Skip to the content
9

DRV8220DSG

Texas InstrumentsExtended

WSON-8(2x2) Brushed DC Motor Drivers ROHS

Part id
ti/DRV8220DSG
Category
Brushed DC Motor Drivers
Package
WSON-8(2x2)
Pins
9
In stock
3,008 at JLCPCB (C3681269)
Used on
8 open-source boards

Overview

The DRV8220DSG is a brushed DC Motor Driver made by Texas Instruments in a WSON-8(2x2) package with 9 pins. WSON-8(2x2) Brushed DC Motor Drivers ROHS.

PCBKit's library has its KiCad symbol (Driver_Motor:DRV8220DSG, from KiCad's library) and its footprint (Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm, from KiCad's library), ready for a KiCad board. 3,008 are in stock at JLCPCB (part C3681269). 8 open-source boards in 6 repositories on GitHub use it.

Symbol

1VM2OUT13OUT24GND5IN2/EN6IN1/PH7MODE8SLEEP
Driver_Motor:DRV8220DSGFrom KiCad's library

Footprint

9
Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mmFrom KiCad's library

From the datasheet

13
Supply, least
4.5 V · VM, recommended operating min · p. 5
Supply, most
18 V · VM, recommended operating max · p. 5
Supply, absolute maximum
20 V · VM, absolute max · p. 5
Works from
-40 °C · Operating ambient temperature min · p. 5
Works up to
125 °C · Operating ambient temperature max · p. 5
Junction, hottest
150 °C · Operating junction temperature max · p. 5
Takes working
1.5 mA · VM active mode typical, IN1 = 0 V, IN2 = 3.3 V · p. 6
Takes at most
2 mA · VM active mode max, IN1 = 0 V, IN2 = 3.3 V · p. 6
Takes asleep
960 nA · VM sleep mode max, VVM = 12 V, TJ = 27°C · p. 6
Junction to air (DSG (WSON))
94.7 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to case (DSG (WSON))
115.1 K/W · Junction-to-case (top) thermal resistance · p. 5
Junction to board (DSG (WSON))
62.3 K/W · Junction-to-board thermal resistance · p. 5
Edge
150 ns · Output rise time typical, 10% to 90% of VVM · p. 6

What it is and has

13
Driver
N-channel H-bridge motor driver · p. 1
MOSFET on-resistance
HS + LS 1 Ω · p. 1
Motor drive
One bidirectional brushed DC motor · p. 1
Motor drive
Two unidirectional brushed DC motors · p. 1
Relay drive
One single- or dual-coil latching relay · p. 1
Peak full-bridge output current
1.76 A · p. 1
Peak half-bridge output current
1.76 A per output · p. 1
Peak parallel half-bridge output current
3.52 A · p. 1
Logic inputs
1.8 V, 3.3 V, and 5 V · p. 1
Protection
Undervoltage lockout (UVLO) · p. 1
Protection
Overcurrent protection (OCP) · p. 1
Protection
Thermal shutdown (TSD) · p. 1
Package
WSON (8), 2.00 mm × 2.00 mm · p. 1

Around it

1
cap 0.1-µF
between VM and GND; CVM1; low ESR ceramic capacitor, VM-rated. · p. 10

Specifications

48
ParameterConditionsAs printedPage
Power supply pin voltageVMmin -0.5 · max 20 V5
Power supply transient voltage rampVMmin 0 · max 2 V/us5
Logic pin voltageINx, nSLEEP, IN1/PH, IN2/ENmin -0.5 · max 5.75 V5
Tri-level pin voltageMODEmin -0.5 · max 5.75 V5
Ambient temperature TAmin -40 · max 125 °C5
Junction temperature TJmin -40 · max 150 °C5
Storage temperature Tstgmin -65 · max 150 °C5
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1); rating ±2000 Vmin -2000 · max 2000 V5
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101(2); rating ±500 Vmin -500 · max 500 V5
Motor power supply voltage VVMVMmin 4.5 · max 18 V5
Logic pin voltage VININx, nSLEEP, IN1/PH, IN2/EN, MODEmin 0 · max 5.5 V5
PWM frequency fPWMINx, IN1/PH, IN2/ENmin 0 · max 100 kHz5
Peak output current IOUTOUTx; power dissipation and thermal limits must be observedmin 0 · max 1.76 A5
Operating ambient temperature TAmin -40 · max 125 °C5
Operating junction temperature TJmin -40 · max 150 °C5
Junction-to-ambient thermal resistance RθJADRV8220 DSG (WSON), 8 PINStyp 94.7 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)DRV8220 DSG (WSON), 8 PINStyp 115.1 °C/W5
Junction-to-board thermal resistance RθJBDRV8220 DSG (WSON), 8 PINStyp 62.3 °C/W5
Junction-to-top characterization parameter ΨJTDRV8220 DSG (WSON), 8 PINStyp 11.6 °C/W5
Junction-to-board characterization parameter ΨJBDRV8220 DSG (WSON), 8 PINStyp 62 °C/W5
Junction-to-case (bottom) thermal resistance RθJC(bot)DRV8220 DSG (WSON), 8 PINStyp 38.6 °C/W6
VM active mode current IVMIN1 = 0 V, IN2 = 3.3 Vtyp 1.5 · max 2 mA6
VM sleep mode current IVMQSleep mode, VVM = 12 V, TJ = 27°Cmax 960 nA6
Turnon time tWAKESleep mode to active mode delaymax 65 us6
Autosleep turnoff time tAUTOSLEEPActive mode to autosleep mode delay, nSLEEP = 3.3 Vmin 0.9 · max 2.6 ms6
Turnoff time tSLEEPActive mode to sleep mode delay, nSLEEP = 0 Vtyp 1 us6
Input logic low voltage VILINx, nSLEEP, IN1/PH, IN2/ENmin 0 · max 0.35 V6
Input logic high voltage VIHINx, nSLEEP, IN1/PH, IN2/ENmin 1.45 · max 5.5 V6
Input logic hysteresis VHYSINx, nSLEEP, IN1/PH, IN2/ENmin 49 mV6
Input logic low current IILVI = 0 Vmin -1 · max 1 uA6
Input logic high current, IN1/EN, IN2/PH IIHVI = 3.3 Vmin 20 · max 50 uA6
Input logic high current, nSLEEP IIH_nSLEEPVI = 3.3 V, active modemin 60 · max 100 uA6
Input logic high current, nSLEEP IIH_nSLEEPVI = 3.3 V, autosleep modemax 42 nA6
Input pulldown resistance, IN1/EN, IN2/PH RPDTo GNDtyp 100 kΩ6
Tri-level input logic low voltage VTILMODE; maximum 0.22 × VnSLEEPmin 0 V6
Tri-level input logic high voltage VTIHMODE; minimum 0.75 × VnSLEEPmax 5.5 V6
Tri-level pulldown resistance RTPDto GND, sleep modetyp 1 MΩ6
Tri-level pulldown resistance RTPDto GND, active modetyp 130 kΩ6
Tri-level pullup resistance RTPUto nSLEEP buffered referencetyp 75 kΩ6
High-side MOSFET on resistance RDS(on)_HSIO = 0.2 Atyp 500 mΩ6
Low-side MOSFET on resistance RDS(on)_LSIO = –0.2 Atyp 500 mΩ6
Body diode forward voltage VSDIO = –0.5 Atyp 1 V6
Output rise time tRISEVOUTx rising from 10% to 90% of VVMtyp 150 ns6
Output fall time tFALLVOUTx falling from 90% to 10% of VVMtyp 150 ns6
Input to output propagation delay tPDInput crosses 0.8 V to VOUTx = 0.1×VVM, IO = 1 Atyp 135 ns6
Output dead time tDEADInternal dead timetyp 500 ns6
Leakage current into OUTx IOUTOUTx is Hi-Z, RL = 20 Ω to VMtyp 186 uA6
Leakage current into OUTx IOUTOUTx is Hi-Z, RL = 20 Ω to GNDtyp -3 nA6

