4 layers104.9 × 57.3 mm
4 layers227.8 × 132.5 mm
Panel
YDrip/ydrip-pcb2YDrip hardware files
- Size
- 227.8 × 132.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 556
- Nets
- 324
- Pads
- 1,300
- Tracks, vias
- 2,208, 620
- Pours
- 42
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Jul 2023
- Updated
- 28 Nov 2024
Overview
Panel is an open-source printed circuit board by YDrip, from the YDrip/ydrip-pcb repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 4-layer board of 227.8 × 132.5 mm with 556 parts on 324 nets, routed with 2,208 tracks and 620 vias.
It is built around the SLG47004V, ESP32-S3-WROOM-1-N8 and SLG88103V, with the ALT021-10E, IN-PI22TAT5R5G5B and PCF8563TS/5 among its other parts. Its parts include 88 resistors, 80 capacitors, 32 ICs, 20 connectors and 16 transistors. It belongs with the ESP32 boards of this library.
Main components
12
SLG47004V
STQFN-24(3x3)STQFN-24(3x3) Programmable Logic Device (CPLDs/FPGAs) ROHSRenesas ElectronicsProgrammable Logic Device (CPLDs/FPGAs)
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
SLG88103V
STDFN-10(2x2)-40℃~+85℃ 0.3pA 1.71V~5.5V 100dB 10kHz 10mA 195nV/√Hz@1kHz 1uV/℃ 2 200uV 2pA 380nA 5V/ms Enable/shutdown function Rail-to-Rail Input, Rail-to-Rail Output STDFN-10(2x2) Operational Amplifier ROHSRenesas ElectronicsOperational AmplifierALT021-10E
DFN-6_2.5x2.5mmUncategorisedNVE
IN-PI22TAT5R5G5B
SMD-4P,2.7x2.4mmUncategorisedInolux
PCF8563TS/5
TSSOP-8-3mm-40℃~+85℃ 0.25uA 1.8V~5.5V 250nA I2C Watchdog timer、Programmable clock output、Alarm function、Countdown timer Yes TSSOP-8-3mm Real Time Clocks ROHSNXP SemiconductorsReal Time Clocks
RT9080-33GJ5
TSOT-23-5-40℃~+125℃@(Tj) 1 2uA 3.3V 360mV@(600mA) 42uVrms 5.5V 600mA 75dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
ABS07-32.768KHZ-T
SMD3215-2P-40℃~+85℃ 12.5pF 32.768kHz 70kΩ Crystal Oscillator ±20ppm SMD3215-2P Crystals ROHSAbraconCrystals
BSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
PTS526SK15SMTR2LFS
SMD-4P,5.2x5.2mm-20℃~+70℃ 12V 2.5N 5.2mm 5.2mm 50mA Gull Wing IP40 No Round Button SPST-NO Surface Mount,Vertical With Bracket SMD-4P,5.2x5.2mm Tactile Switches ROHSC&KTactile Switches
MF-NSMF110-2
1206-40℃~+85℃ 1.6mm 130mΩ 2.2A 3.2mm 30mΩ 600mW 6V 1206 Resettable Fuses ROHSBournsResettable Fuses
README
README.mdOpen-Source Water Meter Hardware Design
Description
This repository contains the open-source hardware design files for a water meter. The design was created using KiCad 6.
Features
- High-precision water metering
- Low power consumption
- Compact and cost-effective design
- Compatible with standard water metering infrastructure
- Customizable digital logic
Details
Panalization command
kikit panelize \
--layout 'grid; rows: 2; cols: 2; space: 2mm' \
--tabs 'fixed; width: 8mm; vcount: 2; hcount: 1'\
--cuts 'mousebites; drill: 0.5mm; spacing: 1mm; offset: 0.2mm; prolong: 0.5mm'\
--framing 'frame; width: 5mm; space: 3mm;'\
--copperfill solid\
--post 'millradius: 1mm;' water_meter.kicad_pcb panel.kicad_pcbLicense
This project is licensed under the CERN Open Hardware Licence Version 2 - Weakly Reciprocal. Please see the LICENSE.txt file for more details.
