2 layers71.1 × 49.3 mm
2 layers71.8 × 50.4 mm
Pid smt oven
ntchris/arduino1- Size
- 71.8 × 50.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 48
- Pads
- 156
- Tracks, vias
- 283, 19
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 9 Jan 2016
- Updated
- 2 Jan 2023
Overview
Pid smt oven is an open-source printed circuit board by ntchris, from the ntchris/arduino repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 71.8 × 50.4 mm with 57 parts on 48 nets, routed with 283 tracks and 19 vias.
It is built around the MCP6002-I/P, S8050 and SS12. Its parts include 17 capacitors, 16 resistors, 7 diodes, 5 connectors and 3 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
MCP6002-I/P
PDIP-8-40℃~+85℃ 1.8V~6V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
S8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
SS12
SMA(DO-214AC)Schottky Diodeshongjiacheng
README
README.mdarduino
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 47uf | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | C1, C3, C10, C11, C15, C16, C18 |
| 6 | 100nf | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | C2, C4, C5, C6, C20, C23 |
| 4 | MountingHole | myFootPrintLibs:MountingHole_2.0mm | H1, H2, H3, H4 |
| 3 | 4.7k | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R4, R14, R15 |
| 2 | 10k | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R1, R16 |
| 2 | 1N4007 | myFootPrintLibs:D_SMA_Handsoldering | D1, D3 |
| 2 | 4k | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R5, R13 |
| 2 | S8050 | myFootPrintLibs:SOT-23_PNP_NPN | Q2, Q3 |
| 2 | zener 4.7V | myFootPrintLibs:D_MiniMELF_Handsoldering_Zener | D2, D6 |
| 1 | 180 | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R8 |
| 1 | 18k | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R6 |
| 1 | 1N4148 | myFootPrintLibs:D_MiniMELF_Handsoldering_Zener | D4 |
| 1 | 1k | myFootPrintLibs:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | R10 |
| 1 | 220uf | myFootPrintLibs:CP_EIA-7343-20_Kemet-V_Pad2.25x2.55mm_HandSolder | C17 |
| 1 | 22uf | myFootPrintLibs:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | 24 | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R11 |
| 1 | 240k | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R12 |
| 1 | 2k | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R7 |
| 1 | 3.9k | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R9 |
| 1 | 330uf | myFootPrintLibs:CP_EIA-7343-20_Kemet-V_Pad2.25x2.55mm_HandSolder | C9 |
| 1 | 40k | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R2 |
| 1 | 470uf | myFootPrintLibs:CP_Radial_D8.0mm_P3.80mm | C7 |
| 1 | 9k | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R3 |
| 1 | AOD403_pmosfet | myFootPrintLibs:TO-252-2 | Q1 |
| 1 | Arduino_Nano_v2.x | myFootPrintLibs:Arduino_Nano_order | a2 |
| 1 | Heater VH3.96_1X02 | myFootPrintLibs:JST_VH_B2P-VH-B_1x02_P3.96mm_Vertical | J2 |
| 1 | JST_2.54_1X04_LCD | myFootPrintLibs:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J4 |
| 1 | LED | myFootPrintLibs:LED_D3.0mm | D5 |
| 1 | MCP6002 | myFootPrintLibs:SO-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Max20003A_DC_BUCK_5V | myFootPrintLibs:MAX20003A_dc_buck_module | a1 |
| 1 | SS12 | myFootPrintLibs:D_SMA_Handsoldering | D7 |
| 1 | Speaker | myFootPrintLibs:Buzzer_9x4.2 | LS1 |
| 1 | Thermistor_NTC 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | TH1 |
| 1 | Thermo JST_2.54_1X02 | myFootPrintLibs:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J3 |
| 1 | VH3.96_1X02 20V Power | myFootPrintLibs:JST_VH_B2P-VH-B_1x02_P3.96mm_Vertical | J1 |
| 1 | XH2.54_1X04_RotaryEnc | myFootPrintLibs:JST_XH_1x04_P2.54mm_Vertical | J5 |
More from ntchris/arduino
7- 2 layers68.9 × 44.4 mm
- 2 layers74.1 × 50.8 mm
- 2 layers70 × 52.4 mm
- 2 layers48.9 × 49.5 mm
- 2 layers45.1 × 47 mm
- 2 layers44.8 × 47 mm
Similar boards
- 2 layers53.1 × 100.5 mm
- 2 layers102 × 52 mm
- 4 layers38.5 × 47 mm
- 8 layers153.7 × 88.9 mm
Link
oro-os/link
The Oro OS CI/CD pipeline including PCBs, CAD files, firmware and server infrastructure
381 parts14MIT - 2 layers70 × 70 mm
AirSensor display
MarcFinns/AirSensor-for-HomeAssistant
AirSensor for HomeAssistant (hardware and software)
30 parts8 - 2 layers150 × 150 mm
BoardGame
jkordek1/Man-Don-t-Get-Angry-Board-game
"Man don't get mad" - electronic board game
218 parts5 - 4 layers56 × 88 mm
Pico peltier
syauqi-alias/pico-peltier
A TEC Controller using Pico RP2350 with Analog Devices LT8722 full bridge driver rated at 15V 4A
99 parts1MIT - 4 layers68.8 × 68.6 mm
GMWM Analysis Board
thejamesrhodes/IMU-Quantisation-research-project
Research into quantisation effects in MEMS gyroscopes using custom STM32 hardware.
163 parts1MIT
Questions
How big is the Pid smt oven PCB?
It measures 71.8 × 50.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pid smt oven use?
57 parts, built around the MCP6002-I/P, S8050 and SS12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pid smt oven KiCad files?
From the ntchris/arduino repository on GitHub, at the commit this page was made from: the board is pid_smt_oven/hardware_design/ordered_2022_old/pid_smt_oven.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pid smt oven design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).