Skip to the content
12345678910111213141516

RFM69HW

HopeRF Micro-electronicsExtended

LCC-16_19.7X16mm New Arrivals ROHS

Part id
hoperf-micro-electronics/RFM69HW
Category
Uncategorised
Package
LCC-16_19.7X16mm
Pins
16
In stock
0 at JLCPCB (C7502089)
Used on
45 open-source boards

Overview

The RFM69HW is an uncategorised made by HopeRF Micro-electronics in a LCC-16_19.7X16mm package with 16 pins. LCC-16_19.7X16mm New Arrivals ROHS.

PCBKit's library has its KiCad symbol (RF_Module:RFM69HW, from KiCad's library) and its footprint (RF_Module:HOPERF_RFM69HW, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C7502089). 45 open-source boards in 25 repositories on GitHub use it.

Symbol

1RESET2DIO03DIO14DIO25DIO36DIO47DIO583.3V9GND10ANA12SCK13MISO14MOSI15NSS
RF_Module:RFM69HWFrom KiCad's library

Footprint

12345678910111213141516
RF_Module:HOPERF_RFM69HWFrom KiCad's library

Pinout

16
The pins of the RFM69HW
PinNameType
1RESETInput
2DIO0Input/output
3DIO1Input/output
4DIO2Input/output
5DIO3Input/output
6DIO4Input/output
7DIO5Input/output
83.3VPower in
9GNDPower in
10ANAOutput
11GNDPassive
12SCKInput
13MISOOutput
14MOSIInput
15NSSInput
16NCNot connected

Open-source boards using it

45See all 45
  • 2 layers65 × 31 mmDiy tracker, the printed circuit board in 3D

    Diy tracker

    glidernet/diy-tracker

    Do-it-Yourself OGN Tracker software

    27 parts30GPL-3.0
  • 2 layers35.6 × 20.3 mmSTM32 Sensor, the printed circuit board in 3D

    STM32 Sensor

    freynder/STM32_Sensor

    Tiny STM32 board with RFM69 support

    27 parts12
  • 2 layers65 × 30 mmMySensorsPiGw, the printed circuit board in 3D

    MySensorsPiGw

    llegoff/MySensorsPiGw

    MySensors RFM69 & NRF24L Gateway for Raspberry Pi (zero & B)

    29 parts8
  • 2 layers50 × 50 mmMysensorsGW, the printed circuit board in 3D

    MysensorsGW

    mysensors/SensebenderGW

    Gateway for MySensors

    76 parts7
  • 2 layers55 × 35 mmMini BT Pcb-328P, the printed circuit board in 3D

    Mini BT Pcb-328P

    d-diot/Mini-BT-Pcb-328P

    MySensors ATMega328P + RFM69 and NRF24 battery (AAA and CR2032) powered pcb

    54 parts3
  • 2 layers48 × 35 mmPax BB5, the printed circuit board in 3D

    Pax BB5

    CalinRadoni/pax-BB5

    STM32L051K8T BaseBoard with RFM69HW and external Flash memory with support for PlatformIO

    27 parts2GPL-3.0

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the RFM69HW?

Yes. The symbol is RF_Module:RFM69HW and the footprint RF_Module:HOPERF_RFM69HW, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the RFM69HW?

LCC-16_19.7X16mm, with 16 pins. Its footprint is drawn on this page.

Where can I order the RFM69HW?

JLCPCB lists it as part C7502089, with 0 in stock; the sellers' links on this page open their listings.

What can replace the RFM69HW?

Parts like it in the library: the RFM69HW-868S2 by HOPE MICROELECTRONICS and the RFM69HW-433S2R by HopeRF Micro-electronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the RFM69HW?

45 boards in 25 repositories on GitHub; the most starred are listed on this page, with their KiCad files.