4 layers35 × 35 mm
AD8429
Michalek007/MastersThesis
Investigation of magnetic field sensors for applications in low-frequency magnetic field measurements
38 parts
4 layers50 × 50 mm
MagneticSensors
Michalek007/MastersThesisInvestigation of magnetic field sensors for applications in low-frequency magnetic field measurements
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.57 mm
- Parts
- 56
- Nets
- 38
- Pads
- 156
- Tracks, vias
- 258, 122
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Jun 2026
- Updated
- 28 Sep 2026
Overview
MagneticSensors is an open-source printed circuit board by Michalek007, from the Michalek007/MastersThesis repository on GitHub. It is a 4-layer board of 50 × 50 mm with 56 parts on 38 nets, routed with 258 tracks and 122 vias.
It is built around the HMC1001-RC, ALT021-10E and MIC5219-5.0YM5-TR, with the FDC6333C among its other parts. Its parts include 19 capacitors, 15 resistors, 9 connectors, 5 ICs and 1 transistor. It belongs with the sensors and measurement boards of this library.
Main components
4
HMC1001-RC
SIP-8-40℃~+85℃ 2V~12V SIP-8 Magnetic Angle Sensors ROHSHoneywellMagnetic Angle SensorsALT021-10E
DFN-6_2.5x2.5mmUncategorisedNVE
MIC5219-5.0YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 12V 3uA 500mA 5V 600mV@(500mA) 75dB@(120Hz) Fixed Over Current Protection、Thermal shutdown、Enable control、Reverse polarity voltage protection、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
FDC6333C
SuperSOT-6-55℃~+150℃ 1 N-Channel + 1 P-Channel 2.5A 220mΩ@4.5V 26pF 282pF 30V 3V 56pF 6.6nC@10V 960mW N-Channel + P-Channel SuperSOT-6 MOSFETs ROHSonsemiMOSFETs
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12, R13, R14, R15 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6, R7, R8 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C10, C11 |
| 4 | 100p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C19, C20, C22 |
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C6, C12, C13 |
| 4 | 22n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C16, C18, C21 |
| 4 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J4, J6 |
| 4 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7, J8, J9, J10 |
| 4 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2, JP3, JP4, JP5 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP6, JP7 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 2.2u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 200 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 470p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | ALT021-10E | MagneticSensors:2.5x2.5DFN6 | IC1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | DRV425RTJT | MagneticSensors:QFN50P400X400X80-21N-D | IC3 |
| 1 | DRV5055A1xLPGxQ1 | Package_TO_SOT_THT:TO-92_Inline | U2 |
| 1 | FDC6333C | MagneticSensors:SOT95P275X110-6N | Q1 |
| 1 | HMC1001-RC | MagneticSensors:HMC1001RC | IC2 |
| 1 | MIC5219-5.0YM5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
More from Michalek007/MastersThesis
2- 2 layers60 × 40 mm
CurrentSource
Michalek007/MastersThesis
Investigation of magnetic field sensors for applications in low-frequency magnetic field measurements
34 parts
Similar boards
- 2 layers148.6 × 192.2 mm
Badge
NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software
169 parts31GPL-3.0 - 4 layers227.8 × 132.5 mm
- 4 layers42 × 62 mm
- 4 layers252 × 152 mm
CTA control board
PySpice-org/eda-rw
Python library to read/write KiCad and LibrePCB Sexpr file format
619 parts9 - 2 layers57.8 × 34 mm
DangerDonut
gavin4d/dangerDonut
Danger Donut is a work-in-progress 150 gram melty brain combat robot.
65 parts5 - 2 layers50.8 × 22.9 mm
Sensori FeatherWing
bergold/Sensori-FeatherWing
This FeatherWing lets you connect your Feather to a RS-485 bus. It also provides various ways of providing power to your RS-485 bus system, as well as the ability to back-power the Feather from the bus.
21 parts1 - 2 layers21 × 50 mm
Atmega32u4 dev board
Coolbots7/development-boards
Collection of PCBs for testing core designs.
39 parts1 - 2 layers
Questions
How big is the MagneticSensors PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.57 mm thick.
What parts does the MagneticSensors use?
56 parts, built around the HMC1001-RC, ALT021-10E, MIC5219-5.0YM5-TR and FDC6333C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MagneticSensors KiCad files?
From the Michalek007/MastersThesis repository on GitHub, at the commit this page was made from: the board is hardware/MagneticSensors/MagneticSensors.kicad_pcb and its schematic hardware/AD8429/AD8429.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MagneticSensors design in my own project?
Its repository states no licence, so its author keeps all rights: ask Michalek007 before reusing the design.