

Water meter
YDrip hardware files
- Size
- 104.9 × 57.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 81
- Pads
- 255
- Tracks, vias
- 552, 155
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Jul 2023
- Updated
- 28 Nov 2024
Overview
Water meter is an open-source printed circuit board by YDrip, from the YDrip/ydrip-pcb repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 4-layer board of 104.9 × 57.3 mm with 69 parts on 81 nets, routed with 552 tracks and 155 vias.
It is built around the SLG47004V, ESP32-S3-WROOM-1-N8 and SLG88103V, with the ALT021-10E, IN-PI22TAT5R5G5B and PCF8563TS/5 among its other parts. Its parts include 22 resistors, 20 capacitors, 8 ICs, 5 connectors and 4 transistors. It belongs with the ESP32 boards of this library.
Main components
12SLG47004V
STQFN-24(3x3)STQFN-24(3x3) Programmable Logic Device (CPLDs/FPGAs) ROHSRenesas ElectronicsProgrammable Logic Device (CPLDs/FPGAs)ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesSLG88103V
STDFN-10(2x2)-40℃~+85℃ 0.3pA 1.71V~5.5V 100dB 10kHz 10mA 195nV/√Hz@1kHz 1uV/℃ 2 200uV 2pA 380nA 5V/ms Enable/shutdown function Rail-to-Rail Input, Rail-to-Rail Output STDFN-10(2x2) Operational Amplifier ROHSRenesas ElectronicsOperational AmplifierALT021-10E
DFN-6_2.5x2.5mmUncategorisedNVEIN-PI22TAT5R5G5B
SMD-4P,2.7x2.4mmUncategorisedInoluxPCF8563TS/5
TSSOP-8-3mm-40℃~+85℃ 0.25uA 1.8V~5.5V 250nA I2C Watchdog timer、Programmable clock output、Alarm function、Countdown timer Yes TSSOP-8-3mm Real Time Clocks ROHSNXP SemiconductorsReal Time ClocksRT9080-33GJ5
TSOT-23-5-40℃~+125℃@(Tj) 1 2uA 3.3V 360mV@(600mA) 42uVrms 5.5V 600mA 75dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsABS07-32.768KHZ-T
SMD3215-2P-40℃~+85℃ 12.5pF 32.768kHz 70kΩ Crystal Oscillator ±20ppm SMD3215-2P Crystals ROHSAbraconCrystalsBSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)PTS526SK15SMTR2LFS
SMD-4P,5.2x5.2mm-20℃~+70℃ 12V 2.5N 5.2mm 5.2mm 50mA Gull Wing IP40 No Round Button SPST-NO Surface Mount,Vertical With Bracket SMD-4P,5.2x5.2mm Tactile Switches ROHSC&KTactile SwitchesMF-NSMF110-2
1206-40℃~+85℃ 1.6mm 130mΩ 2.2A 3.2mm 30mΩ 600mW 6V 1206 Resettable Fuses ROHSBournsResettable Fuses
README
README.mdOpen-Source Water Meter Hardware Design

Description
This repository contains the open-source hardware design files for a water meter. The design was created using KiCad 6.
Features
- High-precision water metering
- Low power consumption
- Compact and cost-effective design
- Compatible with standard water metering infrastructure
- Customizable digital logic
Details
Panalization command
kikit panelize \
--layout 'grid; rows: 2; cols: 2; space: 2mm' \
--tabs 'fixed; width: 8mm; vcount: 2; hcount: 1'\
--cuts 'mousebites; drill: 0.5mm; spacing: 1mm; offset: 0.2mm; prolong: 0.5mm'\
--framing 'frame; width: 5mm; space: 3mm;'\
--copperfill solid\
--post 'millradius: 1mm;' water_meter.kicad_pcb panel.kicad_pcbLicense
This project is licensed under the CERN Open Hardware Licence Version 2 - Weakly Reciprocal. Please see the LICENSE.txt file for more details.
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C6, C14, C15, C17, C18, C19, C20 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R9, R12, R20 |
| 4 | 22pF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C7, C13 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100pF | Capacitor_SMD:C_0805_2012Metric | C11, C12, C16 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3, C9, C10 |
| 3 | 4.7k | Resistor_SMD:R_0805_2012Metric | R5, R6, R7 |
| 2 | 0 | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R8, R15 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21, R22 |
| 2 | 10M | Resistor_SMD:R_0805_2012Metric | R10, R14 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C5, C8 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R18, R19 |
| 2 | 50k | Resistor_SMD:R_0805_2012Metric | R16, R17 |
| 2 | ABS07-32.768KHZ-T | Nabil:XTAL_ABS07-32.768KHZ-T | Y1, Y2 |
| 2 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4 |
| 2 | PTS526_SK15_SMTR2_LFS | Nabil:PTS526SK15SMTR2LFS | S1, S2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 2465 | Nabil:2465 | J6 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 500R | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | ALT021-10E | Nabil:SON65P250X250X80-7N | U3 |
| 1 | Conn_01x02_Female | Nabil:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J1 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06_Male | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1U | U2 |
| 1 | IN-PI22TAT5R5G5B | Nabil:INPI22TAT5R5G5B | U6 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | MB85RC64TA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | MF-NSMF110 | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | PCF8563TS | Package_SO:MSOP-8_3x3mm_P0.65mm | U5 |
| 1 | RT9080-33GJ5 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | SLG47004V | Nabil:STQFN-24-3.0X3.0-A | U4 |
| 1 | SLG88103V | Nabil:SLG88103V | U9 |
| 1 | USB_B_Micro | Nabil:USB_Micro-B_Molex-105133-0001 | J4 |
More from YDrip/ydrip-pcb
2- 4 layers227.8 × 132.5 mm

- 2 layers106.2 × 84 mm

Similar boards
- 4 layers50 × 50 mm

MagneticSensors
Michalek007/MastersThesis
Investigation of magnetic field sensors for applications in low-frequency magnetic field measurements
56 parts - 4 layers201.2 × 95 mm

Prime Maxel v3
nagapi2357-ui/Prime_Maxel-v3
V3 torsion ring PCB — original experiment showed apparent prime-ratio advantages, but a subsequent pre-registered replication (Plan C, pure sine waves) returned null on 7/8 metrics.
150 parts - 4 layers43.2 × 43.2 mm

Pogobot head
nekonaute/pogobot
Pogobot is an open-source open-hardware robotic platform for swarm robotics
140 parts21 - 6 layers159.3 × 60.8 mm

Combolite2
ekundo/combolite
ComboLite: плата расширения для «Вектора-06Ц» — квазидиски, IDE, дисковод, AY, VGA, Wi-Fi
187 parts2GPL-3.0 - 2 layers101.4 × 69.4 mm

- 2 layers40 × 20 mm

- 2 layers320.8 × 138.7 mm

- 2 layers43 × 43 mm

Questions
How big is the Water meter PCB?
It measures 104.9 × 57.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Water meter use?
69 parts, built around the SLG47004V, ESP32-S3-WROOM-1-N8, SLG88103V and ALT021-10E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Water meter KiCad files?
From the YDrip/ydrip-pcb repository on GitHub, at the commit this page was made from: the board is water_meter.kicad_pcb and its schematic sensors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Water meter design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).