2 layers17.6 × 83.6 mm
Gliss led
BelaPlatform/gliss-hardware
You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0.
57 parts18
4 layers19 × 111.1 mm
Gliss main
BelaPlatform/gliss-hardware18You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0.
- Size
- 19 × 111.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 107
- Nets
- 101
- Pads
- 372
- Tracks, vias
- 1,062, 94
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Oct 2023
- Updated
- 28 Oct 2023
Overview
Gliss main is an open-source printed circuit board by BelaPlatform, from the BelaPlatform/gliss-hardware repository on GitHub. It is a 4-layer board of 19 × 111.1 mm with 107 parts on 101 nets, routed with 1,062 tracks and 94 vias.
It is built around the STM32G491KEU6, R-78E5.0-0.5 and ST1S06APUR, with the LM4040D10IDBZT, MIC5317-3.3YM5-TR and BAT54S among its other parts. Its parts include 34 resistors, 31 capacitors, 13 connectors, 7 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Main components
10
STM32G491KEU6
UFQFPN-32(5x5)-40℃~+85℃ 1.71V~3.6V 12bit 12bit 170MHz 26 32 Bit 512KB ARM Cortex-M4F Built-in FLASH UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
R-78E5.0-0.5
SIP,11.5x7.6mm-300mA、500mA -5V、5V 1 330uF、680uF 6.5V~36V、7V~31V 81%、90% Buck Short Circuit Protection SIP,11.5x7.6mm DC-DC Power Modules ROHSYLPTECDC-DC Power Modules
ST1S06APUR
DFN-6(3x3)-30℃~+85℃@(TJ) 1 1.5A 1.5MHz 2.7V~6V 800mV~5.22V Buck Buck Built-in Yes DFN-6(3x3) DC-DC Converters ROHSSTMicroelectronicsDC-DC Converters
LM4040D10IDBZT
SOT-23-3-40℃~+85℃@(Ta) 10V 150ppm/℃ 15mA 180uVrms Fixed Parallel ±1% SOT-23-3 Voltage Reference ROHSTexas InstrumentsVoltage Reference
MIC5317-3.3YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 200uVrms 29uA 3.3V 310mV@(150mA) 6V 80dB@(1kHz) Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky DiodesBSH202
SOT-23-55℃~+150℃ 1 P-Channel 1.9V 2.9nC@10V 27pF 30V 417mW 520mA 80pF 900mΩ@10V 9pF P-Channel ±20V SOT-23 MOSFETs ROHSNexperiaMOSFETsBSS123
SOT-23-55℃~+150℃ 1 N-channel 1.4V 1.4nC@10V 100V 170mA 22pF 2pF 3.5pF 680mW 6Ω@10V、10Ω@4.5V N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
ECS-.327-12.5-16-TR
SMD1610-2P-40℃~+85℃ 12.5pF 32.768kHz 90kΩ ±20ppm SMD1610-2P Crystals ROHSECSCrystalsSI2319CDS
SOT-23-55℃~+150℃ 1 P-Channel 108mΩ@4.5V 2.5V 2.5W 21nC@10V 4.4A 40V 595pF 61pF 76pF P-Channel SOT-23 MOSFETs ROHSVishay IntertechnologyMOSFETs
README
README.mdgliss-hardware
You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0. The firmware can be found in the repository https://github.com/BelaPlatform/gliss-firmware
Parts
107| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C6, C15, C16, C18, C21, C45 |
| 6 | 0 | Resistor_SMD:R_0402_1005Metric | R3, R6, R7, R9, R29, R37 |
| 3 | 220 | Resistor_SMD:R_0402_1005Metric | R21, R34, R35 |
| 3 | AudioJack2_SwitchT | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1, J2, J3 |
| 3 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8, J10, J11 |
| 3 | D.N.P. | Capacitor_SMD:C_0402_1005Metric | C28, C29, C30 |
| 3 | FerriteBead | Inductor_SMD:L_0402_1005Metric | FB1, FB2, FB3 |
| 2 | 100, 0.1% | Resistor_SMD:R_0402_1005Metric | R18, R19 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 100pF | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | 124k, 0.1% | Resistor_SMD:R_0402_1005Metric | R10, R12 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C24, C25 |
| 2 | 20k | Resistor_SMD:R_0402_1005Metric | R32, R33 |
| 2 | 27k, 0.1% | Resistor_SMD:R_0402_1005Metric | R11, R13 |
| 2 | 4.3pF | Capacitor_SMD:C_0402_1005Metric | C13, C17 |
| 2 | 4k7 | Resistor_SMD:R_0402_1005Metric | R26, R27 |
| 2 | 5k6 | Resistor_SMD:R_0402_1005Metric | R24, R25 |
| 2 | Conn_01x16_Female | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J6, J7 |
| 2 | Conn_02x02_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x02_P1.27mm_Vertical | J4, J16 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R30 |
| 1 | 100k, 0.1% | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 127k, 0.1% | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 127k, 0.1% | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 12uH | Inductor_SMD:L_1210_3225Metric | L3 |
| 1 | 18k | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 20k, 0.1% | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 22 | Resistor_SMD:R_0402_1005Metric | R28 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C22 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C23 |
