
Rtcbrd
adlerweb/uPoff
Small circuit/library to shut down a µC to save power for battery powered applications

The PCF8563TS/5 is a real Time Clock made by NXP Semiconductors in a TSSOP-8-3mm package with 8 pins. -40℃~+85℃ 0.25uA 1.8V~5.5V 250nA I2C Watchdog timer、Programmable clock output、Alarm function、Countdown timer Yes TSSOP-8-3mm Real Time Clocks ROHS.
PCBKit's library has its KiCad symbol (Timer_RTC:PCF8563TS, from KiCad's library) and its footprint (Package_SO:TSSOP-8_4.4x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 9,345 are in stock at JLCPCB (part C27397). 13 open-source boards in 10 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| 电源电压 VDD | min -0.5 · max 6.5 V | 27 | |
| 电源电流 IDD | min -50 · max 50 mA | 27 | |
| 输入电压 VI | 引脚 SCL、SDA 和 OSCI 上 | min -0.5 · max 6.5 V | 27 |
| 输出电压 VO | 引脚 CLKOUT 和 INT 上 | min -0.5 · max 6.5 V | 27 |
| 输入电流 II | 采用任何输入时 | min -10 · max 10 mA | 27 |
| 输出电流 IO | 采用任何输出时 | min -10 · max 10 mA | 27 |
| 总功耗 Ptot | max 300 mW | 27 | |
| 静电放电电压 VESD | CDM; TSSOP8 (PCF8563TS/5); ±1750 V | max 1750 V | 27 |
| 锁存电流 Ilu | 通过水平;最高环境温度下,依据 JESD78 | max 200 mA | 27 |
| 存储温度 Tstg | min -65 · max 150 ℃ | 27 | |
| 环境温度 Tamb | 操作设备 | min -40 · max 85 ℃ | 27 |
| 电源电压 VDD | 接口无效;fSCL = 0 Hz;Tamb = 25 °C | min 1 · max 5.5 V | 28 |
| 电源电压 VDD | 接口有效;fSCL = 400 kHz | min 1.8 · max 5.5 V | 28 |
| 电源电压 VDD | 时钟数据完整性;Tamb = 25 °C;最小值 Vlow | max 5.5 V | 28 |
| 电源电流 IDD | 接口有效;fSCL = 400 kHz | max 800 uA | 28 |
| 电源电流 IDD | 接口有效;fSCL = 100 kHz | max 200 uA | 28 |
| 电源电流 IDD | 接口无效(fSCL = 0 Hz);CLKOUT 已禁用;Tamb = 25 °C;VDD = 5.0 V | typ 275 · max 550 nA | 28 |
| 电源电流 IDD | 接口无效(fSCL = 0 Hz);CLKOUT 已禁用;Tamb = 25 °C;VDD = 3.0 V | typ 250 · max 500 nA | 28 |
| 电源电流 IDD | 接口无效(fSCL = 0 Hz);CLKOUT 已禁用;Tamb = 25 °C;VDD = 2.0 V | typ 225 · max 450 nA | 28 |
| 电源电流 IDD | 接口无效(fSCL = 0 Hz);CLKOUT 已禁用;Tamb = –40 °C 至+85 °C;VDD = 5.0 V | typ 500 · max 750 nA | 28 |
| 电源电流 IDD | 接口无效(fSCL = 0 Hz);CLKOUT 已禁用;Tamb = –40 °C 至+85 °C;VDD = 3.0 V | typ 400 · max 650 nA | 28 |
| 电源电流 IDD | 接口无效(fSCL = 0 Hz);CLKOUT 已禁用;Tamb = –40 °C 至+85 °C;VDD = 2.0 V | typ 400 · max 600 nA | 28 |
| 电源电流 IDD | 接口无效(fSCL = 0 Hz);CLKOUT 在 32 kHz 时启用;Tamb = 25 °C;VDD = 5.0 V | typ 825 · max 1600 nA | 28 |
| 电源电流 IDD | 接口无效(fSCL = 0 Hz);CLKOUT 在 32 kHz 时启用;Tamb = 25 °C;VDD = 3.0 V | typ 550 · max 1000 nA | 28 |
| 电源电流 IDD | 接口无效(fSCL = 0 Hz);CLKOUT 在 32 kHz 时启用;Tamb = 25 °C;VDD = 2.0 V | typ 425 · max 800 nA | 28 |
| 电源电流 IDD | 接口无效(fSCL = 0 Hz);CLKOUT 在 32 kHz 时启用;Tamb = –40 °C 至+85 °C;VDD = 5.0 V | typ 950 · max 1700 nA | 28 |
| 电源电流 IDD | 接口无效(fSCL = 0 Hz);CLKOUT 在 32 kHz 时启用;Tamb = –40 °C 至+85 °C;VDD = 3.0 V | typ 650 · max 1100 nA | 28 |