Parts
556| Qty | Value | Footprint | References |
|---|---|---|---|
| 280 | NPTH | NPTH | KiKit_MB_10_1, KiKit_MB_10_2, KiKit_MB_10_3, KiKit_MB_10_4, KiKit_MB_10_5, KiKit_MB_10_6, KiKit_MB_10_7, KiKit_MB_10_8, KiKit_MB_10_9, KiKit_MB_10_10, KiKit_MB_11_1, KiKit_MB_11_2, KiKit_MB_11_3, KiKit_MB_11_4, KiKit_MB_11_5, KiKit_MB_11_10 +264 |
| 28 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C14, C14, C14, C14, C15, C15, C15, C15, C17, C17, C17, C17, C18, C18, C18, C18 +12 |
| 16 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R1, R1, R1, R9, R9, R9, R9, R12, R12, R12, R12, R20, R20, R20, R20 |
| 16 | 22pF | Capacitor_SMD:C_0805_2012Metric | C1, C1, C1, C1, C2, C2, C2, C2, C7, C7, C7, C7, C13, C13, C13, C13 |
| 16 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H1, H1, H1, H2, H2, H2, H2, H3, H3, H3, H3, H4, H4, H4, H4 |
| 12 | 100pF | Capacitor_SMD:C_0805_2012Metric | C11, C11, C11, C11, C12, C12, C12, C12, C16, C16, C16, C16 |
| 12 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3, C3, C3, C3, C9, C9, C9, C9, C10, C10, C10, C10 |
| 12 | 4.7k | Resistor_SMD:R_0805_2012Metric | R5, R5, R5, R5, R6, R6, R6, R6, R7, R7, R7, R7 |
| 8 | 0 | Resistor_SMD:R_0805_2012Metric | R2, R2, R2, R2, R3, R3, R3, R3 |
| 8 | 100k | Resistor_SMD:R_0805_2012Metric | R8, R8, R8, R8, R15, R15, R15, R15 |
| 8 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21, R21, R21, R21, R22, R22, R22, R22 |
| 8 | 10M | Resistor_SMD:R_0805_2012Metric | R10, R10, R10, R10, R14, R14, R14, R14 |
| 8 | 10uF | Capacitor_SMD:C_0805_2012Metric | C5, C5, C5, C5, C8, C8, C8, C8 |
| 8 | 1M | Resistor_SMD:R_0805_2012Metric | R18, R18, R18, R18, R19, R19, R19, R19 |
| 8 | 50k | Resistor_SMD:R_0805_2012Metric | R16, R16, R16, R16, R17, R17, R17, R17 |
| 8 | ABS07-32.768KHZ-T | Nabil:XTAL_ABS07-32.768KHZ-T | Y1, Y1, Y1, Y1, Y2, Y2, Y2, Y2 |
| 8 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1, Q1, Q2, Q2, Q2, Q2 |
| 8 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q3, Q3, Q3, Q3, Q4, Q4, Q4, Q4 |
| 8 | PTS526_SK15_SMTR2_LFS | Nabil:PTS526SK15SMTR2LFS | S1, S1, S1, S1, S2, S2, S2, S2 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R4, R4, R4, R4 |
| 4 | 22uF | Capacitor_SMD:C_0805_2012Metric | C4, C4, C4, C4 |
| 4 | 2465 | Nabil:2465 | J6, J6, J6, J6 |
| 4 | 2k | Resistor_SMD:R_0805_2012Metric | R11, R11, R11, R11 |
| 4 | 500R | Resistor_SMD:R_0805_2012Metric | R13, R13, R13, R13 |
| 4 | ALT021-10E | Nabil:SON65P250X250X80-7N | U3, U3, U3, U3 |
| 4 | Conn_01x02_Female | Nabil:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J1, J1, J1, J1 |
| 4 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5, J5, J5, J5 |
| 4 | Conn_01x06_Male | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3, J3, J3, J3 |
| 4 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1U | U2, U2, U2, U2 |
| 4 | IN-PI22TAT5R5G5B | Nabil:INPI22TAT5R5G5B | U6, U6, U6, U6 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D2, D2, D2, D2 |
| 4 | MB85RC64TA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8, U8, U8, U8 |
| 4 | MF-NSMF110 | Fuse:Fuse_1206_3216Metric | F1, F1, F1, F1 |
| 4 | PCF8563TS | Package_SO:MSOP-8_3x3mm_P0.65mm | U5, U5, U5, U5 |
| 4 | RT9080-33GJ5 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1, U1, U1, U1 |
| 4 | SLG47004V | Nabil:STQFN-24-3.0X3.0-A | U4, U4, U4, U4 |
| 4 | SLG88103V | Nabil:SLG88103V | U9, U9, U9, U9 |
| 4 | USB_B_Micro | Nabil:USB_Micro-B_Molex-105133-0001 | J4, J4, J4, J4 |
Questions
How big is the Panel PCB?
It measures 227.8 × 132.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Panel use?
556 parts, built around the SLG47004V, ESP32-S3-WROOM-1-N8, SLG88103V and ALT021-10E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel KiCad files?
From the YDrip/ydrip-pcb repository on GitHub, at the commit this page was made from: the board is panel.kicad_pcb and its schematic sensors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from YDrip/ydrip-pcb
2- 2 layers106.2 × 84 mm
Similar boards
- 4 layers50 × 50 mm
MagneticSensors
Michalek007/MastersThesis
Investigation of magnetic field sensors for applications in low-frequency magnetic field measurements
56 parts - 4 layers201.2 × 95 mm
Prime Maxel v3
nagapi2357-ui/Prime_Maxel-v3
V3 torsion ring PCB — original experiment showed apparent prime-ratio advantages, but a subsequent pre-registered replication (Plan C, pure sine waves) returned null on 7/8 metrics.
150 parts - 4 layers43.2 × 43.2 mm
Pogobot head
nekonaute/pogobot
Pogobot is an open-source open-hardware robotic platform for swarm robotics
140 parts21 - 6 layers159.3 × 60.8 mm
Combolite2
ekundo/combolite
ComboLite: плата расширения для «Вектора-06Ц» — квазидиски, IDE, дисковод, AY, VGA, Wi-Fi
187 parts2GPL-3.0 - 2 layers101.4 × 69.4 mm
- 2 layers40 × 20 mm
- 2 layers320.8 × 138.7 mm
- 2 layers43 × 43 mm
