
ByulPCB
mpph21/Proyecto-Byul
Robot capaz de difundir información sobre primeros auxilios, además de medir diferentes parámetros vitales.

The hardware design files in this directory are licensed under CERN-OHL-P-2.0. See LICENSE.
BioSense is an open-source printed circuit board by KrystianRuszczak, from the KrystianRuszczak/BioSense repository on GitHub, published under the MIT licence. It is a 4-layer board of 85.4 × 106.8 mm with 92 parts on 73 nets, routed with 396 tracks and 40 vias.
It is built around the NODEMCU-32SLUA, SN74LV1T125DBVR-TP and 112J-TDAR-R01, with the MAX30102, MLX90614 and BQ21040DBV among its other parts. Its parts include 29 capacitors, 21 resistors, 11 connectors, 6 diodes and 6 transistors. It belongs with the ESP8266 boards of this library.
See main/include/biosense_config.hpp.
Production files for ordered revisions are stored in fabrication/revX/.
Copyright (c) 2026 Krystian Ruszczak.
The hardware design files in this directory are licensed under CERN-OHL-P-2.0. See LICENSE.
The design files are provided "as is", without warranty. The complete terms are in the license file.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C23, C24, C25, C29 +4 |
| 10 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R8, R12, R14, R15, R16, R17, R19, R20, R21 |
| 7 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5, C8, C22, C26, C27, C28 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP_3V3, TP_5V1, TP_ADC1, TP_VSYS1 |
| 4 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2, D3, D4, D5 |
| 3 | AO3401A | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q2, Q4, Q6 |
| 3 | DMN2041L | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q3, Q5 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R9 |
| 2 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D_HandSolder | C_tantal_1, C_tantal_2 |
| 2 | 330ohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R13 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | 600ohm_to_100MHz_min1A | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1, FB2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW3, SW4 |
| 2 | TestPoint | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP_GND_1, TP_GND_2 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21 |
| 1 | 112J-TDAR-R01 | 112J-TDAR-R01:112JTDARR01 | J11 |
| 1 | 150k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 2k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 470-1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 680 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | AD8232 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | AP9101CK6 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U1 |
| 1 | BPT14X BESTAR | Buzzer_Beeper:Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | BQ21040DBV | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U2 |
| 1 | C1001 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J8 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | EG1218 | EG1218:EG1218 | S1 |
| 1 | GSR | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | LTST-C191KRKT | LTST-C191KRKT:LEDC1608X55N | LED1 |
| 1 | LiPo_Battery | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | MAX30102 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | MLX90614 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | NODEMCU-32S | NODEMCU-32S:MODULE_NODEMCU-32S | U3 |
| 1 | OLED_0.96_I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | SN74LV1T125DBVR | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | IC2 |
| 1 | SS38 | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | TPS73733DCQR | TPS73733DCQR:SOT127P706X180-6N | IC1 |
| 1 | U3V16F5 POLOLU step up | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |

mpph21/Proyecto-Byul
Robot capaz de difundir información sobre primeros auxilios, además de medir diferentes parámetros vitales.

dhruv1859/CARVantaBAC
🧬 CARVanta Next-Generation Precision Oncology & AI CAR-T Cell Platform Interactive 3D Biological Digital Twin • 3D Neural Bridge • Sentinel HYDRA Biosensor

porast1/suspension-telemetry
Suspension telemetry system for mountain bike or dirt bike


Merix-Industries/CanSat-STM-PCB
A custom-designed PCB for a CanSat project, built around the STM32F405RGT microcontroller. The board integrates all essential subsystems for atmospheric data collection, positioning, and communication into a single…



ThomasStolt/LongTermEnvLogger
The aim of this project is to measure, store, display and evaluate the temperature in the rooms of a large building over an extended time period. This project has 2 main components:
It measures 85.4 × 106.8 mm and has 4 copper layers, 1.6 mm thick.
92 parts, built around the NODEMCU-32SLUA, SN74LV1T125DBVR-TP, 112J-TDAR-R01 and MAX30102. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KrystianRuszczak/BioSense repository on GitHub, at the commit this page was made from: the board is hardware/biosense_pcb/Biosense.kicad_pcb and its schematic hardware/biosense_pcb/Biosense.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).