

RHS 3 Simple
- Size
- 21 × 104.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 33
- Pads
- 126
- Tracks, vias
- 450, 50
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Apr 2020
- Updated
- 12 Feb 2021
Overview
RHS 3 Simple is an open-source printed circuit board by pa-pa, from the pa-pa/HB-Sec-RHS-3 repository on GitHub. It is a 2-layer board of 21 × 104.5 mm with 35 parts on 33 nets, routed with 450 tracks and 50 vias.
It is built around the ATMEGA328P-AU and CC1101RGP. Its parts include 12 capacitors, 7 resistors, 5 ICs, 5 connectors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C9, C10, C13 |
| 4 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5, R6, R7 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3 |
| 3 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5, C6 |
| 3 | TLE4913 | Package_TO_SOT_SMD:SOT-23 | U1, U2, U3 |
| 2 | 1k5 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3 |
| 2 | 9p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C11, C12 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | ANT | Connector_Pin:Pin_D1.0mm_L10.0mm | J2 |
| 1 | ATMEGA328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | IC1 |
| 1 | Battery | libraries:CR2477_Surface_Mount | BT1 |
| 1 | CC1101 | libraries:CC1101_Module | IC2 |
| 1 | Config | libraries:MicroSwitch_3x4 | SW2 |
| 1 | Crystal_Small | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | Glass Breakage Detector | Connector_PinHeader_2.00mm:PinHeader_2x01_P2.00mm_Vertical_SMD | J1 |
| 1 | ISP 10 | Connector_PinHeader_2.00mm:PinHeader_2x05_P2.00mm_Vertical_SMD | P7 |
| 1 | ISP Bottom | libraries:ISP_Side | P4 |
| 1 | ISP Top | libraries:ISP_Side | P5 |
| 1 | LED Green | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LED Red | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | Reset | libraries:MicroSwitch_3x4 | SW1 |
More from pa-pa/HB-Sec-RHS-3
1- 2 layers51 × 61 mm

Similar boards
- 2 layers

- 2 layers17 × 19 mm

- 2 layers49.5 × 45 mm

- 2 layers20 × 40 mm

HM LC SW1-BA PCB mini MAX1724
der-pw/HM-LC-SW1-BA-PCB_mini_MAX1724
AskSin++ Batterieaktor mit MAX1724 Stepup
30 parts6 - 2 layers200.8 × 100.3 mm

- 2 layers17.8 × 24 mm

HM LC Sw1-Pl DN R1 OBII
der-pw/HM-LC-Sw1-Pl-DN-R1_OBII
Dieses Werk ist lizenziert unter einer Creative Commons Namensnennung - Nicht-kommerziell - Weitergabe unter gleichen Bedingungen 4.0 International Lizenz.
9 parts3 - 2 layers32.4 × 16.4 mm

- 2 layers53.1 × 26.9 mm

HM LC Bl1-FM DC
stan23/HM-LC-Bl1-FM-DC
Nachbau HM-LC-Bl1-FM Rollladenaktor für Gleichstrommotoren (z.B. Plissee)
32 parts2
Questions
How big is the RHS 3 Simple PCB?
It measures 21 × 104.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RHS 3 Simple use?
35 parts, built around the ATMEGA328P-AU and CC1101RGP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RHS 3 Simple KiCad files?
From the pa-pa/HB-Sec-RHS-3 repository on GitHub, at the commit this page was made from: the board is RHS_3_Simple.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RHS 3 Simple design in my own project?
Its repository states no licence, so its author keeps all rights: ask pa-pa before reusing the design.