

Greenhouse control unit
- Size
- 188 × 90.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 102
- Pads
- 351
- Tracks, vias
- 600, 51
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Jun 2021
- Updated
- 23 May 2023
Overview
Greenhouse control unit is an open-source printed circuit board by nbolton, from the nbolton/greenhouse repository on GitHub. It is a 4-layer board of 188 × 90.2 mm with 89 parts on 102 nets, routed with 600 tracks and 51 vias.
It is built around the INA219AID, PCF8574ATS/3 and RFM69HW, with the IRF4905, STD30NF06LT4 and BC547 among its other parts. Its parts include 32 resistors, 18 transistors, 13 diodes, 10 connectors and 5 ICs. It belongs with the ESP32 boards of this library.
Main components
9INA219AID
SOIC-8-40℃~+125℃ 0.1uV/℃ 0V~26V 1 10uV 120dB 20nA 3V~5.5V 700uA Bidirectional detection、Zero drift / auto-zero、Input filter、Power monitoring、Digital output interface ±26V SOIC-8 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense AmplifiersPCF8574ATS/3
LSSOP-20-175mil-40℃~+85℃ 100kHz 2.5V~6V 2.5uA 25mA 300uA 8 8 I2C Interrupt Output Reset function、Cascading and address extension、Built-in LED driver LSSOP-20-175mil I/O Expanders ROHSNXP SemiconductorsI/O ExpandersRFM69HW
LCC-16_19.7X16mmLCC-16_19.7X16mm New Arrivals ROHSHopeRF Micro-electronicsUncategorisedIRF4905
TO-220-35℃~+175℃ 1 P-Channel 12nF 150nC@10V 1nF 2.5V 200W 450pF 60V 75A 9mΩ P-Channel TO-220 MOSFETs ROHSCmosMOSFETsSTD30NF06LT4
DPAK-55℃~+175℃ 1 N-channel 1.6nF 1.7V 22mΩ@10V 31nC@48V 35A 60V 60pF 70W DPAK MOSFETs ROHSSTMicroelectronicsMOSFETsBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)BC337
TO-92-31 NPN 100 100MHz 100nA 45V 5V 625mW 700mV 800mA NPN TO-92-3 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)SRD-12VDC-SL-C
插件,19.2x15.6mm100mΩ 10ms 10ms 12V 15A 250V@AC 360mW 400Ω 5 Non-Polarized - Single Coil One set changeover: 1C (SPDT - changeover) 插件,19.2x15.6mm Power Relays ROHS松乐Power RelaysU.FL-R-SMT-1
Up to 6GHz Ultra Small Surface Mount Male Coaxial Connectors U.FL SeriesHirose ElectricUncategorised
README
README.mdGreenhouse
An attempt to automate nature 🌶
Prerequesits
- VSCode with Platform.io extension
- MinGW if Windows
- Chocolatey:
choco install mingw - Alternative: MinGW
- Chocolatey:
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R12, R22, R26, R27, R28, R29, R30, R31, R32, R33 |
| 6 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | Q3, Q6, Q11, Q13, Q15, Q17 |
| 5 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R9, R19, R20, R24 |
| 5 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D5, D7 |
| 4 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R7, R11, R17 |
| 4 | D | Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_AnodeUp | D8, D9, D10, D11 |
| 4 | IRF4905 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q4, Q5 |
| 4 | Molex_KK-396_01x02 | Nick:Molex_KK-396_1x02_P3.96mm_Vertical | J1, J2, J7, J15 |
| 4 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4 |
| 4 | STD30NF06LT4 | Nick:TO-252-2 | Q14, Q16, Q19, Q20 |
| 3 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R21, R25 |
| 3 | 10nF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C2, C3 |
| 3 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q7, Q8, Q10 |
| 3 | D | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D4, D12, D13 |
| 2 | 0R001 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R1, R18 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R13, R14 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R16 |
| 2 | 33k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R15 |
| 2 | INA219 | Package_TO_SOT_SMD:SOT-23-8 | U3, U4 |
| 2 | PCF8574ATS | Package_SO:SSOP-20_4.4x6.5mm_P0.65mm | U1, U2 |
| 1 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 2kΩ? | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | 5V Buck | Nick:Buck_Module | J6 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92_Inline | Q9 |
| 1 | Beep_Jumper | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x08_Pin | Nick:Molex_KK-396_1x08_P3.96mm_Vertical | J5 |
| 1 | Conn_ESP32_DevKitV1_Female | Nick:PinSocket_ESP32_DevKitV1 | J10 |
| 1 | D | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D6 |
| 1 | Fuse | Nick:Fuse_3522-2_L | F1 |
| 1 | Molex_254_1x08 | Connector_Molex:Molex_KK-254_AE-6410-08A_1x08_P2.54mm_Vertical | J11 |
| 1 | PV MPPT module | Nick:MPPT-10A-Module | J4 |
| 1 | RFM69HW | Nick:HopeRF_RFM69HW | U5 |
| 1 | SRD-12VDC-SL-C | Nick:Relay_SRD-12VDC-SL-C | K1 |
| 1 | U.FL-R-SMT-1 | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | AE1 |
More from nbolton/greenhouse
3- 4 layers70 × 50 mm

- 4 layers70 × 50 mm

- 2 layers

Similar boards
- 2 layers70.2 × 91.5 mm

- 2 layers88.9 × 50.8 mm

- 2 layers170 × 115 mm

- 2 layers100 × 80 mm

- 2 layers118.9 × 56.6 mm

Gas tank temp reg PCB
aesirkth/Mimisbrunnr_gas_temp_ctrl
Mímisbrunnr gas tank temperature control unit
54 parts - 2 layers

- 2 layers100 × 100 mm

Ft150ts E
z-XOF-z/FT150TS
Tablero digital + launcher para Android que funciona solo con el teléfono del manubrio y está listo para una tarjeta ESP32 en la moto.
71 parts - 2 layers74.1 × 52 mm

Industrial mcp23017 input device v02
Pekaway/I2C-GPIO-extension
I2C Extension for the VAN PI CORE
74 parts1
Questions
How big is the Greenhouse control unit PCB?
It measures 188 × 90.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Greenhouse control unit use?
89 parts, built around the INA219AID, PCF8574ATS/3, RFM69HW and IRF4905. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Greenhouse control unit KiCad files?
From the nbolton/greenhouse repository on GitHub, at the commit this page was made from: the board is hardware/greenhouse-control-unit/greenhouse-control-unit.kicad_pcb and its schematic hardware/greenhouse-battery-junction/greenhouse-battery-junction.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Greenhouse control unit design in my own project?
Its repository states no licence, so its author keeps all rights: ask nbolton before reusing the design.