

Processor Board
Hardware files for ODR-1 Radio
- Size
- 158.5 × 99.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 339
- Nets
- 205
- Pads
- 891
- Tracks, vias
- 1,796, 256
- Pours
- 24
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 1 Aug 2015
- Updated
- 14 Jan 2018
Overview
Processor Board is an open-source printed circuit board by N7IFC, from the N7IFC/ODR-1_Hardware repository on GitHub. It is a 4-layer board of 158.5 × 99.9 mm with 339 parts on 205 nets, routed with 1,796 tracks and 256 vias.
It is built around the LM43600PWP, LM43601PWP and ENC28J60-I/SS, with the MMZ2012R102A, TP1 and IRLML2060TRPBF among its other parts. Its parts include 107 capacitors, 80 resistors, 12 connectors, 8 ICs and 3 diodes. It belongs with the PIC boards of this library.
Main components
8LM43600PWP
HTSSOP-16-EP-40℃~+125℃@(TJ) 1 1V~28V 2.2MHz 3.5V~36V 33uA 500mA Adjustable Buck Buck Built-in Yes HTSSOP-16-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLM43601PWP
HTSSOP-16-EP-40℃~+125℃@(TJ) 1 1A 1V~28V 2.2MHz 3.5V~36V 33uA Adjustable Buck Built-in Light load efficient mode、Adjustable soft-start、Operating status indication、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、Output voltage tracking、Built-in LDO regulator Step-down type Yes HTSSOP-16-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersENC28J60-I/SS
SSOP-28-208mil-40℃~+85℃ 1 10BASE-T 3.3V 8KB SPI SPI Yes SSOP-28-208mil Ethernet Controllers ROHSMicrochip TechnologyEthernet ControllersMMZ2012R102A
0805SMT Chip Bead for General Signal Line (MMZ Series)TDKUncategorisedTP1
-- Test leads ROHSFLUKEUncategorisedIRLML2060TRPBF
SOT-23-55℃~+150℃ 1 N-channel 1.25W 1.2A 2.5V 480mΩ@10V 6.6pF 60V 64pF 670pC SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETsLM4040C25FTA
SOT-23-40℃~+125℃ 100ppm/℃ 15mA 2.5V 35uVrms 62uA 62uA Fixed Parallel ±0.5% SOT-23 Voltage Reference ROHSDiodes IncorporatedVoltage ReferenceM-10
-Barrier Terminal BlocksCurtis Industries
Parts
339| Qty | Value | Footprint | References |
|---|---|---|---|
| 100 | x | ViaGND40 | x, x, x, x, x, x, x, x, x, x, x, x, x, x, x, x +84 |
| 35 | 0.01uF | SM0805-1 | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +19 |
| 26 | 220 | SM0805-1 | R18, R19, R20, R21, R22, R23, R24, R26, R27, R28, R29, R30, R31, R32, R33, R34 +10 |
| 24 | 0.1uF | SM0805-1 | C33, C39, C40, C41, C42, C43, C44, C45, C47, C53, C54, C61, C63, C66, C67, C71 +8 |
| 20 | 10.0K | SM0805-1 | R3, R4, R5, R6, R12, R13, R14, R15, R16, R17, R44, R45, R55, R57, R58, R59 +4 |
| 10 | MPZ2012S102A | SM0805-1 | FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB12, FB13, FB15 |
| 9 | 4.7uF | SM1206-1 | C34, C38, C81, C83, C93, C95, C101, C105, C106 |
| 8 | 22.1 | SM0805-1 | R1, R2, R9, R10, R11, R25, R38, R64 |
| 7 | 1000pF | SM0805-1 | C31, C32, C76, C77, C78, C79, C104 |
| 5 | 1uF | SM1206-1 | C35, C59, C60, C92, C96 |
| 5 | MMZ2012R102A | SM0805-1 | FB8, FB9, FB10, FB11, FB14 |
| 5 | TP_1 | TP_TH | TP1, TP2, TP3, TP4, TP5 |
| 4 | 0.22uF | SM0805-1 | C55, C56, C57, C58 |