| 电源电流 IDD | 接口无效(fSCL = 0 Hz);CLKOUT 在 32 kHz 时启用;Tamb = –40 °C 至+85 °C;VDD = 2.0 V | typ 500 · max 900 nA | 28 |
| 低电平输入电压 VIL | 最大值 +0.3VDD | min -0.5 V | 28 |
| 高电平输入电压 VIH | 最小值 0.7VDD | max 5.5 V | 28 |
| 输入漏电流 ILI | VI =VDD 或 VSS | min -1 · typ 0 · max 1 uA | 28 |
| 输入电容 Ci | 基于样品进行测试 | max 7 pF | 28 |
| 低电平输出电流 IOL | 输出吸电流;VOL = 0.4 V;VDD = 5 V;在引脚 SDA 上 | min 3 mA | 29 |
| 低电平输出电流 IOL | 输出吸电流;VOL = 0.4 V;VDD = 5 V;在引脚 INT 上 | min 1 mA | 29 |
| 低电平输出电流 IOL | 输出吸电流;VOL = 0.4 V;VDD = 5 V;在引脚 CLKOUT 上 | min 1 mA | 29 |
| 输出泄漏电流 ILO | VO =VDD 或 VSS | min -1 · typ 0 · max 1 uA | 29 |
| 低电压 Vlow | Tamb =25 °C;设置位 VL;参见图 6 | typ 0.9 · max 1 V | 29 |
| 引脚 OSCO 的电容 COSCO | min 15 · typ 25 · max 35 pF | 30 | |
| 相关的振荡器频率变化 Δfosc/fosc | ΔVDD = 200 mV;Tamb =25 °C | typ 0.2 ppm | 30 |
| 串联电阻 Rs | 石英晶体参数(f = 32.768 kHz) | max 100 kΩ | 30 |
| 负载电容 CL | 石英晶体参数(f = 32.768 kHz);并行 | min 7 · max 12.5 pF | 30 |
| 微调电容 Ctrim | 外部;在引脚 OSCI 上 | min 5 · max 25 pF | 30 |
| 引脚 CLKOUT 上的占空比 δCLKOUT | typ 50 % | 30 | |
| SCL 时钟频率 fSCL | max 400 kHz | 30 | |
| (重复)START 条件的保持时间 tHD;STA | min 0.6 us | 30 | |
| 重复 START 条件的建立时间 tSU;STA | min 0.6 us | 30 | |
| SCL 时钟的低电平周期 tLOW | min 1.3 us | 30 | |
| SCL 时钟的高电平周期 tHIGH | min 0.6 us | 30 | |
| SDA 和 SCL 信号的上升时间 tr | 标准模式 | max 1 us | 30 |
| SDA 和 SCL 信号的上升时间 tr | 快速模式 | max 0.3 us | 30 |
| Pin | Name | Type |
|---|---|---|
| 1 | OSCI | Input |
| 2 | OSCO | Output |
| 3 | INT | Output |
| 4 | VSS | Power in |
| 5 | SDA | Input/output |
| 6 | SCL | Input |
| 7 | CLKO | Output |
| 8 | VDD | Power in |

adlerweb/uPoff
Small circuit/library to shut down a µC to save power for battery powered applications


Thecactusman0/Nebula-openwatch
Nebula is a ESP32 based smartwatch that features a rotating bezel encoder




<iframe src="https://pcbkit.io/embed/parts/nxp/PCF8563TS/5" title="PCF8563TS/5 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/nxp/PCF8563TS/5.jpg" alt="PCF8563TS/5" width="1200" height="900">[](https://pcbkit.io/parts/nxp/PCF8563TS/5)Yes. The symbol is Timer_RTC:PCF8563TS and the footprint Package_SO:TSSOP-8_4.4x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
TSSOP-8-3mm, with 8 pins. Its footprint is drawn on this page.
NXP Semiconductors publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C27397, with 9,345 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the BM8563EHA by GATEMODE, the PCF85063ATT/AJ by NXP Semiconductors, the BL5372T by BL and the PT7C4372ALEX by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.
13 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.