4 layers65 × 46.2 mm
4 layers98.1 × 94.4 mm
Ikafly rev0a p
akionu/ikafly- Size
- 98.1 × 94.4 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 368
- Nets
- 148
- Pads
- 1,234
- Tracks, vias
- 2,270, 816
- Pours
- 22
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Mar 2024
- Updated
- 6 Dec 2024
Overview
Ikafly rev0a p is an open-source printed circuit board by akionu, from the akionu/ikafly repository on GitHub. It is a 4-layer board of 98.1 × 94.4 mm with 368 parts on 148 nets, routed with 2,270 tracks and 816 vias.
It is built around the CH32V003J4M6, RP2040 and AT2659, with the ATGM336H-5N31, DRV8837DSG and SPL06-001 among its other parts. Its parts include 120 capacitors, 83 resistors, 37 ICs, 22 diodes and 21 connectors. It belongs with the RP2040 and RISC-V boards of this library.
Main components
12
CH32V003J4M6
SOP-8SOP-8 Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
AT2659
DFN-6(1x1.6)-14dBm -5dBm 0.8dB 1.4V~3.6V 1.55GHz~1.615GHz 15dB 15dB 21.5dB 4.3mA 输出匹配集成、快速使能控制、低功耗模式、ESD保护 DFN-6(1x1.6) Low Noise Amplifiers (LNA) - RF ROHSZHONGKEWEILow Noise Amplifiers (LNA) - RF
ATGM336H-5N31
SMD,10.1x9.7mm-148dBm -40℃~+85℃ 2.5m 2.7V~3.6V 25mA@3.3V 35s GPS、BDS UART、I2C SMD,10.1x9.7mm GNSS Modules ROHS杭州中科微GNSS Modules
DRV8837DSG
WSON-8-EP(2x2)-40℃~+85℃ 1.8V~7V 1.9A 120nA 280mΩ Yes WSON-8-EP(2x2) Brushed DC Motor Drivers ROHSTexas InstrumentsBrushed DC Motor Drivers
SPL06-001
LGA-8(2x2.5)-40℃~+85℃ 0.06hpa 0.5pa/K 1.7V~3.6V 1hpa 1uA 28ms 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSGoertekPressure Sensors
W25Q32JVZPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 133MHz 2.7V~3.6V 20 Years 32Mbit 3ms SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbondNOR FLASH
PAM2401SCADJ
MSOP-8-40℃~+85℃ 1 150uA 1A 1MHz 2.5V~5V 900mV~4.75V Adjustable Boost Boost Built-in Yes MSOP-8 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
ME6211C33M5G-N
SOT-23-5-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LSM6DS3TR-C
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 3uA 4KB IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳 LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometersME6211C12M5G-N
SOT-23-5-40℃~+150℃ 1 1.2V 280mV@(100mA)、500mV@(200mA) 300mA 30uA 50uVrms 6V 70dB@(1kHz) Fixed Over Current Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsME6211C28M5G-N
SOT-23-5-40℃~+85℃@(Ta) 1 2.8V 220mV@(200mA) 450mA 50uVrms 55uA 6V 70dB@(1kHz) Enable Fixed Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
368| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | 100n | Capacitor_SMD:C_0402_1005Metric | C10, C10, C11, C11, C12, C12, C14, C14, C15, C15, C20, C20, C21, C21, C22, C22 +26 |
| 33 | 10k | Resistor_SMD:R_0402_1005Metric | R14, R14, R15, R15, R16, R16, R19, R19, R22, R22, R22, R23, R23, R23, R24, R24 +17 |
| 24 | 22u | Capacitor_SMD:C_0603_1608Metric | C40, C40, C41, C41, C42, C42, C43, C43, C44, C44, C45, C45, C46, C46, C47, C47 +8 |
| 22 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H1, H2, H2, H3, H3, H4, H4, H5, H5, H5, H6, H6, H6, H10, H10 +6 |
| 18 | 10u | Capacitor_SMD:C_0603_1608Metric | C16, C16, C17, C17, C18, C18, C19, C19, C34, C34, C34, C36, C36, C36, C38, C38 +2 |
