

TelecomESP32
- Size
- 88.9 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 33
- Pads
- 100
- Tracks, vias
- 147, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Apr 2026
- Updated
- 24 Apr 2026
Overview
TelecomESP32 is an open-source printed circuit board by eduardo-lopez-17, from the eduardo-lopez-17/TelecomESP32 repository on GitHub, published under the MIT licence. It is a 2-layer board of 88.9 × 50.8 mm with 26 parts on 33 nets, routed with 147 tracks and 6 vias.
It is built around the SIM800L, BH1750FVI-TR and BME280, with the INA219AID and RFM69HW among its other parts. Its parts include 10 connectors, 6 capacitors, 3 ICs and 1 resistor. It belongs with the ESP32 boards of this library.
Main components
5SIM800L
SMD,17.8x15.8mm-40℃~+85℃ 3.4V~4.4V 850MHz、900MHz、1800MHz、1900MHz GPIO、ADC、PCM、SIM card GPRS、GSM PCM voice function、DTMF function、CMUX function、USSD function SMD,17.8x15.8mm 2G/3G/4G/5G Modules ROHSSIMCom Wireless Solutions2G/3G/4G/5G ModulesBH1750FVI-TR
WSOF-6-40℃~+85℃ 2.4V~3.6V 65.535klx I2C Light Intensity WSOF-6 Ambient Light Sensors ROHSROHM SemiconductorAmbient Light SensorsBME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity SensorINA219AID
SOIC-8-40℃~+125℃ 0.1uV/℃ 0V~26V 1 10uV 120dB 20nA 3V~5.5V 700uA Bidirectional detection、Zero drift / auto-zero、Input filter、Power monitoring、Digital output interface ±26V SOIC-8 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense AmplifiersRFM69HW
LCC-16_19.7X16mmLCC-16_19.7X16mm New Arrivals ROHSHopeRF Micro-electronicsUncategorised
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3, C4, C5 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H2 |
| 1 | +BATT | TestPoint:TestPoint_Pad_D3.0mm | TP1 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 1K | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | BAT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | BH1750FVI-TR | SamacSys_Parts:WSOF6 | IC1 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U1 |
| 1 | ESP32 XIAO LEFT | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | ESP32 XIAO RIGHT | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | GND | TestPoint:TestPoint_Pad_D3.0mm | TP2 |
| 1 | HC-SR04P | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | INA219 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J11 |
| 1 | LOGO | footprints:PichuFSilkscreen | G*** |
| 1 | MPU6050 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J9 |
| 1 | NEO6MV2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | OLED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | RFM69HW | RF_Module:HOPERF_RFM69HW | U4 |
| 1 | SIM800L | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Soil | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
Similar boards
- 4 layers188 × 90.2 mm

- 2 layers133.5 × 95 mm

Hmi
kajusK/Pneumobil
Control and telemetry system for BUT Falcon pneumobil for Aventics Pneumobil competition
122 parts - 2 layers160 × 32 mm

- 2 layers27.7 × 44 mm

- 2 layers75 × 65 mm

Esp32-env sensor
aluisioalves123/esp32-env-sensor
Placa de sensor ambiental com ESP32-WROOM-32E projetada do zero no KiCad 9: USB-C com CH340C e auto-program, BME280 e BH1750FVI em I2C, regulacao AMS1117-3.3.
33 partsMIT - 4 layers60 × 80 mm

Wisp
huulanka/wisp
Open-source ESP32 room climate monitor — CO2, VOC, humidity, temperature and light sensing with custom PCB, MQTT/HomeKit integration, and OTA firmware updates. Full hardware + software, from schematic to BOM.
91 partsMIT - 2 layers68.3 × 59 mm

SoilHealth
userdorukhan/SoilHealthPCB
Custom PCB project for monitoring soil moisture, temperature, humidity, and light using ESP32 and solar power.
30 parts - 6 layers60 × 30 mm

Udsp card
crsknr/hw_udsp-card
A compact DSP development board for real-time embedded audio and sensing
221 parts2GPL-3.0
Questions
How big is the TelecomESP32 PCB?
It measures 88.9 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TelecomESP32 use?
26 parts, built around the SIM800L, BH1750FVI-TR, BME280 and INA219AID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TelecomESP32 KiCad files?
From the eduardo-lopez-17/TelecomESP32 repository on GitHub, at the commit this page was made from: the board is TelecomESP32.kicad_pcb and its schematic TelecomESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TelecomESP32 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).