
Mintypcb
jackw01/pi-tin
Open source raspberry pi handheld retro gaming console

VolvocineWithCurrentSensor is an open-source printed circuit board by nishikawak529, from the nishikawak529/VolvocineWithCurrentSensor repository on GitHub. It is a 2-layer board of 72 × 47 mm with 26 parts on 33 nets, routed with 176 tracks and 0 vias.
It is built around the PAM2401SCADJ and SI2319CDS. Its parts include 10 resistors, 5 connectors, 3 ICs, 1 capacitor and 1 transistor. It belongs with the PIC boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R9, R11, R12 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, RFB2 |
| 2 | Conn_01x12_Socket | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J2, J6 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | Cin1 |
| 1 | 2.2uH | Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L1 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | Cout1 |
| 1 | 27k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 3.9k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 50m | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | Rshunt1 |
| 1 | 750k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RFB1 |
| 1 | INA226 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | PAM2401SCADJ | Package_SO:MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | PIC10F322-IOT | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | PWM, +5V, GND | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | ServoMotor1 |
| 1 | Sensors | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | Si2319CDS | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Switch | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J4 |
| 1 | battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J5 |

jackw01/pi-tin
Open source raspberry pi handheld retro gaming console

SophBG/pi-tin-mod
Personal build of jackw01's Pi Tin (3D-printed clamshell version, KiCad 10). It adds 10 RGB LEDs under the buttons, a centred speaker, a USB-drive mode for the ROMs, and ESD protection on USB, and runs on an Orange Pi…





BelaPlatform/gliss-hardware
You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0.

It measures 72 × 47 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the PAM2401SCADJ and SI2319CDS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nishikawak529/VolvocineWithCurrentSensor repository on GitHub, at the commit this page was made from: the board is VolvocineWithCurrentSensor.kicad_pcb and its schematic VolvocineWithCurrentSensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nishikawak529 before reusing the design.