Skip to the content
9

DRV8837DSG

Texas InstrumentsExtended

-40℃~+85℃ 1.8V~7V 1.9A 120nA 280mΩ Yes WSON-8-EP(2x2) Brushed DC Motor Drivers ROHS

Part id
ti/DRV8837DSG
Category
Brushed DC Motor Drivers
Package
WSON-8-EP(2x2)
Pins
9
In stock
71,983 at JLCPCB (C39159)
Used on
49 open-source boards

Overview

The DRV8837DSG is a brushed DC Motor Driver made by Texas Instruments in a WSON-8-EP(2x2) package with 9 pins. -40℃~+85℃ 1.8V~7V 1.9A 120nA 280mΩ Yes WSON-8-EP(2x2) Brushed DC Motor Drivers ROHS.

PCBKit's library has its KiCad symbol (Driver_Motor:DRV8837, from KiCad's library) and its footprint (Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm, from KiCad's library), ready for a KiCad board. 71,983 are in stock at JLCPCB (part C39159). 49 open-source boards in 43 repositories on GitHub use it.

Symbol

1VM2OUT13OUT24GND5IN26IN17SLEEP8VCC
Driver_Motor:DRV8837From KiCad's library

Footprint

9
Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mmFrom KiCad's library

From the datasheet

15
Supply, most
11 V · VM, recommended operating max · p. 6
Supply, least
1.8 V · VCC, recommended operating min · p. 6
Supply, most
7 V · VCC, recommended operating max · p. 6
Supply, absolute maximum
12 V · VM, absolute max · p. 6
Supply, absolute maximum
7 V · VCC, absolute max · p. 6
Works from
-40 °C · Operating ambient temperature min · p. 6
Works up to
85 °C · Operating ambient temperature max · p. 6
Junction, hottest
150 °C · Operating virtual junction temperature absolute max · p. 6
Takes working
1.5 mA · sum of VM and VCC typical operating currents, 5 V and 3 V, 50 kHz PWM · p. 8
Takes at most
3 mA · sum of VM and VCC max operating currents, 5 V and 3 V, 50 kHz PWM · p. 8
Takes asleep
35 nA · sum of VM and VCC typical sleep currents, 5 V and 3 V, nSLEEP = 0 · p. 8
Current limit
1.9 A · Overcurrent protection trip level min · p. 8
Junction to air (DSG (WSON))
60.9 K/W · Junction-to-ambient thermal resistance · p. 6
Junction to board (DSG (WSON))
32.2 K/W · Junction-to-board thermal resistance · p. 6
Junction to case (DSG (WSON))
71.4 K/W · Junction-to-case (top) thermal resistance · p. 6

What it is and has

7
Motor driver
H-bridge · p. 1
Input interface
PWM, IN1 and IN2 · p. 1
Maximum drive current
1.8 A · p. 1
Package
8-pin WSON with thermal pad · p. 1
Protection
VCC undervoltage lockout · p. 1
Protection
Overcurrent protection · p. 1
Protection
Thermal shutdown · p. 1

Around it

2
cap 0.1-µF
between VCC and GND; Ceramic, rated for VCC; place as close to VCC as possible. · p. 4
cap 0.1-µF
between VM and GND; Ceramic, rated for VM; place as close to VM as possible. · p. 4

Specifications

38
ParameterConditionsAs printedPage
Motor power-supply voltage VMOver operating ambient temperature rangemin -0.3 · max 12 V6
Logic power-supply voltage VCCOver operating ambient temperature rangemin -0.3 · max 7 V6
Control pin voltageIN1, IN2, nSLEEP; over operating ambient temperature rangemin -0.5 · max 7 V6
Operating virtual junction temperature TJmin -40 · max 150 °C6
Storage temperature Tstgmin -60 · max 150 °C6
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±3000 Vmax 3000 V6
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101; ±1500 Vmax 1500 V6
Motor power supply voltage VMOver operating ambient temperature rangemin 0 · max 11 V6
Logic power supply voltage VCCOver operating ambient temperature rangemin 1.8 · max 7 V6
Motor peak current IOUTPower dissipation and thermal limits must be observedmin 0 · max 1.8 A6
Externally applied PWM frequency fPWMmin 0 · max 250 kHz6
Logic level input voltage VLOGICmin 0 · max 5.5 V6
Operating ambient temperature TAmin -40 · max 85 °C6
Junction-to-ambient thermal resistance RθJADSG (WSON), 8 pinstyp 60.9 °C/W6
Junction-to-case (top) thermal resistance RθJC(top)DSG (WSON), 8 pinstyp 71.4 °C/W6
Junction-to-board thermal resistance RθJBDSG (WSON), 8 pinstyp 32.2 °C/W6
Junction-to-top characterization parameter ψJTDSG (WSON), 8 pinstyp 1.6 °C/W6
Junction-to-board characterization parameter ψJBDSG (WSON), 8 pinstyp 32.8 °C/W6
Junction-to-case (bottom) thermal resistance RθJC(bot)DSG (WSON), 8 pinstyp 9.8 °C/W7
VM operating voltage VMTA = 25°C, over recommended operating conditionsmin 0 · max 11 V8
VM operating supply current IVMVM = 5 V; VCC = 3 V; No PWM; TA = 25°Ctyp 40 · max 100 uA8
VM operating supply current IVMVM = 5 V; VCC = 3 V; 50 kHz PWM; TA = 25°Ctyp 0.8 · max 1.5 mA8
VM sleep mode supply current IVMQVM = 5 V; VCC = 3 V; nSLEEP = 0; TA = 25°Ctyp 30 · max 95 nA8
VCC operating voltage VCCTA = 25°C, over recommended operating conditionsmin 1.8 · max 7 V8
VCC operating supply current IVCCVM = 5 V; VCC = 3 V; No PWM; TA = 25°Ctyp 300 · max 500 uA8
VCC operating supply current IVCCVM = 5 V; VCC = 3 V; 50 kHz PWM; TA = 25°Ctyp 0.7 · max 1.5 mA8
VCC sleep mode supply current IVCCQVM = 5 V; VCC = 3 V; nSLEEP = 0; TA = 25°Ctyp 5 · max 25 nA8
Input logic low current IILVIN = 0 V; TA = 25°Cmin -5 · max 5 uA8
Input logic high current IIHVIN = 3.3 V; TA = 25°C; DRV8837max 50 uA8
Pulldown resistance RPDTA = 25°C; DRV8837typ 100 kΩ8
HS + LS FET on-resistance rDS(on)VM = 5 V; VCC = 3 V; IO = 800 mA; TJ = 25°Ctyp 280 · max 330 mΩ8
Off-state leakage current IOFFVOUT = 0 V; TA = 25°Cmin -200 · max 200 nA8
VCC undervoltage lockout VUVLOVCC falling; TA = 25°Cmax 1.7 V8
VCC undervoltage lockout VUVLOVCC rising; TA = 25°Cmax 1.8 V8
Overcurrent protection trip level IOCPTA = 25°C, over recommended operating conditionsmin 1.9 · max 3.5 A8
Overcurrent deglitch time tDEGTA = 25°C, over recommended operating conditionstyp 1 us8
Overcurrent retry time tRETRYTA = 25°C, over recommended operating conditionstyp 1 ms8
Thermal shutdown temperature TTSDDie temperature TJmin 150 · typ 160 · max 180 °C8

