Skip to the content
2 layers282 × 282 mmOpenchess board, the printed circuit board in 3D

Openchess board

PaoloJN/openchess1

A chessboard that knows where the pieces are: 64 Hall sensors, 81 RGB LEDs, one ESP32, a printed case, and a BLE phone app. KiCad hardware, PlatformIO firmware, Expo app.

Size
282 × 282 mm
Copper layers
2
Thickness
1.6 mm
Parts
251
Nets
100
Pads
745
Tracks, vias
1,123, 255
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
3 Jun 2026
Updated
24 Oct 2026

Overview

Openchess board is an open-source printed circuit board by PaoloJN, from the PaoloJN/openchess repository on GitHub. It is a 2-layer board of 282 × 282 mm with 251 parts on 100 nets, routed with 1,123 tracks and 255 vias.

It is built around the DRV5032FCDBZ and WS2812B. Its parts include 90 capacitors, 81 diodes, 64 ICs, 8 resistors and 1 connector.

Main components

2

README

hardware/hardware-controller-v2/README.md

hardware-controller-v2 (shelved)

Status: shelved 2026-10-24, never fabricated. The schematic reached ERC-clean and layout was started. Dropped because the v0.1 controller with a battery-module swap does the job for a one-off board. Kept for reference.

Integrated controller: soldered ESP32-WROOM-32E + USB-C (CH340C) + BQ24074 power-path charger + TPS61022 5V boost + AMS1117-3.3. Replaces the v1 DevKitC + Lipo Rider Plus daughterboards.

  • Spec: docs/superpowers/specs/2026-07-27-controller-v2-integrated-design.md
  • Plan: docs/superpowers/plans/2026-07-27-controller-v2-integrated.md
  • GPIO map: docs/gpio-map.md (v2 table)
  • Part sourcing + design values: SOURCING.md

The KiCad files keep their original names (openchess-controller.*) within this directory; the directory name itself (hardware-controller-v2/) distinguishes v2 from frozen v1.

v1 (../hardware-controller/) is frozen — boards exist physically.

Parts

251
QtyValueFootprintReferences
81100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +65
81WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +65
64DRV5032FCPackage_TO_SOT_SMD:SOT-23U1, U2, U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23 +48
947uFCapacitor_SMD:C_1206_3216MetricC1, C2, C3, C4, C5, C6, C7, C8, C9
81kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3, R4, R5, R6, R7, R8
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3FiducialFiducial:Fiducial_1mm_Mask2mmFID1, FID2, FID3
1Conn_02x13Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_VerticalJ1

More from PaoloJN/openchess

2
  • 2 layersOpenchess controller, the printed circuit board in 3D

    Openchess controller

    PaoloJN/openchess

    A chessboard that knows where the pieces are: 64 Hall sensors, 81 RGB LEDs, one ESP32, a printed case, and a BLE phone app. KiCad hardware, PlatformIO firmware, Expo app.

    67 parts1
  • 2 layers58 × 71 mmOpenchess controller, the printed circuit board in 3D

    Openchess controller

    PaoloJN/openchess

    A chessboard that knows where the pieces are: 64 Hall sensors, 81 RGB LEDs, one ESP32, a printed case, and a BLE phone app. KiCad hardware, PlatformIO firmware, Expo app.

    28 parts1

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers26 × 30 mmMicrocontroller, the printed circuit board in 3D

    Microcontroller

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    34 parts1.1kCC-BY-4.0
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 2 layers95.3 × 161.9 mmDfh badge, the printed circuit board in 3D

    Dfh badge

    tanaes/whopping_Voron_mods

    135 parts787GPL-3.0
  • 2 layers42.8 × 28.8 mmMM Skirt, the printed circuit board in 3D

    MM Skirt

    PrintersForAnts/Micron

    If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)

    11 parts741GPL-3.0
  • 2 layers149.6 × 127.1 mmErgodash, the printed circuit board in 3D

    Ergodash

    omkbd/ErgoDash

    keyboard

    187 parts732MIT
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT
  • 2 layers177.7 × 144.5 mmCOMM PANEL, the printed circuit board in 3D

    COMM PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    275 parts431

Questions

How big is the Openchess board PCB?

It measures 282 × 282 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Openchess board use?

251 parts, built around the DRV5032FCDBZ and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Openchess board KiCad files?

From the PaoloJN/openchess repository on GitHub, at the commit this page was made from: the board is hardware/hardware-board/openchess-board.kicad_pcb and its schematic hardware/hardware-board/openchess-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Openchess board design in my own project?

Its repository states no licence, so its author keeps all rights: ask PaoloJN before reusing the design.