
Dev board
iamdarshg/dev-board
Self-contained project: board + schematics + libraries. Unzip anywhere and open dev-real.kicadpro in KiCad 9.

Board src is an open-source printed circuit board by olagd, from the olagd/praca_dyplomowa repository on GitHub. It is a 2-layer board of 220 × 150 mm with 169 parts on 232 nets, routed with 1,648 tracks and 115 vias.
It is built around the DS18B20+, FT232RNL-TUBE and MCP3202-CI/P, with the 112J-TDAR-R01, M24C02-WMN6TP and PCF8563TS/5 among its other parts. Its parts include 52 resistors, 42 connectors, 21 diodes, 13 capacitors and 13 switches.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R4, R23, R24, R25, R29, R30, R31, R32, R33, R34, R35, R36, R37, R38 +1 |
| 12 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C5, C6, C7, C8, C9, C10, C11, C12, C13 |
| 10 | 1301.9319 | Button_Switch_THT:SW_PUSH_6mm_H9.5mm | S2, S4, S6, S7, S8, S9, S10, S11, S12, S13 |
| 10 | green | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED1, LED2, LED3, LED4, LED6, LED8, LED10, LED12, LED14, LED16 |
| 9 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7, R11, R12, R39, R40, R41, R42 |
| 8 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26, R43, R45, R46, R47, R48, R49, R50 |
| 8 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R13, R14, R15, R16, R17, R18, R19 |
| 5 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J35, J36, J38, J42, J43 |
| 5 | VS-10BQ015-M3/5BT | Diode_SMD:D_SMB_Handsoldering | D1, D2, D3, D4, D5 |
| 5 | red | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED7, LED9, LED11, LED13, LED15 |
| 4 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7, J8, J17, J18 |
| 4 | Conn_01x20_Socket | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J2, J3, J15, J16 |
| 4 | Conn_02x20_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1, J13, J14, J20 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H5, H6, H7, H8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 4 | SS8550-L | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q3, Q4, Q5, Q6 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R20, R51 |
| 3 | CL-SB-12C-01 | footprints:JS102011CQN | S1, S3, S5 |
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J22, J23, J25 |
| 3 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J21, J30, J31 |
| 3 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J10, J11, J12 |
| 3 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4, J5, J6 |
| 3 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J34, J37, J39 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R22 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27, R28 |
| 2 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J24, J28 |
| 2 | PT6KV-103A20-PM | footprints:PT6KV251A2020 | VR1, VR2 |
| 2 | SS8050-L | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q2, Q7 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 10K | footprints:PT6KV251A2020 | RV1 |
| 1 | 10p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 112J-TDAR-R01 | footprints:112JTDARR01 | J29 |
| 1 | 32.768kHz | Crystal:Crystal_AT310_D3.0mm_L10.0mm_Horizontal | Y1 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 50 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R52 |
| 1 | ASMT-YTB2-0BB02 | footprints:ASMT-YTC7-0AA02 | LED5 |
| 1 | BSS123 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J27 |
| 1 | CA56-21SURKWA | footprints:wyswietlacz7x4 | DS2 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J44 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J26 |
| 1 | Conn_01x16_Socket | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J40 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J32 |
| 1 | Conn_02x07_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J41 |
| 1 | DS18B20+ | Package_TO_SOT_THT:TO-92L_Inline_Wide | IC1 |
| 1 | FT232RNL-TUBE | footprints:SOP65P780X200-28N | IC3 |
| 1 | HC28010-D | footprints:hc28010-d | DS1 |
| 1 | M24C02-WMN6TP | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | IC2 |
| 1 | MCP3202 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | IC4 |
| 1 | MCP4921-E_P | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | IC5 |
| 1 | PCF8563TS | Package_SO:TSSOP-8_3x3mm_P0.65mm | U1 |
| 1 | UGCM0903XP4.5IC | footprints:BMT0905XH05 | LS1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J33 |

iamdarshg/dev-board
Self-contained project: board + schematics + libraries. Unzip anywhere and open dev-real.kicadpro in KiCad 9.

porast1/suspension-telemetry
Suspension telemetry system for mountain bike or dirt bike

Merix-Industries/CanSat-STM-PCB
A custom-designed PCB for a CanSat project, built around the STM32F405RGT microcontroller. The board integrates all essential subsystems for atmospheric data collection, positioning, and communication into a single…


KrystianRuszczak/BioSense
The hardware design files in this directory are licensed under CERN-OHL-P-2.0. See LICENSE.

ageppert/Core16-Interactive-Core-Memory
Weave 16 bits of core memory and LEDs to interact with using a magnetic wand


It measures 220 × 150 mm and has 2 copper layers, 1.6 mm thick.
169 parts, built around the DS18B20+, FT232RNL-TUBE, MCP3202-CI/P and 112J-TDAR-R01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the olagd/praca_dyplomowa repository on GitHub, at the commit this page was made from: the board is board_src/board.kicad_pcb and its schematic board_src/board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask olagd before reusing the design.