| 4 | 1.00K | SM0805-1 | R46, R47, R77, R79 |
| 4 | 10uF | SM1206-1 | C46, C48, C62, C65 |
| 4 | 15pF | SM0805-1 | C49, C50, C80, C98 |
| 4 | 47uF | SM1206-1 | C68, C69, C82, C107 |
| 4 | 49.9 | SM0805-1 | R67, R68, R69, R70 |
| 4 | 6pF | SM0805-1 | C51, C52, C91, C94 |
| 4 | 75.0 | SM0805-1 | R74, R75, R76, R80 |
| 4 | JACK_5P | AUDIO-5 | J11, J13, J14, J15 |
| 3 | 22uF | SM1206-1 | C64, C70, C100 |
| 3 | M-12 | SIL-12-1 | P3, P5, P7 |
| 2 | 0.47uF | SM0805-1 | C87, C103 |
| 2 | 1M | SM0805-1 | R61, R71 |
| 2 | 2.2uF | SM1206-1 | C85, C102 |
| 2 | 40.2K | SM0805-1 | R65, R73 |
| 2 | IRLML2060TRPBF | SOT23-1 | Q1, Q2 |
| 2 | TVS_ARRAY_4CH | SOT23-6L | U1, U5 |
| 1 | 1.91K | SM0805-1 | R50 |
| 1 | 100 | SM0805-1 | R52 |
| 1 | 100K | SM0805-1 | R81 |
| 1 | 10uH | SM2233 | L1 |
| 1 | 12.000 MHz | CRYSTAL_4 | X2 |
| 1 | 13.7K | SM0805-1 | R49 |
| 1 | 1A_30V_SCH | SOD123F | D1 |
| 1 | 2.32K | SM0805-1 | R63 |
| 1 | 2.70K | SM0805-1 | R56 |
| 1 | 22uH | SM2233 | L2 |
| 1 | 249K | SM0805-1 | R72 |
| 1 | 25MHz | CRYSTAL_4 | X3 |
| 1 | 270 | SM0805-1 | R66 |
| 1 | 32.768 KHz | CRYSTAL_4L | X1 |
| 1 | 4.75K | SM0805-1 | R51 |
| 1 | 432K | SM0805-1 | R62 |
| 1 | CONN_6 | SIL-6_RA | P12 |
| 1 | CONN_8X2 | HDR_8x2_RA | J9 |
| 1 | DSPIC33EP512MU810-I/PF (14mm) | TQFP_100_14MM | U2 |
| 1 | ENC28J60-I/SS | SSOP28-1 | U6 |
| 1 | GRN | SM_LED_RA | D3 |
| 1 | LM4040C25 | SOT23-1 | D2 |
| 1 | LM43600 | PWRPAD16 | U8 |
| 1 | LM43601 | PWRPAD16 | U7 |
| 1 | M-10 | SIL-10-1 | P1 |
| 1 | M95256 | SO8N-1 | U3 |
| 1 | OSHW-logo_silkscreen-front_5mm | OSHW-logo_silkscreen-front_5mm | G*** |
| 1 | RJ45_LP_UNS | RJ45-8LP | J16 |
| 1 | TLV320AIC3204 | VQFN32 | U4 |
| 1 | TRANSFO_ETHER | XFMR_ETH16 | T1 |
| 1 | USB_MICRO_AB | USB_MICRO_AB | J10 |
More from N7IFC/ODR-1_Hardware
2- 4 layers144.8 × 99.9 mm

- 2 layers93.6 × 48.9 mm

Similar boards
- 4 layers84 × 51 mm

A500-sd plus controller
Mathesar/a500-sd-plus-controller
SD-card plus Ethernet controller for the Amiga 500
84 parts18 - 4 layers52 × 70 mm

- 2 layers151 × 131 mm

- 4 layers100 × 83 mm

Module17-Mainboard
M17-Project/Module_17
M17 modem board for 9600-baud capable radios
209 parts129CERN-OHL-W-2.0 - 4 layers55.9 × 78.7 mm

- 4 layers133.9 × 165.1 mm

Main VCO board
JordanAceto/micro_ox
Monosynth with analog signal path and digital controls. SSI2130 VCOs and SSI2140 VCF.
295 parts8CC-BY-4.0 - 4 layers99 × 64 mm

- 4 layers50 × 75 mm

Questions
How big is the Processor Board PCB?
It measures 158.5 × 99.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Processor Board use?
339 parts, built around the LM43600PWP, LM43601PWP, ENC28J60-I/SS and MMZ2012R102A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Processor Board KiCad files?
From the N7IFC/ODR-1_Hardware repository on GitHub, at the commit this page was made from: the board is Processor_Board_A/Processor Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Processor Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask N7IFC before reusing the design.