4 layers115.5 × 96.2 mm
Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
245 parts19
2 layers100 × 82 mm
Simulator
OpenLogicEFI/Hardware19Hardware is based off an open source project called Speeduino by Josh Stewart.
- Size
- 100 × 82 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 103
- Pads
- 313
- Tracks, vias
- 379, 184
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 29 Mar 2020
- Updated
- 19 Oct 2026
Overview
Simulator is an open-source printed circuit board by OpenLogicEFI, from the OpenLogicEFI/Hardware repository on GitHub. It is a 2-layer board of 100 × 82 mm with 82 parts on 103 nets, routed with 379 tracks and 184 vias.
It is built around the 1206L100/24NR, AO3401A and BZT52C5V6. Its parts include 31 resistors, 20 diodes, 6 connectors, 4 capacitors and 4 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
1206L100/24NR
1206-40℃~+85℃ 1.2W 1.4mm 1.8A 1.9mm 1A 24V 3.6mm 300ms 300mΩ 40A 50mΩ 1206 Resettable Fuses ROHSLUTEResettable Fuses
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
BZT52C5V6
SOD-123Zener Diodeshongjiacheng
README
README.mdOpenLogicEFI
Formerly: DetonationEMS
OpenLogicEFI ECU's are based off an open source project called Speeduino by Josh Stewart. Currently all released boards use official Speeduino firmware. In TunerStudio set to "Board Layout" to "Speeduino 0.4"
License
All designs are released under the TAPR Open Hardware License v1.0
Documentation
-
The Official Speeduino Manual, documents and discord are the best places to start.
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R25, R26, R28 +9 |
| 4 | 470r | Resistor_SMD:R_0603_1608Metric | R21, R23, R27, R34 |
| 3 | 1206L100/24NR | Fuse:Fuse_1206_3216Metric | F1, F2, F3 |
| 3 | EL357NB_TA_-G | Package_SO:SOP-4_3.8x4.1mm_P2.54mm | IC1, IC2, IC3 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 2.2u | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 2 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J5, J6 |
| 2 | SS12D07VG4NSGAPA | Detonation:SS12D07VG4NSGAPA | S1, S2 |
| 1 | 100r | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric | R20 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | BZT52C5V6 | Diode_SMD:D_SOD-123 | D1 |
| 1 | CLT | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | POT2 |
| 1 | Conn_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2 |
| 1 | Conn_01x08 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-16-3.5-H_1x16_P3.50mm_Horizontal | J3 |
| 1 | Conn_01x10 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-12-3.5-H_1x12_P3.50mm_Horizontal | J4 |
| 1 | Conn_02x20_Counter_Clockwise | Connector_Automotive:IDC-Header_2x20_P2.54mm_Vertical_Speeduino | J1 |
| 1 | FAN | LED_SMD:LED_0603_1608Metric | LED17 |
| 1 | FP | LED_SMD:LED_0603_1608Metric | LED18 |
| 1 | IAT | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | POT1 |
| 1 | IGN1 | LED_SMD:LED_0603_1608Metric | LED9 |
| 1 | IGN2 | LED_SMD:LED_0603_1608Metric | LED10 |
| 1 | IGN3 | LED_SMD:LED_0603_1608Metric | LED11 |
| 1 | IGN4 | LED_SMD:LED_0603_1608Metric | LED12 |
| 1 | IGN5 | LED_SMD:LED_0603_1608Metric | LED13 |
| 1 | IGN6 | LED_SMD:LED_0603_1608Metric | LED14 |
| 1 | IGN7 | LED_SMD:LED_0603_1608Metric | LED15 |
| 1 | IGN8 | LED_SMD:LED_0603_1608Metric | LED16 |
| 1 | INJ1 | LED_SMD:LED_0603_1608Metric | LED1 |
| 1 | INJ2 | LED_SMD:LED_0603_1608Metric | LED2 |
| 1 | INJ3 | LED_SMD:LED_0603_1608Metric | LED3 |
| 1 | INJ4 | LED_SMD:LED_0603_1608Metric | LED4 |
| 1 | INJ5 | LED_SMD:LED_0603_1608Metric | LED5 |
| 1 | INJ6 | LED_SMD:LED_0603_1608Metric | LED6 |
| 1 | INJ7 | LED_SMD:LED_0603_1608Metric | LED7 |
| 1 | INJ8 | LED_SMD:LED_0603_1608Metric | LED8 |
| 1 | Jumper_2_Open | Detonation:SolderJumper-2_P1.3mm_Open_Rounded_NOCOURTYARD | JP1 |
| 1 | LOGO | Detonation-Logos:open-logic-10 | G*** |
| 1 | Logo_Open_Hardware_Small | Detonation-Logos:SpeeduinoCompatible-17mm | G2 |
| 1 | MAP/SP1 | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | POT3 |
| 1 | RPM | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | POT6 |
| 1 | SP1- | LED_SMD:LED_0603_1608Metric | LED19 |
| 1 | SW_DIP_x03 | Button_Switch_THT:SW_DIP_SPSTx03_Slide_9.78x9.8mm_W7.62mm_P2.54mm | S3 |
| 1 | Switch | Button_Switch_THT:SW_PUSH_6mm_H9.5mm | SW1 |
| 1 | TPS | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | POT4 |
| 1 | o2 | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | POT5 |
Questions
How big is the Simulator PCB?
