

MCU Board
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 17
- Pads
- 76
- Tracks, vias
- 107, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Oct 2022
- Updated
- 9 Feb 2025
Overview
MCU Board is an open-source printed circuit board by Aurekana, from the Aurekana/SwbusMk2 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 33 parts on 17 nets, routed with 107 tracks and 5 vias.
It is built around the ATTINY85-20SU and MIC5219-5.0YM5-TR. Its parts include 19 connectors, 5 resistors, 4 diodes, 3 capacitors and 2 ICs. It belongs with the microcontroller boards boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MIC5219-5.0YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 12V 3uA 500mA 5V 600mV@(500mA) 75dB@(120Hz) Fixed Over Current Protection、Thermal shutdown、Enable control、Reverse polarity voltage protection、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdSwbusMk2
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Conn_01x01 | MountingHole:MountingHole_2.2mm_M2 | J9, J10, J11, J12, J13 |
| 4 | Conn_01x01 | Connector_Wire:SolderWire-2sqmm_1x01_D2mm_OD3.9mm | J1, J2, J7, J8 |
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J18, J19, J21, J22 |
| 2 | 3.6V | Diode_SMD:D_SOD-323_HandSoldering | D2, D3 |
| 2 | 68 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | Conn_01x04 | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J4, J16 |
| 1 | 1.5K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 500 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | ATtiny85-20SU | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | Conn_01x02 | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J6 |
| 1 | Conn_01x04 | Connector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical | J20 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D4 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | MIC5219-5.0YM5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | USB_B_Micro | Connector_USB:USB_Mini-B_Tensility_54-00023_Vertical | J5 |
More from Aurekana/SwbusMk2
1- 2 layers

Similar boards
- 4 layers252 × 152 mm

CTA control board
PySpice-org/eda-rw
Python library to read/write KiCad and LibrePCB Sexpr file format
619 parts9 - 2 layers57.8 × 34 mm

DangerDonut
gavin4d/dangerDonut
Danger Donut is a work-in-progress 150 gram melty brain combat robot.
65 parts5 - 2 layers50.8 × 22.9 mm

Sensori FeatherWing
bergold/Sensori-FeatherWing
This FeatherWing lets you connect your Feather to a RS-485 bus. It also provides various ways of providing power to your RS-485 bus system, as well as the ability to back-power the Feather from the bus.
21 parts1 - 2 layers21 × 50 mm

Atmega32u4 dev board
Coolbots7/development-boards
Collection of PCBs for testing core designs.
39 parts1 - 4 layers92.7 × 59.3 mm

- 2 layers47.8 × 61.3 mm

- 4 layers36 × 36 mm

- 2 layers83.5 × 66 mm

Questions
What parts does the MCU Board use?
33 parts, built around the ATTINY85-20SU and MIC5219-5.0YM5-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MCU Board KiCad files?
From the Aurekana/SwbusMk2 repository on GitHub, at the commit this page was made from: the board is Prototype/40-KICAD/LED_Board/MCU_Board/MCU_Board.kicad_pcb and its schematic Prototype/40-KICAD/Control_Board/MainBoard/MainBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MCU Board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).