Skip to the content
2 layers68.3 × 59 mmSoilHealth, the printed circuit board in 3D

Custom PCB project for monitoring soil moisture, temperature, humidity, and light using ESP32 and solar power.

Size
68.3 × 59 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
51
Pads
146
Tracks, vias
256, 59
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Jun 2025
Updated
12 Jun 2025

Overview

SoilHealth is an open-source printed circuit board by userdorukhan, from the userdorukhan/SoilHealthPCB repository on GitHub. It is a 2-layer board of 68.3 × 59 mm with 30 parts on 51 nets, routed with 256 tracks and 59 vias.

It is built around the ESP32-S2-SOLO-2U-N4, BH1750FVI-TR and BME280, with the AP2112K-3.3 and B2B-PH-K-S among its other parts. Its parts include 11 resistors, 7 capacitors, 5 ICs, 4 connectors and 3 diodes. It belongs with the ESP32 boards of this library.

Main components

5

README

README.md

🌱 SoilHealth – Smart Agriculture PCB Project

SoilHealth is a smart environmental monitoring system designed as part of the Hope DeCal at UC Berkeley. This project aims to measure key soil and atmospheric parameters to support precision agriculture, gardening, and sustainability efforts. The custom-designed PCB integrates multiple sensors, solar-powered charging, and wireless data transmission via an ESP32 microcontroller.


🔧 Features

  • Custom PCB Design for low-power, compact, and modular sensor integration
  • Solar-Powered System with a Li-ion battery and charging circuit
  • ESP32 Microcontroller for sensor interfacing and Wi-Fi communication
  • U.FL Antenna Connector for extended wireless range
  • Data Logging to Firebase for real-time remote monitoring

🌡️ Sensors Used

SensorMeasurementNotes
SEN0193Soil MoistureCapacitive, analog output
DS18B20Soil TemperatureWaterproof, 1-Wire protocol
BH1750Light IntensityDigital I2C sensor
BME280Temperature, Humidity, PressureI2C protocol

⚡ Power Management

  • Solar Panel Input
  • Lithium-Ion Battery charging via onboard circuit
  • Voltage Regulator to ensure stable 3.3V supply to ESP32 and sensors

📡 Connectivity

  • Wi-Fi Transmission via ESP32
  • Firebase Integration for remote data storage and visualization

📐 PCB Highlights

  • Designed using KiCad
  • Double-layer board optimized for low noise and compact routing
  • Separate power domain for analog sensors to reduce interference
  • Test points for debugging and voltage verification

🛠️ Future Improvements

  • Add onboard SD card logging for offline operation
  • Improve power optimization via deep sleep modes
  • Add additional sensors (e.g., CO₂, VOC) for advanced monitoring

Parts

30
QtyValueFootprintReferences
34.7KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR7, R8, R10
20.1 uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5, C6
225Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R4
25.1KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5, R6
2DDiode_SMD:D_SMAD1, D2
10.33KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR11
11 uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC8
1100 nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC7
110KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR9
11KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2
12KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
14.7 uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1
147 pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC4
147pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC3
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U1
1B2B-PH-K-S1:BatteryHeadJ4
1BH1750FVI-TR1:LightEmmityU3
1BME280Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumberingU2
1Conn_01x03Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ2
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1ESP32-S2-SOLO-2U-N41:ESP32-S2-SOLO-2U_EXPU4
1LEDDiode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolderD3
1MCP73831-2-OTPackage_TO_SOT_SMD:SOT-23-5U5
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1

Similar boards

  • 2 layers160 × 32 mmMatrixClock, the printed circuit board in 3D

    MatrixClock

    middelink/MatrixClock

    MatrixClock - source code, schematics and pcb layout

    70 parts2MIT
  • 2 layers27.7 × 44 mmMySXSensors, the printed circuit board in 3D

    MySXSensors

    mczerski/MySXSensors

    MySX board for some sensor modules

    14 parts1
  • 2 layers75 × 65 mmEsp32-env sensor, the printed circuit board in 3D

    Esp32-env sensor

    aluisioalves123/esp32-env-sensor

    Placa de sensor ambiental com ESP32-WROOM-32E projetada do zero no KiCad 9: USB-C com CH340C e auto-program, BME280 e BH1750FVI em I2C, regulacao AMS1117-3.3.

    33 partsMIT
  • 2 layers88.9 × 50.8 mmTelecomESP32, the printed circuit board in 3D

    TelecomESP32

    eduardo-lopez-17/TelecomESP32

    26 partsMIT
  • 4 layers60 × 80 mmWisp, the printed circuit board in 3D

    Wisp

    huulanka/wisp

    Open-source ESP32 room climate monitor — CO2, VOC, humidity, temperature and light sensing with custom PCB, MQTT/HomeKit integration, and OTA firmware updates. Full hardware + software, from schematic to BOM.

    91 partsMIT
  • 4 layers90 × 70 mmInclinationMeter, the printed circuit board in 3D

    InclinationMeter

    soldernerd/InclinationMeter

    A battery-powered, Bluetooth-enabled precision electronic level instrument for machine tool geometry inspection and granite surface plate qualification.

    118 parts
  • 4 layers96.8 × 51 mmPocketmuseum edu v0, the printed circuit board in 3D

    Pocketmuseum edu v0

    radutolontan/BASM_Pocket_Museum

    The Pocket Lab is the next-generation approach to science education. Designed by the Bucharest Applied STEAM Museum, it brings scientific exploration into anyone's hands.

    114 parts1
  • 4 layers102 × 33 mmNetscore, the printed circuit board in 3D

    Netscore

    arcticlula/Netscore

    Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.

    140 partsMIT

Questions

How big is the SoilHealth PCB?

It measures 68.3 × 59 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SoilHealth use?

30 parts, built around the ESP32-S2-SOLO-2U-N4, BH1750FVI-TR, BME280 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SoilHealth KiCad files?

From the userdorukhan/SoilHealthPCB repository on GitHub, at the commit this page was made from: the board is SoilHealth.kicad_pcb and its schematic SoilHealth.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SoilHealth design in my own project?

Its repository states no licence, so its author keeps all rights: ask userdorukhan before reusing the design.