Skip to the content

DRV8835DSS

Texas InstrumentsExtended

-40℃~+150℃ 1.5A 2 2V~7V 305mΩ 95nA Yes WSON-12-EP(2x3) Brushed DC Motor Drivers ROHS

Part id
ti/DRV8835DSS
Category
Stepper Motor Driver
Package
WSON-12-EP(2x3)
Pins
13
In stock
0 at JLCPCB (C129328)
Used on
44 open-source boards

Overview

The DRV8835DSS is a stepper Motor Driver made by Texas Instruments in a WSON-12-EP(2x3) package with 13 pins. -40℃~+150℃ 1.5A 2 2V~7V 305mΩ 95nA Yes WSON-12-EP(2x3) Brushed DC Motor Drivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:DRV8835DSSR, from EasyEDA) and its footprint (EasyEDA_Cloud:WSON-12_L3.0-W2.0-P0.50-BL-EP, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C129328). 44 open-source boards in 38 repositories on GitHub use it.

Symbol

1VM2AOUT13AOUT24BOUT15BOUT26GND7BIN2/BENBL8BIN1/BPHASE9AIN2/AENBL10AIN1/APHASE11MODE12VCC13PAD
EasyEDA_Cloud:DRV8835DSSRFrom EasyEDA

Footprint

EasyEDA_Cloud:WSON-12_L3.0-W2.0-P0.50-BL-EPFrom EasyEDA

From the datasheet

16
Supply, least
2 V · VCC, recommended operating min · p. 5
Supply, most
7 V · VCC, recommended operating max · p. 5
Supply, most
11 V · VM, recommended operating max · p. 5
Supply, absolute maximum
12 V · VM, absolute max · p. 5
Supply, absolute maximum
7 V · VCC, absolute max · p. 5
Works from
-40 °C · Operating temperature min, DRV8835DSSR · p. 18
Works up to
85 °C · Operating temperature max, DRV8835DSSR · p. 18
Junction, hottest
150 °C · Operating junction temperature absolute max · p. 5
Takes working
1.1 mA · sum of VM and VCC typical operating currents, 50 kHz PWM, no load, VM = 5 V, VCC = 3 V · p. 6
Takes at most
4 mA · sum of VM and VCC max operating currents, 50 kHz PWM, no load · p. 6
Takes asleep
10 nA · VM sleep current typical, VM = 5 V, VCC = 0 V, all inputs 0 V · p. 6
Gives
1.5 A · H-bridge output current max per channel; power dissipation and thermal limits apply · p. 5
Current limit
1.6 A · Overcurrent protection trip level min · p. 6
Junction to air (DSS (WSON))
50.4 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to board (DSS (WSON))
19.9 K/W · Junction-to-board thermal resistance · p. 5
Junction to case (DSS (WSON))
58 K/W · Junction-to-case (top) thermal resistance · p. 5

What it is and has

5
Motor driver
Dual H-bridge · p. 1
Parallel operation
3-A drive current · p. 1
Control interface
PWM or PHASE/ENABLE · p. 1
Package
12-pin WSON, 2.00 mm × 3.00 mm · p. 1
Protection
Undervoltage, overcurrent, overtemperature · p. 10

