
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

Unicorn shaped ESP32 and WS2812b board - CTF hardware
UnicornPCB is an open-source printed circuit board by oliverhanka, from the oliverhanka/UnicornPCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 85 mm with 31 parts on 39 nets, routed with 197 tracks and 10 vias.
It is built around the WS2812B and 1N4148W. Its parts include 17 diodes, 4 capacitors, 3 resistors, 2 connectors and 1 switch.
Unicorn shaped ESP32 and WS2812b board - CTF hardware
This PCB has been created as a CTF hardware/badge. It features a Wemos D1 style ESP32 as well as 15 WS2812b LEDs, push button and Seeed Studios's Grove Connector for extentability. Power is obtained form the ESP32 board.
Open Source Hardware
Frontside of the assembled PCB:
Backside of the assembled PCB:
Board test firmware included. Requires ESP32 SDK and Arduino NeoPixel library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D9, D10, D11, D12, D13, D14, D15, D16, D17 |
| 4 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2, C3, C4 |
| 2 | 1N4148W | Diode_SMD:D_SOD-123 | D7, D8 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R3 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | Conn_01x10_Male_LEFT | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical_SMD_Pin1Right | J1 |
| 1 | Conn_01x10_Male_RIGHT | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical_SMD_Pin1Right | J2 |
| 1 | LOGO | unicorn_pcb:ctf2_logo | G*** |
| 1 | LOGO | unicorn_pcb:unicorn_silkscreen_top | G*** |
| 1 | SMD 90 | grove:grove-SMD-2.0-90D_new | Grove1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
The 30 most common of 31 parts.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io


ozkan/Cockpit-Keyboard
A hot swap system column staggered mechanical keyboard, running QMK Firmware on Pro Micro controllers.

ozkan/skywatch
35% ergonomic ortholinear keyboard, powered by RP2040, along with OLED and hotswap sockets support

NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software

sadekbaroudi/euclid36
At the time of creation, using Kicad 5.1.9 - This may not work with future versions


tumler/ReviungDash
Single Body Mechanical Keyboard inspired by the Reviung and Ergodash keyboards
It measures 100 × 85 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the WS2812B and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the oliverhanka/UnicornPCB repository on GitHub, at the commit this page was made from: the board is pcb/kicad/unicorn_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).