
EtherDue
KarlZeilhofer/EtherDue-EMVC-PA-Monitor-2
The EtherDue is an 100% Arduino Due compatible board with onboard Ethernet.

HF-Amp Monitor based on EtherDue
EtherDue is an open-source printed circuit board by ottingerg, from the ottingerg/hf-amp400 repository on GitHub. It is a 4-layer board of 185 × 104 mm with 627 parts on 451 nets, routed with 9,252 tracks and 1,086 vias.
It is built around the MEU1S1212ZC, INA206AID and REG101NA-5/3K, with the ADL5513ACP, FDN340P and TPS7A4501DCQT among its other parts. Its parts include 240 capacitors, 140 resistors, 28 diodes, 24 crystals and 21 ICs. It belongs with the audio and music boards of this library.
HF-Amp400 is controllerboard designed to controll the gate biasing and output power of 2 double HF-AMP FETs.
It therefore provides 4 channels of gate biasing
4 channels of HF-Power mesaurement
2 resetable fuses up to 10A and one auxilary resetable fuse controll for even higher currents.
This project was done as collaberation between
EMV-Consulting (http://www.emvconsulting.at)
Otelo eGen (http://www.oteloegen.at)
and
Karl Zeilhofer (http://www.zeilhofer.co.at)
it is Open Source Hardware licensed under CC-BY-SA 3.0 and is based on EtherDue which itself is based on Arduino Due
The EtherDue is an 100% Arduino Due compatible board with onboard Ethernet.
For full details about the EtherDue, including a getting started guide, please visit the Freetronics EtherDue product page.
Design files were produced with Kicad. A PDF of the schematic is available.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | 100n/X7R | Capacitors_SMD:C_0603 | C1006, C1008, C1012, C1015, C1016, C1019, C1020, C1021, C1024, C1025, C1028, C1029, C1030, C1031, C1032, C1101 +28 |
| 39 | 10n/X7R | Capacitors_SMD:C_0603 | C1042, C1106, C1109, C1113, C1114, C1206, C1209, C1213, C1214, C1306, C1309, C1313, C1314, C1406, C1409, C1413 +23 |
| 29 | 1n/X7R | Capacitors_SMD:C_0603 | C1001, C1002, C1003, C1004, C1009, C1010, C1017, C1018, C1022, C1023, C1034, C1035, C1036, C1037, C1038, C1039 +13 |
| 28 | 100nF | SM0402 | C206, C207, C208, C301, C302, C503, C504, C509, C511, C512, C513, C514, C515, C516, C520, C521 +12 |
| 21 | 10u/25V/X7R | Capacitors_SMD:C_1206 | C801, C805, C806, C807, C813, C1013, C1026, C1033, C1108, C1112, C1208, C1212, C1308, C1312, C1408, C1412 +5 |
| 20 | SMB | zeilhofer:SMB-RS#420-5401_wirepad | X1001, X1002, X1003, X1004, X1005, X1006, X1007, X1008, X1009, X1010, X1011, X1012, X1102, X1103, X1202, X1203 +4 |
| 19 | 100R | Resistors_SMD:R_0603 | R1001, R1002, R1003, R1004, R1005, R1006, R1007, R1008, R1014, R1015, R1703, R1705, R1707, R1803, R1805, R1807 +3 |
| 17 | 0R | Resistors_SMD:R_0603 | R809, R810, R1103, R1106, R1203, R1206, R1303, R1306, R1403, R1406, R1708, R1709, R1808, R1809, R1908, R1909 +1 |
| 13 | BAT54S | w_smd_trans:sot23 | D101, D102, D103, D1001, D1002, D1003, D1004, D1501, D1601, D2001, D2002, D2003, D2004 |