Pins, by the datasheet

9
1 VM
Motor power supply; bypass to GND with a 0.1-uF ceramic capacitor and sufficient bulk capacitance rated for VM. · p. 4
2 OUT1
H-bridge output; connect to the motor or other load. · p. 4
3 OUT2
H-bridge output; connect to the motor or other load. · p. 4
4 GND
Device ground; connect to system ground. · p. 4
5 IN2/EN
H-bridge control input with an internal pulldown resistor. · p. 4
6 IN1/PH
H-bridge control input with an internal pulldown resistor. · p. 4
7 MODE
H-bridge control mode selection; tri-level input referenced to nSLEEP pin voltage. · p. 4
8 nSLEEP
Logic high enables the device; logic low enters low-power sleep mode. · p. 4
PAD PAD
Thermal pad; connect to system ground. · p. 4

Open-source boards using it

8
  • 2 layers100.1 × 121.4 mmPanel, the printed circuit board in 3D

    Panel

    da-penguin-guy/Proteus

    The Proteus is a modular collection of PCBs that will be used to develop the Virgil sound Protocol

    137 parts3
  • 4 layers114.3 × 114 mmBaSe PWR V4 0, the printed circuit board in 3D

    BaSe PWR V4 0

    M-Welsch/backup-server

    Backup Server (BaSe)

    109 parts3Apache-2.0
  • 4 layers96.5 × 116 mmMR Core, the printed circuit board in 3D

    MR Core

    hansgaensbauer/MR-Core

    Open Source Magnetic Resonance Imaging Console

    360 parts2CERN-OHL-W-2.0
  • 2 layers102.9 × 17.5 mmYals, the printed circuit board in 3D

    Yals

    el-bart/yals

    Yet Another Linear Servo

    46 parts1BSD-3-Clause
  • 2 layers84.3 × 39.4 mmShutdown manager mainboard, the printed circuit board in 3D

    Shutdown manager mainboard

    testudor/shutdown-manager-mainboard

    Power input module for 3D printers capable of performing safe shutdown procedures for SBCs like Raspberry PIs

    28 parts1CC-BY-SA-4.0
  • 2 layers20 × 114 mmVirgil Motor, the printed circuit board in 3D

    Virgil Motor

    da-penguin-guy/Proteus

    The Proteus is a modular collection of PCBs that will be used to develop the Virgil sound Protocol

    23 parts3
  • 2 layers50 × 14 mmEssen, the printed circuit board in 3D

    Essen

    machdyne/af

    Open-Source Pick and Place Autofeeder

    37 partsCERN-OHL-P-2.0

Parts like it

6

Questions

Is there a KiCad symbol and footprint for the DRV8220DSG?

Yes. The symbol is Driver_Motor:DRV8220DSG and the footprint Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DRV8220DSG?

WSON-8(2x2), with 9 pins. Its footprint is drawn on this page.

Where is the DRV8220DSG datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the DRV8220DSG?

JLCPCB lists it as part C3681269, with 3,008 in stock; the sellers' links on this page open their listings.

What can replace the DRV8220DSG?

Parts like it in the library: the DRV8837DSG by Texas Instruments, the DRV8837CDSG by Texas Instruments, the DRV8231ADSG by Texas Instruments and the DRV8837DSGR-TP by TECH PUBLIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DRV8220DSG?

8 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.