Skip to the content
2 layers60 × 50 mmTwoChannelRelayModule, the printed circuit board in 3D

TwoChannelRelayModule

nandanpi/PCB-Design
Size
60 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
18
Pads
79
Tracks, vias
116, 7
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
15 Jan 2025
Updated
21 May 2025

Overview

TwoChannelRelayModule is an open-source printed circuit board by nandanpi, from the nandanpi/PCB-Design repository on GitHub. It is a 2-layer board of 60 × 50 mm with 25 parts on 18 nets, routed with 116 tracks and 7 vias.

It is built around the AMS1117-5.0 and BC547. Its parts include 5 resistors, 5 diodes, 4 connectors, 2 capacitors and 2 transistors.

Main components

2

Parts

25
QtyValueFootprintReferences
3220ΩResistor_SMD:R_0201_0603MetricR1, R2, R5
210µFCapacitor_SMD:C_0201_0603MetricC1, C2
22.2kΩResistor_SMD:R_0201_0603MetricR3, R4
2BC547Package_TO_SOT_SMD:SOT-23Q1, Q2
2DDiode_SMD:D_0201_0603MetricD3, D5
2LED2LED_SMD:LED_0603_1608MetricD2, D4
2Screw_Terminal_01x03TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mmJ1, J2
2~Custom Relay:RelayRelay1, Relay2
1AMS1117-5.0Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1LEDLED_SMD:LED_0603_1608MetricD1
1~Connector_BarrelJack:BarrelJack_HorizontalCON1

The 21 most common of 25 parts.

More from nandanpi/PCB-Design

4
  • 2 layers60 × 40 mm7Seg, the printed circuit board in 3D

    7Seg

    nandanpi/PCB-Design

    15 parts
  • 2 layers39.9 × 30 mm555Timer, the printed circuit board in 3D

    555Timer

    nandanpi/PCB-Design

    14 parts
  • 2 layers40 × 24 mmSEE, the printed circuit board in 3D

    SEE

    nandanpi/PCB-Design

    11 parts

Similar boards

  • 4 layers188 × 103 mmCAN DISPLAY, the printed circuit board in 3D

    CAN DISPLAY

    VladxIL/NMEA2000_0183_Display

    Display NMEA2000 and NMEA0183 on DWIN 7" Display

    130 partsGPL-3.0
  • 2 layers100 × 100 mmHeatplate v1.1, the printed circuit board in 3D

    Heatplate v1.1

    DerSpatz/PCB-reflow-solder-heat-plate

    hardware design for a PCB reflow solder heat plate

    57 parts179MIT
  • 2 layers20.3 × 110 mm4HPico, the printed circuit board in 3D

    4HPico

    rheslip/2HPico-Eurorack-Module-Hardware

    2HP Eurorack module based on Raspberry Pi Pico 2

    73 parts84
  • 2 layers36 × 43 mmAsac fc rev a, the printed circuit board in 3D

    Asac fc rev a

    victorhook/asac-fc

    asac fc is an rp2040 based flight controller made for FPV drone flying

    119 parts52GPL-3.0
  • 2 layers73 × 113 mmFT817 buddy v4, the printed circuit board in 3D

    FT817 buddy v4

    g7uhn/ft817_buddy

    A companion display & controls for the FT-817

    76 parts28CC-BY-SA-4.0
  • 2 layers30 × 110.5 mmKicad main, the printed circuit board in 3D

    Kicad main

    johannesstrueber/dots

    DOTS eurorack module pcb schematics and code ATMega328 based

    72 parts28
  • 2 layers139.7 × 88.9 mmCharge Controller, the printed circuit board in 3D

    Charge Controller

    jharvey/Charge_Controller

    MPPT hardware which uses FUGU firmware

    163 parts24
  • 2 layers135 × 100 mmHotPlate V1.0, the printed circuit board in 3D

    HotPlate V1.0

    aitesam961/Reflow_Hotplate

    A reflow Hotplate for DIY SMD assembly

    89 parts23GPL-3.0

Questions

How big is the TwoChannelRelayModule PCB?

It measures 60 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TwoChannelRelayModule use?

25 parts, built around the AMS1117-5.0 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TwoChannelRelayModule KiCad files?

From the nandanpi/PCB-Design repository on GitHub, at the commit this page was made from: the board is Projects/TwoChannelRelayModule/TwoChannelRelayModule.kicad_pcb and its schematic Projects/555Timer/555Timer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TwoChannelRelayModule design in my own project?

Its repository states no licence, so its author keeps all rights: ask nandanpi before reusing the design.