| 16 | 20p | Capacitor_SMD:C_0402_1005Metric | C1, C1, C2, C2, C24, C24, C25, C25, C27, C27, C35, C35, C35, C37, C37, C37 |
| 12 | CUS10S30 | Diode_SMD:D_SOD-323 | D3, D3, D3, D4, D4, D4, D7, D7, D8, D8, D9, D9 |
| 10 | 100k | Resistor_SMD:R_0402_1005Metric | R18, R18, R25, R25, R25, R26, R26, R26, R27, R27 |
| 10 | LED | LED_SMD:LED_0603_1608Metric | D1, D1, D2, D2, D5, D5, D5, D6, D6, D6 |
| 9 | 1k | Resistor_SMD:R_0402_1005Metric | R3, R3, R4, R4, R17, R17, R21, R21, R21 |
| 8 | 2.2k | Resistor_SMD:R_0402_1005Metric | R8, R8, R9, R9, R10, R10, R11, R11 |
| 6 | 1.5uH | Inductor_SMD:L_Sunlord_SWPA3015S | L6, L6, L7, L7, L8, L8 |
| 6 | 150k | Resistor_SMD:R_0402_1005Metric | R30, R30, R33, R33, R36, R36 |
| 6 | 680k | Resistor_SMD:R_0402_1005Metric | R29, R29, R32, R32, R35, R35 |
| 6 | PAM2401SCADJ | SamacSys_Parts:SOP65P490X110-8N | PS1, PS1, PS2, PS2, PS3, PS3 |
| 5 | ANT_315MHz | Connector_Pin:Pin_D1.0mm_L10.0mm | AE2, AE2, AE3, AE3, AE3 |
| 4 | 1u | Capacitor_SMD:C_0402_1005Metric | C3, C3, C6, C6 |
| 4 | 27 | Resistor_SMD:R_0402_1005Metric | R1, R1, R2, R2 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R12, R12, R13, R13 |
| 4 | CJ2301-ES | Package_TO_SOT_SMD:SOT-23 | Q2, Q2, Q3, Q3 |
| 4 | DRV8837 | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | IC16, IC16, IC17, IC17 |
| 4 | GPS2MCU | Ikafly_lib:GPS2MCU_Conn | J3, J3, J5, J5 |
| 4 | Motor_Conn | Ikafly_lib:JST_ZH_2_Side | J1, J1, J2, J2 |
| 4 | TS-1187A-B-A-B | SamacSys_Parts:TS1187ABAB | S1, S1, S2, S2 |
| 3 | , , | ||
| 3 | 0.47u | Capacitor_SMD:C_0402_1005Metric | C33, C33, C33 |
| 3 | 1 | Resistor_SMD:R_2512_6332Metric | R20, R20, R20 |
| 3 | 1.5p | Capacitor_SMD:C_0402_1005Metric | C31, C31, C31 |
| 3 | 39nH | Inductor_SMD:L_0402_1005Metric | L4, L4, L4 |
| 3 | 40F | Ikafly_lib:Capacitor_P3.5_8x20_H | C29, C29, C29 |
| 3 | 6.8p | Capacitor_SMD:C_0402_1005Metric | C30, C30, C30 |
| 3 | 68nH | Inductor_SMD:L_0402_1005Metric | L5, L5, L5 |
| 3 | 9.81563MHz | Crystal:Crystal_C38-LF_D3.0mm_L8.0mm_Horizontal | Y3, Y3, Y3 |
| 3 | CH32V003J4M6 | SamacSys_Parts:SOIC127P600X155-8N | IC12, IC12, IC12 |
| 3 | Charge | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J7, J7, J7 |
| 3 | ME6211C33M5G-N | SamacSys_Parts:SOT95P282X145-5N | IC14, IC14, IC14 |
| 3 | Nichrome | Ikafly_lib:TerminalBlock_TB111-2-2-U-1-1 | J8, J8, J8 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP1, TP1 |
| 3 | WF490RE | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | IC13, IC13, IC13 |
| 3 | Write | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9, J9, J9 |
| 3 | YJL3416A | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1 |
| 2 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C26, C26 |
| 2 | 3.3uH | Inductor_SMD:L_0603_1608Metric | L3, L3 |
| 2 | 33nH | Inductor_SMD:L_0402_1005Metric | L2, L2 |
| 2 | 470p | Capacitor_SMD:C_0402_1005Metric | C13, C13 |
| 2 | 6.8nH | Inductor_SMD:L_0402_1005Metric | L1, L1 |
| 2 | 9.844MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2, Y2 |
| 2 | AA_Cell | Ikafly_lib:Conn_MY-AA | BT1, BT1 |
| 2 | ANT_GNSS | Ikafly_lib:BWGNSCNX18-18W2 | AE1, AE1 |
| 2 | AT2659 | Ikafly_lib:AT2659 | IC18, IC18 |
| 2 | ATGM336H-5N31 | SamacSys_Parts:ATGM336H5N31 | IC5, IC5 |
| 2 | CR2032 | Ikafly_lib:MY-2032-08-J-Fe | BT2, BT2 |
