipo Rider Plus | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | M1 |
| 1 | SS14 (or BAT60A) | Diode_SMD:D_SMA | D2 |
| 1 | TBD62783A | Package_DIP:DIP-18_W7.62mm | U6 |

PaoloJN/openchess
A chessboard that knows where the pieces are: 64 Hall sensors, 81 RGB LEDs, one ESP32, a printed case, and a BLE phone app. KiCad hardware, PlatformIO firmware, Expo app.

PaoloJN/openchess
A chessboard that knows where the pieces are: 64 Hall sensors, 81 RGB LEDs, one ESP32, a printed case, and a BLE phone app. KiCad hardware, PlatformIO firmware, Expo app.

Oxmose/EConBadge
E-Ink Convention Badge | Connected badge to display your favorite images and texts at convention.


koolcat6666/Engine-Simulator-2.0
Engine simulator for ECU testing based on ESP32-32U DevKitC. The system connects to the ECU through the standard Speeduino 40-pin IDC connector and generates signals to simulate real engine operation.

CarlRaymond/AnnaxFlipdotDriver
KiCad project for drivers for Annax flip-dot display panels



julianschick/flipdot-brose
Microcontroller code (ESP32) and Circuit Design for controlling Brose Flipdot Modules.

maximus64/opendiag-hardware
OpenDIAG - Open Source OBD2 Interface (Hardware)
It measures 58 × 71 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the 74AHCT125D, ESP32-DEVKITC-VE and TBD62783APG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PaoloJN/openchess repository on GitHub, at the commit this page was made from: the board is hardware/hardware-controller/openchess-controller.kicad_pcb and its schematic hardware/hardware-board/openchess-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask PaoloJN before reusing the design.