

Synermycha electronics
- Size
- 50 × 75 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 158
- Nets
- 104
- Pads
- 573
- Tracks, vias
- 1,549, 182
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Feb 2020
- Updated
- 30 Nov 2022
Overview
Synermycha electronics is an open-source printed circuit board by synergia, from the synergia/synermycha-electronics repository on GitHub. It is a 4-layer board of 50 × 75 mm with 158 parts on 104 nets, routed with 1,549 tracks and 182 vias.
It is built around the CP2102N-A01-GQFN28R, DRV8835DSS and LM1117LDX-1.8, with the MPU-9250, TS5A3167DBVR-TP and WS2812B among its other parts. Its parts include 50 resistors, 37 capacitors, 24 diodes, 15 connectors and 10 ICs. It belongs with the ESP8266 and STM32 boards of this library.
Main components
11CP2102N-A01-GQFN28R
QFN-28-EP(5x5)-40℃~+85℃ 13.7mA 195uA 3Mbps 3V~3.6V Transceiver USB 2.0 QFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB ConvertersDRV8835DSS
WSON-12-EP(2x3)-40℃~+150℃ 1.5A 2 2V~7V 305mΩ 95nA Yes WSON-12-EP(2x3) Brushed DC Motor Drivers ROHSTexas InstrumentsStepper Motor DriverLM1117LDX-1.8
WSON-8(4x4)0℃~+125℃@(Tj) 1 1.2V@(800mA) 1.8V 15V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection Positive WSON-8(4x4) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMPU-9250
QFN-24-EP(3x3)-40℃~+85℃ 2.4V~3.6V 8uA IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersTS5A3167DBVR-TP
SOT-23-5Analog Switches, MultiplexersTECH PUBLICWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedDTSM-32N-V-T/R
SMD,6x3.5mm-25℃~+70℃ 12V 3.5mm 50mA 5mm 6mm J-Lead No Rectangular Button SPST Surface Mount,Vertical Without Bracket SMD,6x3.5mm Tactile Switches ROHSDiptronicsTactile SwitchesBC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)IRLML2060TRPBF
SOT-23-55℃~+150℃ 1 N-channel 1.25W 1.2A 2.5V 480mΩ@10V 6.6pF 60V 64pF 670pC SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETsIRLML9301TRPBF
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 2.4V 3.6A 30V 388pF 4.8nC@4.5V 64mΩ@10V SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETsBAT54WS
SOD-3231 Independent 100mA 1V@100mA 2uA@25V 30V 600mA SOD-323 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
as5045b_board/README.mdsynermycha-electronics
Parts
158| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C9, C15, C17, C18, C19, C23, C24, C25, C28, C29, C32, C33, C34, C36 |
| 13 | 2K7 | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R30, R31, R32, R34, R35, R36, R37, R38, R39, R40 |
| 10 | WS2812B | WS2812-2020:WS28122020 | D7, D8, D9, D10, D11, D12, D13, D20, D21, D22 |
| 9 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C5, C14, C16, C20, C26, C37 |
| 8 | 10K | Resistor_SMD:R_0402_1005Metric | R7, R8, R9, R10, R18, R19, R29, R55 |
| 8 | 1uF | Capacitor_SMD:C_0402_1005Metric | C6, C7, C8, C10, C11, C12, C13, C21 |
| 7 | 270 | Resistor_SMD:R_0402_1005Metric | R22, R23, R24, R25, R26, R27, R28 |
| 7 | RED, 5mA | LED_SMD:LED_0402_1005Metric | D2, D3, D4, D5, D14, D23, D24 |
| 5 | 140R | Resistor_SMD:R_0402_1005Metric | R42, R43, R46, R49, R50 |
| 5 | Conn_01x05 | connector_brd2brd:01x05_1.0x0.5mm_SMD | J12, J13, J14, J15, J16 |
| 5 | YELLOW | LED_SMD:LED_0402_1005Metric | D15, D16, D17, D18, D19 |
| 4 | DTSM32N | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2, SW3, SW4 |
| 4 | LM1117LDX | Package_SON:WSON-8_4x4mm_P0.8mm | U1, U2, U3, U5 |
| 3 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4 |
| 2 | 100K | Resistor_SMD:R_0402_1005Metric | R51, R52 |
| 2 | 100uF | Capacitor_SMD:C_0805_2012Metric | C2, C22 |
| 2 | 12K | Resistor_SMD:R_0402_1005Metric | R16, R17 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C30, C31 |
| 2 | 866R | Resistor_SMD:R_0402_1005Metric | R3, R53 |
| 2 | Conn_01x02 | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J2, J3 |
| 2 | Conn_01x04 | connector_brd2brd:01x04_1.0x0.5mm_SMD | J7, J8 |
| 2 | IRLML2060TRPBF | Package_TO_SOT_SMD:SOT-23 | Q5, Q6 |
| 2 | IRLML9301TRPBF | Package_TO_SOT_SMD:SOT-23 | Q1, Q7 |
| 2 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J4, J11 |
| 1 | 1.3K | Resistor_SMD:R_0402_1005Metric | R33 |
| 1 | 16Mhz, 18pF | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | 1K6 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C35 |
| 1 | 2K2 | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 2K49 | Resistor_SMD:R_0402_1005Metric | R54 |
| 1 | 2K8 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 33R | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 3K3 | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 3K32 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 3K9 | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C27 |
| 1 | 620R | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 750R | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | A1250WV-S-4P | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J6 |
| 1 | BAT54WS | Diode_SMD:D_SOD-323 | D1 |
| 1 | BATT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | CMT-5023S | CMT-5023S-SMT-TR:CMT5023SSMTTR | BZ1 |
| 1 | CP2102N-A01-GQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U8 |
| 1 | Conn_01x03 | Button_Switch_SMD:SW_SPDT_CK-JS102011SAQN | J17 |
| 1 | DRV8835 | Package_SON:WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65 | U4 |
| 1 | ESP_01 | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical_SMD | J5 |
| 1 | LOGO | graphics:SynerMycha_Synergia_silk_screen_12.1x12.1 | G*** |
| 1 | LOGO | graphics:SynerMycha_napis_silk_screen_45.1x17mm | G*** |
| 1 | LOGO | synermycha-electronics:Synergia_logo_horizontal_11.4x1.8mm | G*** |
| 1 | MPU-9250 | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | U12 |
| 1 | RED | LED_SMD:LED_0402_1005Metric | D6 |
| 1 | STM14_SW | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | U14 |
| 1 | STM32F446RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U13 |
| 1 | TS5A3167DBVR | Package_TO_SOT_SMD:SOT-23-5 | U9 |
The 152 most common of 158 parts.
More from synergia/synermycha-electronics
2- 4 layers21.8 × 12 mm