Pins, by the datasheet

8
1 VM
Motor power supply; bypass to GND with a 0.1-uF ceramic capacitor rated for VM. · p. 4
2 OUT1
Motor output; connect to the motor winding. · p. 4
3 OUT2
Motor output; connect to the motor winding. · p. 4
4 GND
Device ground; must be connected to ground. · p. 4
5 IN2
IN2 input. · p. 4
6 IN1
IN1 input. · p. 4
7 nSLEEP
Sleep mode input with internal pulldown; logic low enters sleep mode and logic high enables normal operation. · p. 4
8 VCC
Logic power supply; bypass to GND with a 0.1-uF ceramic capacitor rated for VCC. · p. 4

Ordering codes, by the datasheet

4
DRV8837DSGR
WSON (DSG) | 8 · 3000 units, LARGE T&R; operating temperature -40 to 85 °C · p. 22
DRV8837DSGR.B
WSON (DSG) | 8 · 3000 units, LARGE T&R; operating temperature -40 to 85 °C · p. 22
DRV8837DSGRG4
WSON (DSG) | 8 · 3000 units, LARGE T&R; operating temperature -40 to 85 °C · p. 22
DRV8837DSGRG4.B
WSON (DSG) | 8 · 3000 units, LARGE T&R; operating temperature -40 to 85 °C · p. 22

Open-source boards using it

49See all 49
  • 2 layers51.5 × 89 mmMobo, the printed circuit board in 3D

    Mobo

    opulo-inc/feeder

    Source for LumenPnP Feeders

    74 parts202
  • 2 layers85 × 17 mm3dsimo kit, the printed circuit board in 3D

    3dsimo kit

    3dsimo/3dsimo_kit

    Visit us at 3D simo pages for more information

    44 parts78
  • 2 layers116.5 × 60.3 mmTalDoor, the printed circuit board in 3D

    TalDoor

    akaStanley/TalDoor

    GatekeeperV2- POE powered NFC Door lock system using the PocketBeagle

    67 parts14GPL-3.0
  • 4 layers35 × 44.6 mmSprite, the printed circuit board in 3D

    Sprite

    space-technologies-at-california/PCBSat

    PCB Satellite Repository

    73 parts9
  • 4 layers358 × 40 mmLongboi, the printed circuit board in 3D

    Longboi

    KungfuPancake/longboi

    Possibly the longest controller board to control the BoxTurtle AFC

    297 parts7Apache-2.0
  • 4 layers99.1 × 99.1 mmMaslab, the printed circuit board in 3D

    Maslab

    maslab-5/maslab

    MIT Mobile Autonomous Systems Laboratory Robot

    324 parts4
  • 2 layers40 × 40 mmNeoBoard, the printed circuit board in 3D

    NeoBoard

    alvaroferran/NeoBoard

    Robotics controller shield for the NanoPi Neo Air with two DC motor drivers and a LiPo battery charger

    73 parts3

Parts like it

6

Questions

Is there a KiCad symbol and footprint for the DRV8837DSG?

Yes. The symbol is Driver_Motor:DRV8837 and the footprint Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DRV8837DSG?

WSON-8-EP(2x2), with 9 pins. Its footprint is drawn on this page.

Where is the DRV8837DSG datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the DRV8837DSG?

JLCPCB lists it as part C39159, with 71,983 in stock; the sellers' links on this page open their listings.

What can replace the DRV8837DSG?

Parts like it in the library: the DRV8837CDSG by Texas Instruments, the DRV8231ADSG by Texas Instruments, the DRV8220DSG by Texas Instruments and the DRV8837DSGR-TP by TECH PUBLIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DRV8837DSG?

49 boards in 43 repositories on GitHub; the most starred are listed on this page, with their KiCad files.