
ADL5513ACP
Analog Devices
1MHz to 4GHz, 80dB Logarithmic Detector/Controller
- Part id
- adi/ADL5513ACP
- Category
- Uncategorised
- Package
- QFN16
- Pins
- 17
- Used on
- 2 open-source boards
Overview
The ADL5513ACP is an uncategorised made by Analog Devices in a QFN16 package with 17 pins. 1MHz to 4GHz, 80dB Logarithmic Detector/Controller.
PCBKit's library has its KiCad symbol (Analog & Interface:ADL5513, from CERN's library) and its footprint (ICs And Semiconductors SMD:QFN50P300X300X100-17N-S165, from CERN's library), ready for a KiCad board. 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
17| Pin | Name | Type |
|---|---|---|
| 1 | VPOS | Power in |
| 2 | INHI | Input |
| 3 | INLO | Input |
| 4 | VPOS | Power in |
| 5 | NC | Passive |
| 6 | NC | Passive |
| 7 | NC | Passive |
| 8 | NC | Passive |
| 9 | TADJ | Input |
| 10 | COMM | Power in |
| 11 | VSET | Input |
| 12 | VOUT | Output |
| 13 | NC | Passive |
| 14 | CLPF | Output |
| 15 | NC | Passive |
| 16 | NC | Passive |
| 17 | EP | Power in |
Open-source boards using it
2- 4 layers185 × 104 mm

- 4 layers185 × 104 mm

EtherDue
KarlZeilhofer/EtherDue-EMVC-PA-Monitor-2
The EtherDue is an 100% Arduino Due compatible board with onboard Ethernet.
603 parts
Parts like it
1Questions
Is there a KiCad symbol and footprint for the ADL5513ACP?
Yes. The symbol is Analog & Interface:ADL5513 and the footprint ICs And Semiconductors SMD:QFN50P300X300X100-17N-S165, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADL5513ACP?
QFN16, with 17 pins. Its footprint is drawn on this page.
What can replace the ADL5513ACP?
Parts like it in the library: the LMK1D2102RGT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the ADL5513ACP?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.