| 13 | VAL** | Mounting_Holes:MountingHole_3mm | MountingHole_3mm, MountingHole_3mm, MountingHole_3mm, MountingHole_3mm, MountingHole_3mm, MountingHole_3mm, MountingHole_3mm, MountingHole_3mm, MountingHole_3mm, MountingHole_3mm, MountingHole_3mm, MountingHole_3mm, MountingHole_3mm |
| 12 | 100p/X7R | Capacitors_SMD:C_0603 | C1005, C1007, C1011, C1014, C1103, C1104, C1203, C1204, C1303, C1304, C1403, C1404 |
| 12 | 10k | Resistors_SMD:R_0603 | R1503, R1504, R1505, R1603, R1604, R1605, R1701, R1801, R1901, R2007, R2008, R2009 |
| 11 | 4k7 | Resistors_SMD:R_0603 | R104, R105, R1013, R1016, R1017, R1702, R1706, R1802, R1806, R1902, R1906 |
| 10 | BSS123 | zeilhofer:sot23-gsd | Q1501, Q1502, Q1601, Q1602, Q1701, Q1702, Q1801, Q1802, Q1901, Q1902 |
| 10 | JUMPER3 | Pin_Headers:Pin_Header_Straight_1x03 | JP101, JP102, JP801, JP1001, JP1002, JP1003, JP1004, JP1701, JP1801, JP1901 |
| 9 | 10uF | FT:SM0603_Capa | C210, C402, C403, C506, C507, C517, C518, C519, C528 |
| 9 | 1nF/X7R | Capacitors_SMD:C_0603 | C101, C102, C103, C104, C105, C106, C107, C108, C109 |
| 9 | WE-CBF-742792093 | Resistors_SMD:R_0805 | L804, L805, L1101, L1201, L1301, L1401, L1701, L1801, L1901 |
| 8 | 47n/C0G | Capacitors_SMD:C_0805 | C1105, C1107, C1205, C1207, C1305, C1307, C1405, C1407 |
| 8 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P1101, P1102, P1201, P1202, P1301, P1302, P1401, P1402 |
| 8 | YELLOW | zeilhofer:LED-0603 | D201, D202, D204, D302, D303, D601, D605, D606 |
| 7 | 10k | Potentiometers:Potentiometer_Bourns_3296W_3-8Zoll_Inline_ScrewUp | VR1001, VR1002, VR1003, VR1004, VR1701, VR1801, VR1901 |
| 7 | 1K | SM0402_r | R306, R307, R308, R309, R501, R606, R607 |
| 7 | 22pF | SM0402 | C201, C202, C205, C303, C304, C601, C602 |
| 7 | 2k2 | Resistors_SMD:R_0805 | R1105, R1205, R1305, R1405, R1710, R1810, R1910 |
| 7 | BSS308 | zeilhofer:sot23-gsd | Q1001, Q1703, Q1704, Q1803, Q1804, Q1903, Q1904 |
| 6 | 1n/X7R | Capacitors_SMD:C_0805 | C1707, C1708, C1807, C1808, C1907, C1908 |
| 5 | 10K | SM0402_r | R303, R310, R403, R503, R505 |
| 5 | MH2029-300Y | FT:MH2029 | L201, L501, L503, L504, L505 |
| 5 | PGB1010603 | FT:0603 | VR401, VR402, VR403, Z301, Z302 |
| 5 | REG101NA-5 | zeilhofer:DBV(R-PDSO-G5) | U804, U1102, U1202, U1302, U1402 |
| 4 | 100n/X7R | Capacitors_SMD:C_0805 | C1111, C1211, C1311, C1411 |
| 4 | 12k | Resistors_SMD:R_0805 | R1104, R1204, R1304, R1404 |
| 4 | 1k | Resistors_SMD:R_0603 | R103, R902, R1501, R1601 |
| 4 | 22pF | FT:C0402 | C404, C405, C406, C407 |
| 4 | 47p/C0G | Capacitors_SMD:C_0603 | C1110, C1210, C1310, C1410 |
| 4 | 52R3/1% | Resistors_SMD:R_0805 | R1101, R1201, R1301, R1401 |
| 4 | 5k6 | Resistors_SMD:R_0603 | R1009, R1010, R1011, R1012 |
| 4 | ADL5513 | zeilhofer:LFCSP16 | U1101, U1201, U1301, U1401 |
| 4 | RED | LEDs:LED-0805 | LED1001, LED1701, LED1801, LED1901 |