| 2 | Crystal_12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1, Y1 |
| 2 | LIS3MDLTR | Package_LGA:LGA-12_2x2mm_P0.5mm | IC9, IC9 |
| 2 | LSM6DS3TR-C | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | IC8, IC8 |
| 2 | ME6211C12M5G-N | SamacSys_Parts:SOT95P282X145-5N | IC7, IC7 |
| 2 | ME6211C28M5G-N | SamacSys_Parts:SOT95P282X145-5N | IC6, IC6 |
| 2 | MST22D18G2_125 | SamacSys_Parts:MST22D18G2125 | S3, S3 |
| 2 | OV2640_FPC_P0.5_24P | Ikafly_lib:FC05-SXXDCU-00 | J6, J6 |
| 2 | Polyfuse | Fuse:Fuse_0603_1608Metric | F1, F1 |
| 2 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | IC2, IC2 |
| 2 | SPL06-001 | Ikafly_lib:Goertek_SPL06-001 | IC10, IC10 |
| 2 | USB_type_C | Ikafly_lib:USB_type_C | J4, J4 |
| 2 | W25Q32JVZPIQ | SamacSys_Parts:SON127P600X500X80-9N-D | IC1, IC1 |
| 2 | WF4455TD | Package_TO_SOT_SMD:SOT-23-6 | IC11, IC11 |
| 2 | XC6206P182MR | Package_TO_SOT_SMD:SOT-23-3 | IC15, IC15 |
| 2 | ZD24C512A | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.5mm | IC3, IC3 |
More from akionu/ikafly
2- 4 layers25 × 25 mm
Similar boards
- 4 layers45.7 × 30.5 mm
GPS Carrier
neatstranger/pal-collar
Pal collar will use a Lora-Wan base station, and your internet connection to receive the location from your pet within 1 Mile of your home.
10 parts - 2 layers99.3 × 61.8 mm
- 6 layers68.8 × 74.6 mm
FurbyBoard
Guilleloma/Furby-GPT
This project transforms a 1998 Furby into an interactive and advanced desktop assistant using a Raspberry Pi W. It incorporates OpenAI and Whisper for natural language processing, primarily relying on Google Cloud Text…
158 parts26 - 4 layers63.8 × 50.8 mm
V2 reference
ameesme/little-camera
A small black-and-white camera that posts to its own tiny blog, and everything around it.
85 partsMIT - 4 layers80 × 40 mm
Iris cortex
HeyPCB/iris-cortex
Iris Cortex: head controller of the Iris robot head. ESP32-S3 (16 MB flash, 8 MB PSRAM), OV2640 eye-camera FPC, iris-ring LED drivers, harness hub.
77 partsCERN-OHL-S-2.0 - 4 layers32 × 46 mm
Falcon core
PHS-SMCS/falcon-core
Lightest ESP32-based blimp controller with the works; 9-DoF, ToF altimetry, motor drivers, and Wi-Fi enabled camera streaming, all on a single 300mAh LiPo. >1hr of battery life.
94 partsAGPL-3.0 - 2 layers19.4 × 32.5 mm
GpsBreakout
crnicholson/StratoSoar-MK3
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone
18 parts43 - 2 layers69.8 × 40.4 mm
T Piece Kicad
calebmarting/os2026-badge
Schematics and firmware for the Open Sauce 2026 Badge and SAOs
82 parts23MIT
Questions
How big is the Ikafly rev0a p PCB?
It measures 98.1 × 94.4 mm and has 4 copper layers, 1 mm thick.
What parts does the Ikafly rev0a p use?
368 parts, built around the CH32V003J4M6, RP2040, AT2659 and ATGM336H-5N31. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ikafly rev0a p KiCad files?
From the akionu/ikafly repository on GitHub, at the commit this page was made from: the board is elec/ikafly_main/panelized/rev0a/ikafly_rev0a_p.kicad_pcb and its schematic elec/camera_exp/camera_exp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ikafly rev0a p design in my own project?
Its repository states no licence, so its author keeps all rights: ask akionu before reusing the design.