| 1 | 2k2 | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 2u2 | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 2u2 [DNP] | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C46 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C27 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 470R | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 47n | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C20 |
| 1 | 96k, 0.1% | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | BAT60J | Diode_SMD:D_SOD-323 | D2 |
| 1 | BSH202 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | BSS123 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | CY8C206X6A | Gliss:QFN48-LEADS | U30 |
| 1 | Conn_01x04 [DNP] | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J21 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J15 |
| 1 | D.N.P | Resistor_SMD:R_0402_1005Metric | R31 |
| 1 | ECS-.327-12.5-16-TR | Gliss:XTAL_ECS-.327-12.5-16-TR | Y1 |
| 1 | EURO_PWR_2x5 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | G*** | kibuzzard-63924626 | kibuzzard-63924626 |
| 1 | G*** | kibuzzard-6392472E | kibuzzard-6392472E |
| 1 | G*** | kibuzzard-63924611 | kibuzzard-63924611 |
| 1 | G*** | kibuzzard-6392461D | kibuzzard-6392461D |
| 1 | G*** | kibuzzard-639244A3 | kibuzzard-639244A3 |
| 1 | G*** | kibuzzard-639247C2 | kibuzzard-639247C2 |
| 1 | G*** | kibuzzard-6392462F | kibuzzard-6392462F |
| 1 | HIGHLY_PB6149L-13 | Gliss:HIGHLY_PB6149L_v5 | SW1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LM4040D10IDBZT | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | MIC5317-3.3YM5 | Package_TO_SOT_SMD:TSOT-23-5 | U6 |
| 1 | R-78E5.0-0.5 | Gliss:R-78-xxx-0.5 | U2 |
| 1 | ST1S06APUR | Package_DFN_QFN:DFN-6-1EP_3x3mm_P0.95mm_EP1.7x2.6mm | U4 |
| 1 | STM32G491KEU6 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U5 |
| 1 | Si2319CDS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | TL074 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U3 |
| 1 | Val** | Gliss:gliss_edge_silkscreen_user_graphics | outline |
More from BelaPlatform/gliss-hardware
4- 2 layers44.4 × 121.9 mm
Gliss faceplate 1U L
BelaPlatform/gliss-hardware
You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0.
23 parts18 - 2 layers20 × 128.5 mm
Gliss faceplate inverted
BelaPlatform/gliss-hardware
You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0.
23 parts18 - 2 layers20 × 128.5 mm
Gliss faceplate
BelaPlatform/gliss-hardware
You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0.
23 parts18
Similar boards
- 2 layers105 × 56 mm
LCD FPGA
aeberbach/ReAnalog
Replacing the PSU, CRT and analog board in Macintosh SE and SE/30
68 parts1 - 2 layers152.4 × 63.5 mm
NixieClock MainBoard
JakobThiessen/NixieClock
Wichtig: Ohne Änderung tut die SD karte nicht. (Betrifft nur V2.0 in der V2.1 sind die Änderung im Layout schon umgesetzt)
111 parts - 2 layers80 × 60 mm
Tramuntana lite r1a
controlpaths/tramuntana
AI-first open hardware tool for debugging embedded systems: SPI/I2C/UART, scope, logic analyzer, with MCP server for AI agents
36 parts2 - 4 layers58.4 × 101.9 mm
Up5k osc
emeb/up5k_osc
The brute-force approach is to synthesize these analog waveforms at sufficiently high sample rates that the timing jitter becomes imperceptible.
137 parts36MIT - 2 layers100 × 100 mm
- 2 layers100 × 100 mm
COPIE 0
AssaadMH/shadow-4wd-motor-shield-pcb
The 24-signal interface board that replaces SHADOW's perfboard wiring — and the two pin conflicts that only appeared on re-checking the spec.
154 parts2MIT - 2 layers119.4 × 109.2 mm
- 2 layers200 × 115 mm
Musicbrain busboard v2
MarkWestbroek/MusicBrain
A central brain running on teensy or a lighter MCU to process any control signals (MIDI, CV, our own) into the same but adding logic, ADSRs, DCOs, CV matrices etc. to it
94 partsMIT
Questions
How big is the Gliss main PCB?
It measures 19 × 111.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Gliss main use?
107 parts, built around the STM32G491KEU6, R-78E5.0-0.5, ST1S06APUR and LM4040D10IDBZT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gliss main KiCad files?
From the BelaPlatform/gliss-hardware repository on GitHub, at the commit this page was made from: the board is gliss_main/gliss_main.kicad_pcb and its schematic gliss_faceplate/gliss_faceplate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gliss main design in my own project?
Its repository states no licence, so its author keeps all rights: ask BelaPlatform before reusing the design.