| 4 | SMA | zeilhofer:SMA-RS#616-3422 | X1101, X1201, X1301, X1401 |
| 3 | 10u/25V/X7R | SMD_Packages:SMD-1206_Pol | C604, C606, C608 |
| 3 | 1K | FT:RES_CAY16 | R206, R601, R604 |
| 3 | 1K5 | SM0402_r | R205, R207, R304 |
| 3 | 1k | Resistors_SMD:R_0805 | R1704, R1804, R1904 |
| 3 | 22k | Resistors_SMD:R_0603 | R803, R804, R806 |
| 3 | 2k7 | Resistors_SMD:R_0603 | R2004, R2005, R2006 |
| 3 | 47k | Resistors_SMD:R_0805 | R2001, R2002, R2003 |
| 3 | 4k7 | FT:0603 | R1712, R1812, R1912 |
| 3 | 91k | Resistors_SMD:R_0603 | R1711, R1811, R1911 |
| 3 | DNP | Capacitors_SMD:C_0603 | C1709, C1809, C1909 |
| 3 | FDN340P | FT:SOT23_MOSFET | U202, U503, U504 |
| 3 | GREEN | zeilhofer:LED-0603 | D203, D602, D603 |
| 3 | INA206 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U1702, U1801, U1901 |
| 3 | MEU1S1212ZC | zeilhofer:MEU1-Murata-DCDC | U1703, U1802, U1902 |
| 3 | OPEN | FT:SJ_OPEN | SJ201, SJ203, SJ601 |
| 3 | SW_PUSH | FT:SW_TACTILE_SMD | SW1701, SW1801, SW1901 |
| 3 | TPS7A4501DCQT | zeilhofer:DCQ(R-PDSO-G6) | U801, U802, U803 |
| 2 | 100K | FT:RES_CAY16 | R401, R502 |
| 2 | 100k | Resistors_SMD:R_0603 | R1502, R1602 |
| 2 | 100nF | Capacitors_SMD:C_0402 | C612, C613 |
| 2 | 10nF | SM0402 | C401, C505 |
| 2 | 18k | Resistors_SMD:R_0603 | R801, R802 |
| 2 | 1k3 | Resistors_SMD:R_0805 | R906, R907 |
| 2 | 1u/X7R | Capacitors_SMD:C_0805 | C1502, C1602 |
| 2 | 22R | SM0402_r | R301, R302 |
| 2 | 22pF_NM | SM0402 | C203, C204 |
| 2 | 2k2 | Resistors_SMD:R_0603 | R805, R807 |
| 2 | 2n2/50V/COG | Capacitors_SMD:C_0603 | C702, C802 |
| 2 | 33R | Resistors_SMD:R_0603 | R1018, R1019 |
| 2 | 39R 1% | SM0402_r | R202, R203 |
| 2 | 500mA PTC 1812 | SM1812 | F301, F401 |
| 2 | 60R | Resistors_SMD:R_0805 | R904, R905 |
| 2 | 677006144621 | zeilhofer:Firewire-Female-WE677006144621 | P901, P902 |
| 2 | CLOSED | FT:SJ_SHORTED | SJ202, SJ401 |
| 2 | DNP | Resistors_SMD:R_0603 | R2010, R2011 |
| 2 | IPB020NE7N3G | w_smd_trans:d2-pak | Q101, Q102 |
| 2 | MSTBV3 | eagle-con-phoenix-508:MSTBV3 | P102, P103 |
| 2 | SJ | FT:SJ_SHORTED | SJ701, SJ702 |
| 2 | Shunt 10mOhm | eagle-shunt:WSL4026 | R101, R102 |
The 545 most common of 627 parts.

KarlZeilhofer/EtherDue-EMVC-PA-Monitor-2
The EtherDue is an 100% Arduino Due compatible board with onboard Ethernet.




radioelf/Arduino-Due-mod-for-GPIO-compatible-Raspberry-Pi
PCB arduino Due para DuePi y Gpio Raspberry Pi



sirkha/3D-Components
These are various components and assemblies that I have modeled for use in designing 3D printed objects.
It measures 185 × 104 mm and has 4 copper layers, 1.6 mm thick.
627 parts, built around the MEU1S1212ZC, INA206AID, REG101NA-5/3K and ADL5513ACP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ottingerg/hf-amp400 repository on GitHub, at the commit this page was made from: the board is EtherDue.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ottingerg before reusing the design.