
Blackpants
o7-machinehum/Blackpants
Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.

Linux based WiFi pentesting device for the Flipper Zero.
Nff pcb is an open-source printed circuit board by o7-machinehum, from the o7-machinehum/flipper-blackhat repository on GitHub. It is a 4-layer board of 91 × 53.1 mm with 184 parts on 322 nets, routed with 18,488 tracks and 375 vias.
It is built around the A33, CH340C and RTL8723DS-CG, with the AP3036BKTR-G1, DM3AT-SF-PEJM5 and LM66100DCK among its other parts. Its parts include 97 capacitors, 41 resistors, 15 ICs, 9 connectors and 6 inductors. It belongs with the radio and wireless and computers and single-board computers boards of this library.
The Flipper Blackhat is a Linux based Flipper addon that enables WiFi attacks. It uses an Allwinner A33, which is a quad-core SoC connected to 512MB of RAM. The board has two USB2 ports, and one USB-C, which is connected to an FTDI.

There are three main repositories for this device.
The project is licensed under the Creative Commons (4.0 International License) Attribution—Noncommercial—Share Alike license. This allows sharing and adapting material for non-commercial purposes, provided credit is given to the creator and adaptations are shared under the same terms. The material can be used in any format with necessary technical modifications, but no warranties are provided. The license prohibits imposing additional restrictions and ensures the rights are irrevocable as long as the terms are followed.
Basically... If you make boards for yourself: great, make boards for your friends: great, but please do not sell hundreds on them on Aliexpress. I'm selling boards here; the money made here goes back into this project and other similar open-source projects!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 45 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C27, C30, C31, C32, C33, C37, C38, C40, C42, C43, C100, C104 +29 |
| 12 | 22uF | Capacitor_SMD:C_0805_2012Metric | C6, C9, C10, C11, C14, C15, C16, C17, C22, C23, C24, C25 |
| 9 | 22uF | Capacitor_SMD:C_0402_1005Metric | C53, C54, C55, C56, C61, C62, C69, C70, C94 |
| 7 | 100k | Resistor_SMD:R_0402_1005Metric | R15, R23, R24, R25, R37, R41, R42 |
| 7 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R4, R5, R33, R36, R45 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C34, C49, C50, C60, C101 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP13, TP14, TP15, TP16, TP18 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R21, R22, R30, R39 |
| 4 | 10nF | Capacitor_SMD:C_0402_1005Metric | C7, C12, C18, C20 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C41, C45, C46, C47 |
| 4 | 10uF | Capacitor_SMD:C_0402_1005Metric | C29, C99, C102, C103 |
| 4 | 1uH | SNH.4020.TYB1R0MT00:SNH.4020.TYB1R0MT00 | L1, L2, L3, L4 |
| 4 | TPS62095RGTR | TI:TI_RTE_S-PWQFN-N16 | U3, U4, U5, U6 |
| 3 | 0R | Resistor_SMD:R_0402_1005Metric | R26, R35, R38 |
| 3 | NC | Capacitor_SMD:C_0402_1005Metric | C36, C39, C44 |
| 3 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1, JP3, JP4 |
| 2 | 10M | Resistor_SMD:R_0402_1005Metric | R29, R31 |
| 2 | 10k | Resistor_SMD:R_Array_Convex_4x0402 | RN1, RN2 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C95, C96 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C26, C28 |
| 2 | 22R | Resistor_SMD:R_0402_1005Metric | R27, R28 |
| 2 | 240R | Resistor_SMD:R_0402_1005Metric | R3, R6 |
| 2 | 30pF | Capacitor_SMD:C_0402_1005Metric | C97, C98 |
| 2 | 470pF | Capacitor_SMD:C_0402_1005Metric | C8, C13 |
| 2 | 5.6k | Resistor_SMD:R_0402_1005Metric | R43, R44 |
| 2 | 5nF | Capacitor_SMD:C_0402_1005Metric | C19, C21 |
| 2 | LM66100DCK | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U11, U12 |
| 2 | NUP2202 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U14, U15 |
| 2 | USB_A | Connector_USB:USB_A_Molex_105057_Vertical | J2, J3 |
| 1 | 0.22uF | Capacitor_SMD:C_0603_1608Metric | C35 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R34 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R40 |
| 1 | 110k | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 120R@100MHz | Inductor_SMD:L_0603_1608Metric | L5 |
| 1 | 120k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 150k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 160k | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R32 |
| 1 | 220k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 22uH | Inductor_SMD:L_1210_3225Metric | L6 |
| 1 | 24Mhz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | 32.768khz | Abracon:Abracon-ABS05-0-0-MFG | Y2 |
| 1 | 330k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 470k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 5R1 | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 74LVC1G08 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U13 |
| 1 | 82k | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | A33 | A33_FP:Allwinner_Technology_Co.,_Ltd.-A33-0 | U2 |
| 1 | AP131-25 | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | AP3036B | Package_TO_SOT_SMD:SOT-23-6 | U9 |
| 1 | AS4C512M16D3L-12BIN | AS4C512M16D3L:Alliance_Memory-AS4C512M16D3L-12BIN-0-0-IPC_A | U1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U10 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J4 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Horizontal | J6 |
| 1 | Conn_01x20_MountingPin | Connector_FFC-FPC:Hirose_FH12-20S-0.5SH_1x20-1MP_P0.50mm_Horizontal | J8 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_901-143_Horizontal | J7 |
| 1 | Green | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Jumper_2_Small_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J1 |
| 1 | Power Select | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | RTL8723DS | KiLib:RTL8723 | U8 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3305A | SW1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J5 |
It measures 91 × 53.1 mm and has 4 copper layers, 1.6 mm thick.
184 parts, built around the A33, CH340C, RTL8723DS-CG and AP3036BKTR-G1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the o7-machinehum/flipper-blackhat repository on GitHub, at the commit this page was made from: the board is hat/nff_pcb/hardware.kicad_pcb and its schematic hat/nff_pcb/a33_power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask o7-machinehum before reusing the design.

o7-machinehum/Blackpants
Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.

o7-machinehum/wifiwart
Linux SBC featuring two wifi radios, masquerading as a USB charger.

damjanovgit/Linux-capable-PCB
Dizajn štampane pločice i board bring-up za Linux operativni sistem.


Greentalinjo/74HController
A game controller built entirely from discrete 74HC logic - no microcontroller, a diode ROM and an 8-N-1 serial frame out of an RJ45 console port.


Cyber-Professionals-Enthusiast-Club/DC-34-Badge
CPEC Badge Kicad design files for DEFCON 34
