
Base
florolf/lab-automation
Plugs into relay and can be used to provide switchable 5V USB power to downstream devices.

midi controller 8 channels x3 faders
Midi controller is an open-source printed circuit board by rland93, from the rland93/midi8x3 repository on GitHub. It is a 4-layer board of 200 × 150 mm with 190 parts on 151 nets, routed with 246 tracks and 34 vias.
It is built around the CD4051BM96, M24C02-WMN6TP and SRV05-4, with the XC6206P332MR-G, SS8050 and GZ2012D601TF among its other parts. Its parts include 74 resistors, 36 capacitors, 11 diodes, 10 transistors and 9 switches. It belongs with the audio and music boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | 100 | Resistor_SMD:R_0603_1608Metric | R4, R10, R11, R12, R13, R18, R19, R20, R21, R27, R28, R29, R30, R33, R39, R40 +17 |
| 32 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C21, C22, C23, C24 +16 |
| 23 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R15, R16, R17, R22, R23, R26, R35, R36, R37, R43, R51, R53, R54 +7 |
| 16 | 10K | Potentiometer_THT:Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV9, RV10, RV11, RV12, RV13, RV14, RV15, RV16, RV17, RV18, RV19, RV20, RV21, RV22, RV23, RV24 |
| 12 | 220 | Resistor_SMD:R_0603_1608Metric | R24, R25, R31, R32, R33, R49, R56, R59, R62, R65, R68, R71 |
| 11 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11 |
| 11 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11 |
| 10 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10 |
| 8 | 10K | Potentiometer_THT:Potentiometer_Bourns_PTA6043_Single_Slide | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8 |
| 8 | SW_Push | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 6 | 5.1K | Resistor_SMD:R_0402_1005Metric | R9, R14, R34, R38, R50, R52 |
| 3 | CD4051BM96 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1, U4, U6 |
| 3 | GZ2012D601TF | Inductor_SMD:L_0805_2012Metric | FB1, FB2, FB3 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C35, C36 |
| 2 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C5, C20 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | Conn_01x08 | Connector_JST:JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J2 |
| 1 | M24C02-WMN6TP | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | ST RESET | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW9 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U5 |
| 1 | TYPE-C 16PIN 2MD(073) | parts:USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB1 |
| 1 | X1270WVS-2X05B-6TV01 | parts:IDC-SMD_10P-P1.27_X1270WVS-2X05B-6TV01 | CN1 |
| 1 | X50328MSB2GI | parts:CRYSTAL-SMD_L5.0-W3.2 | X1 |
| 1 | XC6206P332MR-G | Package_TO_SOT_SMD:SOT-23-3 | U2 |

florolf/lab-automation
Plugs into relay and can be used to provide switchable 5V USB power to downstream devices.


stevel1212-droid/stm32-rtc-climate-controller
Kicad project of an STM32-based board climate controller utilizing an RTC module for time-scheduled environmental reading of temperature/humidity with SHT30 sensor and optional small relay for control.


FilmNeverDie/Farbung
A open source project based on FilmNeverDie's CP800 film processing machine



It measures 200 × 150 mm and has 4 copper layers, 1.6 mm thick.
190 parts, built around the CD4051BM96, M24C02-WMN6TP, SRV05-4 and XC6206P332MR-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rland93/midi8x3 repository on GitHub, at the commit this page was made from: the board is hardware/midi-controller.kicad_pcb and its schematic hardware/midi-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rland93 before reusing the design.