4 layers115.5 × 96.2 mm
Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
245 parts19
2 layers100 × 80 mm
Simulator
OpenLogicEFI/Hardware19Hardware is based off an open source project called Speeduino by Josh Stewart.
- Size
- 100 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 98
- Pads
- 254
- Tracks, vias
- 328, 105
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Mar 2020
- Updated
- 19 Oct 2026
Overview
Simulator is an open-source printed circuit board by OpenLogicEFI, from the OpenLogicEFI/Hardware repository on GitHub. It is a 2-layer board of 100 × 80 mm with 73 parts on 98 nets, routed with 328 tracks and 105 vias.
It is built around the AO3400A and SS34. Its parts include 28 resistors, 21 diodes, 11 connectors, 2 transistors and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdOpenLogicEFI
Formerly: DetonationEMS
OpenLogicEFI ECU's are based off an open source project called Speeduino by Josh Stewart. Currently all released boards use official Speeduino firmware. In TunerStudio set to "Board Layout" to "Speeduino 0.4"
License
All designs are released under the TAPR Open Hardware License v1.0
Documentation
-
The Official Speeduino Manual, documents and discord are the best places to start.
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 470 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R10, R11, R12, R13, R14, R15, R17, R18, R19, R20, R21, R23, R27 +7 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R24, R25, R26, R28 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x03 | Detonation:3-PinSwitch | J8, J9 |
| 2 | Conn_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J4, J5 |
| 2 | Conn_01x08 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-8-3.5-H_1x08_P3.50mm_Horizontal | J2, J3 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | CLT | MyLibs:RV09AF4020KB10K | POT2 |
| 1 | Cam Trigger Voltage | Detonation:3-PinSwitch | J11 |
| 1 | Conn_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J6 |
| 1 | Conn_01x10 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-10-3.5-H_1x10_P3.50mm_Horizontal | J7 |
| 1 | Conn_02x20_Counter_Clockwise | Connector_Automotive:IDC-Header_2x20_P2.54mm_Vertical_Speeduino | J1 |
| 1 | Crank Trigger Voltage | Detonation:3-PinSwitch | J10 |
| 1 | FAN | LED_SMD:LED_0603_1608Metric | LED17 |
| 1 | FP | LED_SMD:LED_0603_1608Metric | LED18 |
| 1 | IAT | MyLibs:RV09AF4020KB10K | POT1 |
| 1 | IGN1 | LED_SMD:LED_0603_1608Metric | LED9 |
| 1 | IGN2 | LED_SMD:LED_0603_1608Metric | LED10 |
| 1 | IGN3 | LED_SMD:LED_0603_1608Metric | LED11 |
| 1 | IGN4 | LED_SMD:LED_0603_1608Metric | LED12 |
| 1 | IGN5 | LED_SMD:LED_0603_1608Metric | LED13 |
| 1 | IGN6 | LED_SMD:LED_0603_1608Metric | LED14 |
| 1 | IGN7 | LED_SMD:LED_0603_1608Metric | LED15 |
| 1 | INJ1 | LED_SMD:LED_0603_1608Metric | LED1 |
| 1 | INJ2 | LED_SMD:LED_0603_1608Metric | LED2 |
| 1 | INJ3 | LED_SMD:LED_0603_1608Metric | LED3 |
| 1 | INJ4 | LED_SMD:LED_0603_1608Metric | LED4 |
| 1 | INJ5 | LED_SMD:LED_0603_1608Metric | LED5 |
| 1 | INJ6 | LED_SMD:LED_0603_1608Metric | LED6 |
| 1 | INJ7 | LED_SMD:LED_0603_1608Metric | LED7 |
| 1 | INJ8 | LED_SMD:LED_0603_1608Metric | LED8 |
| 1 | Logo_Open_Hardware_Small | Detonation-Logos:SpeeduinoCompatible-17mm | G2 |
| 1 | Logo_Open_Hardware_Small | Detonation-Logos:DetonationEMS-30mm | G1 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | G3 |
| 1 | MAP/SP1 | MyLibs:RV09AF4020KB10K | POT3 |
| 1 | RPM | MyLibs:RV09AF4020KB10K | POT6 |
| 1 | SP1- | LED_SMD:LED_0603_1608Metric | LED20 |
| 1 | SP2- | LED_SMD:LED_0603_1608Metric | LED19 |
| 1 | SS34 | Diode_SMD:D_SOD-123 | D1 |
| 1 | Switch | Button_Switch_THT:SW_PUSH_6mm_H9.5mm | SW1 |
| 1 | TPS | MyLibs:RV09AF4020KB10K | POT4 |
| 1 | locked | LED_SMD:LED_0603_1608Metric | LED16 |
| 1 | o2 | MyLibs:RV09AF4020KB10K | POT5 |
Questions
How big is the Simulator PCB?
It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Simulator use?
73 parts, built around the AO3400A and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Simulator KiCad files?
From the OpenLogicEFI/Hardware repository on GitHub, at the commit this page was made from: the board is Engine Simulation/8 Channel/RevA/Simulator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Simulator design in my own project?
Its repository states no licence, so its author keeps all rights: ask OpenLogicEFI before reusing the design.
More from OpenLogicEFI/Hardware
12- 2 layers115.5 × 96.2 mm
Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
223 parts19 - 2 layers98.8 × 69.8 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
167 parts19 - 2 layers100 × 99.8 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
166 parts19 - 4 layers98.8 × 69.8 mm
SparkGapX4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
166 parts19 - 2 layers98.8 × 69.8 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
159 parts19 - 2 layers100 × 100 mm
1.3e
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
157 parts19 - 2 layers100 × 99.8 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
152 parts19 - 2 layers100 × 100 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
142 parts19 - 2 layers100 × 100 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
141 parts19 - 2 layers100 × 100 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
136 parts19 - 2 layers98.2 × 53.3 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
104 parts19
Similar boards
- 2 layers191.5 × 76 mm
Pcb project
CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support
337 parts117GPL-3.0 - 8 layers100 × 60 mm
YAMMU ControlBoard v05
Zergie/YAMMU
A Multi Material Unit (MMU) for eight filaments that can also function as a filament dryer and can keep it dry while printing. The design is heavily inspired by voron and their printers.
234 parts107GPL-3.0 - 2 layers148.6 × 192.2 mm
Badge
NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software
169 parts31GPL-3.0 - 2 layers70 × 65 mm
Fluepdot
Fluepke/Fluepdot
Project for controlling Annax flipdot panels used by the Berliner Verkehrsbetriebe
116 parts17AGPL-3.0 - 2 layers48.2 × 57 mm
Sunlu S1-Board
Pegoku/Sunlu-S1-Board
Drop-in replacement controller board for the Sunlu S1 filament dryer.
58 parts15 - 4 layers154.5 × 112.9 mm
LibrePLC32
AndreiVladescu/LibrePLC32
The goal of the project is to create a compact, hackable, and well-documented PLC platform for industrial automation experiments, prototyping, education, and open hardware development.
295 parts14CERN-OHL-P-2.0 - 4 layers144 × 127 mm
Frothfet
hoeken/frothfet
Yarrboard load controller board with current sense, volt sense, fuses, and sender support.
394 parts14GPL-3.0 - 2 layers58 × 20 mm
CCCCPPPS MkII
BogdanTheGeek/CCCCPPPS
Cheap Crappy Constant Current Portable Programmable Power Supply
30 parts12MIT