- 4 layers5 × 3 mm

Similar boards
- 2 layers156.6 × 125.2 mm

- 2 layers114.4 × 26.7 mm

Robot1
iwasz/robot-hw-design
Open this repo with KiCad. Firmware is here : http://github.com/iwasz/robot-firmware
111 parts1 - 4 layers100 × 83 mm

Module17-Mainboard
M17-Project/Module_17
M17 modem board for 9600-baud capable radios
209 parts129CERN-OHL-W-2.0 - 2 layers70 × 70 mm

Fwrtss
ynsta/fwrtss
Open source hardware and software project of a regulated soldering station for RT soldering tips
103 parts7 - 4 layers99 × 64 mm

- 4 layers80.6 × 60.6 mm

Lorawan sensor node v2
ElektorLabs/lorawan-sensor-node-v2
Solar Powered LoRaWAN Sensor Node V2
84 parts1GPL-3.0 - 4 layers91 × 52 mm

Filament dryer monitor
alessandrocardelli/filament-dryer-monitor
ESP32 controller for eSUN eBOX Lite. main is the non-heating SAFE BRING-UP reference; its heater output remains locked OFF.
110 parts - 2 layers108 × 75 mm

ESP32 C3 Zigbee Temp
Cath272/ESP32-Low-Power-Temp-Monitor
In the project files you may find ESP32-C3 instead of ESP32-C6. I named it wrong when i created the project. The issue is just the file names, the footprints are correct and use a C6.
75 partsGPL-3.0
Questions
How big is the Synermycha electronics PCB?
It measures 50 × 75 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Synermycha electronics use?
158 parts, built around the CP2102N-A01-GQFN28R, DRV8835DSS, LM1117LDX-1.8 and MPU-9250. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Synermycha electronics KiCad files?
From the synergia/synermycha-electronics repository on GitHub, at the commit this page was made from: the board is synermycha-electronics.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Synermycha electronics design in my own project?
Its repository states no licence, so its author keeps all rights: ask synergia before reusing the design.