It measures 100 × 82 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Simulator use?
82 parts, built around the 1206L100/24NR, AO3401A and BZT52C5V6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Simulator KiCad files?
From the OpenLogicEFI/Hardware repository on GitHub, at the commit this page was made from: the board is Engine Simulation/8 Channel/RevD/Simulator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Simulator design in my own project?
Its repository states no licence, so its author keeps all rights: ask OpenLogicEFI before reusing the design.
More from OpenLogicEFI/Hardware
12- 2 layers115.5 × 96.2 mm
Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
223 parts19 - 2 layers98.8 × 69.8 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
167 parts19 - 2 layers100 × 99.8 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
166 parts19 - 4 layers98.8 × 69.8 mm
SparkGapX4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
166 parts19 - 2 layers98.8 × 69.8 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
159 parts19 - 2 layers100 × 100 mm
1.3e
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
157 parts19 - 2 layers100 × 99.8 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
152 parts19 - 2 layers100 × 100 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
142 parts19 - 2 layers100 × 100 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
141 parts19 - 2 layers100 × 100 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
136 parts19 - 2 layers98.2 × 53.3 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
104 parts19
Similar boards
- 4 layers60 × 60 mm
Ummon
JonaWe/ummon
ummon (from German Umgebungsmonitor, "environment monitor") is an ESP32-C6 based environmental sensor board with USB-C power.
95 parts - 2 layers50 × 65 mm
Chufe v-0-rev a
piruetasxyz/kicad-visor-demo
A working example of kicad-visor by piruetas: on every push to main, a GitHub Actions workflow exports every KiCad project in this repository (schematics, board layers, 3D renders and seamlessly looping turntable…
23 parts1 - 2 layers115 × 85 mm
Bitaxetuner fan board
Elemirus1996/BitaxeTuner
Automatisches Übertakten, Benchmarken und 24/7-Überwachung für Bitaxe- und NerdAxe-Miner – Windows-App und Server für Raspberry Pi, Windows und Docker: Browser & Handy-App, Push, Pool-Steuerung, Ertrag gegen…
60 partsGPL-3.0 - 2 layers54 × 47.5 mm
PCB updi unbricker
k-takata/PCB_updi_unbricker
UPDI High Voltage programmer for AVR Dx/Ex and ATtiny series
63 parts - 2 layers50 × 65 mm
- 4 layers25.4 × 25.4 mm
Twonkie
dojoe/Twonkie
A USB-PD sniffer/injector/sink based on Google's Twinkie, re-designed to be manufactured by mere mortals.
62 parts415 - 4 layers100 × 100 mm
STM32Inverter
Zychlix/Inverter32
An open source, open hardware plug'n'play 3 phase motor inverter design. It
154 parts4 - 2 layers60 × 27 mm
BSH Dev Board
Bouni/BSH-Dev-Board
This project is one of many variants of a PCB that can be used to interface with B/S/H appliances using the awsome bsh-home-appliances project.
67 parts