
CTA control board
PySpice-org/eda-rw
Python library to read/write KiCad and LibrePCB Sexpr file format

This FeatherWing lets you connect your Feather to a RS-485 bus. It also provides various ways of providing power to your RS-485 bus system, as well as the ability to back-power the Feather from the bus.
Sensori FeatherWing is an open-source printed circuit board by bergold, from the bergold/Sensori-FeatherWing repository on GitHub. It is a 2-layer board of 50.8 × 22.9 mm with 21 parts on 34 nets, routed with 90 tracks and 2 vias.
It is built around the MIC5219-5.0YM5-TR and B3U-1000P. Its parts include 6 connectors, 3 capacitors, 3 resistors, 2 ICs and 2 switches.
This FeatherWing lets you connect your Feather to a RS-485 bus. It also provides various ways of providing power to your RS-485 bus system, as well as the ability to back-power the Feather from the bus.
The bus connector is compatible to the Sensorimotor system. (It's a 4-pin Molex Mini-SPOX)

Warning: Usually Feathers don’t have a reverse USB back-feed protection. You might damage your USB port when the „Power>Feather“ switch is on. So, always turn it off before connecting a USB cable to the Feather.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x04 | Connector_Molex:Molex_SPOX_5267-04A_1x04_P2.50mm_Vertical | J2, J3, J4 |
| 2 | LOGO | Gretchen:gretchen_logo_bmp | G***, G*** |
| 1 | 0.1 µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1 µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10 kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 10 µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 120 Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 120 Ω | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 5-12 V, max. 5A | Connector_BarrelJack:BarrelJack_Horizontal | J5 |
| 1 | Adafruit_Feather_Generic | Module:Adafruit_Feather_WithMountingHoles | A1 |
| 1 | B3U-1000P | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | D_Schottky | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | LTC2850xMS8 | Package_SO:MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | MIC5219-5.0YM5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | RS485 Dir | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | SW_SPST | SensoriFeatherWing:SW_DS04-254-1L-01BK | SW2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J6 |

PySpice-org/eda-rw
Python library to read/write KiCad and LibrePCB Sexpr file format

gavin4d/dangerDonut
Danger Donut is a work-in-progress 150 gram melty brain combat robot.

Coolbots7/development-boards
Collection of PCBs for testing core designs.





It measures 50.8 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the MIC5219-5.0YM5-TR and B3U-1000P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bergold/Sensori-FeatherWing repository on GitHub, at the commit this page was made from: the board is SensoriFeatherWing.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bergold before reusing the design.