

TARC2026
- Size
- 36 × 36 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 42
- Nets
- 65
- Pads
- 180
- Tracks, vias
- 260, 63
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Jun 2025
- Updated
- 26 Jun 2025
Overview
TARC2026 is an open-source printed circuit board by Kev1n8088, from the Kev1n8088/TARC2026 repository on GitHub. It is a 4-layer board of 36 × 36 mm with 42 parts on 65 nets, routed with 260 tracks and 63 vias.
It is built around the ICM-45686, MIC5219-5.0YM5-TR and TXB0108RGY, with the WS2812B-2020, AO3401A and SMD26PL-TP among its other parts. Its parts include 10 capacitors, 9 resistors, 6 connectors, 5 ICs and 3 diodes. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
6ICM-45686
LGA-14(3x2.5)-40℃~+85℃ 1.71V~3.6V 16bit 2.2uA 8KB IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±32g ±4000dps LGA-14(3x2.5) Accelerometers ROHSTDK InvenSenseAccelerometersMIC5219-5.0YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 12V 3uA 500mA 5V 600mV@(500mA) 75dB@(120Hz) Fixed Over Current Protection、Thermal shutdown、Enable control、Reverse polarity voltage protection、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTXB0108RGY
VQFN-20-EP(3.5x4.5)-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 8 Automatic direction detection、Power-off protection、Output enable high-impedance Bidirectional Level translator Tri-State VQFN-20-EP(3.5x4.5) Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersWS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSMD26PL-TP
SOD-123FL-65℃~+150℃ 1 Independent 100uA@60V 2A 50A 60V 700mV@2A SOD-123FL Schottky Diodes ROHSMicro Commercial ComponentsSchottky Diodes
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R7, R12, R13, R20, R23 |
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C47, C48, C50, C51 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C4 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SRV 1 | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | J2, J3 |
| 2 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1, D2 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C49 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 32.768khz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y3 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 470pF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 47R | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 51k | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BATT | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J10 |
| 1 | Conn_01x04_MountingPin | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J1 |
| 1 | ELEC ARM | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J4 |
| 1 | ICM-45686 | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U4 |
| 1 | MIC5219-5.0YM5 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | SMD26PL-TP | Diode_SMD:D_SOD-123F | D3 |
| 1 | TXB0108RGY | Package_DFN_QFN:Texas_RGY_R-PVQFN-N20_EP2.05x3.05mm | U6 |
| 1 | Teensy4.0 | teensy:Teensy40 | U1 |
| 1 | UART1 5V | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J7 |
| 1 | ~ | Package_LGA:ST_HLGA-10_2x2mm_P0.5mm_LayoutBorder3x2y | U2 |
The 41 most common of 42 parts.
Similar boards
- 4 layers50 × 100 mm

- 4 layers30 × 77 mm

- 2 layers99 × 99 mm

Pyramid of brightness
WilmervH/pyramid-of-brightness
This was supposed to be a pyramid (or more of a triagle) but I thought I'd be too difficult to arrange the pixels in a neat way. So I made it a square. The name stuck.
294 partsAGPL-3.0 - 6 layers230 × 56 mm

- 2 layers65.8 × 100.9 mm

- 4 layers25.4 × 57.2 mm

- 4 layers252 × 152 mm

CTA control board
PySpice-org/eda-rw
Python library to read/write KiCad and LibrePCB Sexpr file format
619 parts9 - 2 layers57.8 × 34 mm

DangerDonut
gavin4d/dangerDonut
Danger Donut is a work-in-progress 150 gram melty brain combat robot.
65 parts5
Questions
How big is the TARC2026 PCB?
It measures 36 × 36 mm and has 4 copper layers, 1.61 mm thick.
What parts does the TARC2026 use?
42 parts, built around the ICM-45686, MIC5219-5.0YM5-TR, TXB0108RGY and WS2812B-2020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TARC2026 KiCad files?
From the Kev1n8088/TARC2026 repository on GitHub, at the commit this page was made from: the board is TARC2026.kicad_pcb and its schematic TARC2026.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TARC2026 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kev1n8088 before reusing the design.