4 layers58 × 40 mm
2 layers83.5 × 66 mm
Name Plate Class Project
lendres/PCB-Name-Plate-Class-Project- Size
- 83.5 × 66 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 125
- Nets
- 66
- Pads
- 403
- Tracks, vias
- 786, 107
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 May 2020
- Updated
- 30 Aug 2020
Overview
Name Plate Class Project is an open-source printed circuit board by lendres, from the lendres/PCB-Name-Plate-Class-Project repository on GitHub, published under the MIT licence. It is a 2-layer board of 83.5 × 66 mm with 125 parts on 66 nets, routed with 786 tracks and 107 vias.
It is built around the ATSAMD11C14A-SSN, ATMEGA328P-AU and BME280, with the BNO055, MIC5219-3.3YM5-TR and MIC5219-5.0YM5-TR among its other parts. Its parts include 37 capacitors, 32 resistors, 7 ICs, 6 diodes and 6 switches. It belongs with the AVR (ATmega, ATtiny) and SAM D and SAM boards of this library.
Main components
9
ATSAMD11C14A-SSN
SOIC-14-40℃~+105℃ 1.62V~3.63V 10bit 12 12bit 16KB 32 Bit 48MHz 4KB ARM Cortex-M0+ Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
BME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity Sensor
BNO055
LGA-28(3.8x5.2)-40℃~+85℃ 2.4V~3.6V 40uA I2C、UART IMU X,Y,Z X,Y,Z ±16g ±2000dps LGA-28(3.8x5.2) Accelerometers ROHSBosch SensortecAccelerometers
MIC5219-3.3YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 12V 170uA 3.3V 500mA 600mV@(500mA) 75dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMIC5219-5.0YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 12V 3uA 500mA 5V 600mV@(500mA) 75dB@(120Hz) Fixed Over Current Protection、Thermal shutdown、Enable control、Reverse polarity voltage protection、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
PRTR5V0U2X,215
-UncategorisedNXP Semiconductors
Parts
125| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | Test Point | FrequentlyUsed:Pad_2.5-2.5 | TP201, TP202, TP203, TP301, TP401, TP402, TP403, TP404, TP405, TP501, TP502, TP503, TP504, TP505, TP506, TP601 +9 |
| 21 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C101, C105, C106, C201, C203, C303, C304, C305, C306, C401, C402, C403, C404, C405, C501, C601 +5 |
| 7 | 22 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R301, R801, R802, R803, R804, R805, R806 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R101, R104, R105, R501, R601, R602 |
| 5 | 12k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R401, R402, R405, R407, R409 |
| 5 | 43k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R403, R404, R406, R408, R410 |
| 5 | Button B3FS | Name_Plate_Class_Project:Button_B3FS-1000P | S401, S402, S403, S404, S405 |
| 4 | 10pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C607, C608, C702, C703 |
| 4 | 10uF | Name_Plate_Class_Project:T491A106K010AT | C202, C204, C301, C302 |
| 4 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D301, D302, D303, D304 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R202, R203 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C103, C104 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R502, R503 |
| 2 | 32.7680 kHz | Name_Plate_Class_Project:Oscillator_MC-405_32.7680K-D__ROHS | Y601, Y701 |
| 2 | 4.75k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R102, R103 |
| 2 | 470pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C205, C206 |
| 1 | 0.12uF | Capacitor_SMD:C_0805_2012Metric_HandSolder | C603 |
| 1 | 0.12uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C102 |
| 1 | 16.00 MHz | Name_Plate_Class_Project:Oscillator_ABM3-16.000MHZ-B2-T | Y101 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R504 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C502 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R302 |
| 1 | 6.8nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C602 |
| 1 | ATSAMD11C14A-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U501 |
| 1 | ATmega328P-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U101 |
| 1 | BK-883 | Name_Plate_Class_Project:BAT_BK-883 | B701 |
| 1 | BLUE LED | Name_Plate_Class_Project:LED_G-GX | D305 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U602 |
| 1 | BNO055 | Package_LGA:LGA-28_5.2x3.8mm_P0.5mm | U601 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q201 |
| 1 | Battery Connector | Name_Plate_Class_Project:JST_PH_w_SolderPoints | J201 |
| 1 | Battery Switch | Name_Plate_Class_Project:Switch_JS202011SCQN | S201 |
| 1 | Conn Header SMD | Name_Plate_Class_Project:Molex_PinHeader_2x03 | J101 |
| 1 | DNP | Name_Plate_Class_Project:LCD_ER-TFTM024-3_SMD | J801 |
| 1 | Jumper | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R201 |
| 1 | MCP7940N-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U701 |
| 1 | MIC5219-3.3YM5-TR | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U202 |
| 1 | MIC5219-5.0YM5-TR | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U201 |
| 1 | Net-Tie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | PRTR5V0U2X,215 | Name_Plate_Class_Project:SOT-143-4 | D501 |
| 1 | Piezo Buzzer | Name_Plate_Class_Project:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | LS301 |
| 1 | SAMD11 Header | Name_Plate_Class_Project:SAMTEC-FTS-105-01-X-DV | J502 |
| 1 | USB_B_Mini | Name_Plate_Class_Project:Molex_USB_Mini_B_548190572 | J501 |
Similar boards
- 2 layers47.8 × 61.3 mm
- 2 layers80 × 100 mm
- 2 layers218 × 98.8 mm
- 2 layers341.8 × 158.5 mm
Ws2812-clock
CommanderRedYT/ws2812-clock
A simple pcb clock using ws2812 in 7-segment form
533 parts2GPL-3.0 - 4 layers72.5 × 87.3 mm
Mouse V1
great-houk/mouse-project
Contains all the relevant folders for the entire custom mouse project
138 parts158MIT - 2 layers39.1 × 50.1 mm
Case smd challenge
CASE-Association/smd-challenge
Our CASE branded SMD Challenge. Do you have what it takes to complete it?
31 parts1 - 2 layers36.6 × 39 mm
Questions
How big is the Name Plate Class Project PCB?
It measures 83.5 × 66 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Name Plate Class Project use?
125 parts, built around the ATSAMD11C14A-SSN, ATMEGA328P-AU, BME280 and BNO055. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Name Plate Class Project KiCad files?
From the lendres/PCB-Name-Plate-Class-Project repository on GitHub, at the commit this page was made from: the board is Name Plate Class Project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Name Plate Class Project design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).