Around it

1
cap 0.1-μF (minimum)
between VM and GND; Ceramic bypass capacitor. · p. 4

Specifications

37
ParameterConditionsAs printedPage
Power supply voltage, VMmin -0.3 · max 12 V5
Power supply voltage, VCCmin -0.3 · max 7 V5
Digital input pin voltageMaximum: VCC + 0.5 Vmin -0.5 V5
Continuous motor drive output current per H-bridgePower dissipation and thermal limits must be observed.min -1.5 · max 1.5 A5
Operating junction temperature TJmin -40 · max 150 °C5
Storage temperature Tstgmin -60 · max 150 °C5
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 Vmax 2000 V5
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; ±1500 Vmax 1500 V5
Device power supply voltage VCCTA = 25°Cmin 2 · max 7 V5
Motor power supply voltage VMTA = 25°Cmin 0 · max 11 V5
Logic level input voltage VINTA = 25°C; maximum VCCmin 0 V5
H-bridge output current IOUTTA = 25°C; power dissipation and thermal limits must be observedmin 0 · max 1.5 A5
Externally applied PWM frequency ƒPWMTA = 25°Cmin 0 · max 250 kHz5
Junction-to-ambient thermal resistance RθJADRV8835, DSS (WSON), 12 PINStyp 50.4 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)DRV8835, DSS (WSON), 12 PINStyp 58 °C/W5
Junction-to-board thermal resistance RθJBDRV8835, DSS (WSON), 12 PINStyp 19.9 °C/W5
Junction-to-top characterization parameter ψJTDRV8835, DSS (WSON), 12 PINStyp 0.9 °C/W5
Junction-to-board characterization parameter ψJBDRV8835, DSS (WSON), 12 PINStyp 20 °C/W5
Junction-to-case (bottom) thermal resistance RθJC(bot)DRV8835, DSS (WSON), 12 PINStyp 6.9 °C/W5
VM operating supply current IVMTA = 25°C, VM = 5 V, VCC = 3 V; No PWM, no loadtyp 85 · max 200 uA6
VM operating supply current IVMTA = 25°C, VM = 5 V, VCC = 3 V; 50 kHz PWM, no loadtyp 650 · max 2000 uA6
VM sleep mode supply current IVMQTA = 25°C; VM = 2 V, VCC = 0 V, all inputs 0 Vtyp 5 nA6
VM sleep mode supply current IVMQTA = 25°C; VM = 5 V, VCC = 0 V, all inputs 0 Vtyp 10 · max 95 nA6
VCC operating supply current IVCCTA = 25°C, VM = 5 V, VCC = 3 Vtyp 450 · max 2000 uA6
VCC undervoltage lockout voltage VUVLOTA = 25°C, VM = 5 V; VCC risingmax 2 V6
VCC undervoltage lockout voltage VUVLOTA = 25°C, VM = 5 V; VCC fallingmax 1.9 V6
Input low current IILTA = 25°C, VM = 5 V, VCC = 3 V; VIN = 0min -5 · max 5 uA6
Input high current IIHTA = 25°C, VM = 5 V, VCC = 3 V; VIN = 3.3 Vmax 50 uA6
Pulldown resistance RPDTA = 25°C, VM = 5 V, VCC = 3 Vtyp 100 kΩ6
HS + LS FET on resistance RDS(ON)TA = 25°C; VCC = 3 V, VM = 3 V, I O = 800 mA, TJ = 25°Ctyp 370 · max 420 mΩ6
HS + LS FET on resistance RDS(ON)TA = 25°C; VCC = 5 V, VM = 5 V, I O = 800 mA, TJ = 25°Ctyp 305 · max 355 mΩ6
OFF-state leakage current IOFFTA = 25°C, VM = 5 V, VCC = 3 V; ±200 nAmax 200 nA6
Overcurrent protection trip level IOCPTA = 25°C, VM = 5 V, VCC = 3 Vmin 1.6 · max 3.5 A6
Overcurrent de-glitch time tDEGTA = 25°C, VM = 5 V, VCC = 3 Vtyp 1 us6
Overcurrent protection retry time tOCRTA = 25°C, VM = 5 V, VCC = 3 Vtyp 1 ms6
Output dead time tDEADTA = 25°C, VM = 5 V, VCC = 3 Vtyp 100 ns6
Thermal shutdown temperature tTSDTA = 25°C, VM = 5 V, VCC = 3 V; Die temperaturemin 150 · typ 160 · max 180 °C6

Pins, by the datasheet

13
1 VM
Motor supply; bypass to GND with a 0.1-uF minimum ceramic capacitor. · p. 4
2 AOUT1
Bridge A output 1; connect to motor winding A. · p. 4
3 AOUT2
Bridge A output 2; connect to motor winding A. · p. 4
4 BOUT1
Bridge B output 1; connect to motor winding B. · p. 4
5 BOUT2
Bridge B output 2; connect to motor winding B. · p. 4
6 GND
Device ground. · p. 4
7 BIN2/BENBL
Bridge B input 2/ENABLE input; high sets BOUT2 high in IN/IN mode or enables H-bridge B in PH/EN mode; internal pulldown. · p. 4
8 BIN1/BPHASE
Bridge B input 1/PHASE input; high sets BOUT1 high in IN/IN mode or sets H-bridge B direction in PH/EN mode; internal pulldown. · p. 4
9 AIN2/AENBL
Bridge A input 2/ENABLE input; high sets AOUT2 high in IN/IN mode or enables H-bridge A in PH/EN mode; internal pulldown. · p. 4
10 AIN1/APHASE
Bridge A input 1/PHASE input; high sets AOUT1 high in IN/IN mode or sets H-bridge A direction in PH/EN mode; internal pulldown. · p. 4
11 MODE
Input mode select; low selects IN/IN mode, high selects PH/EN mode; internal pulldown. · p. 4
12 VCC
Device supply; bypass to GND with a 0.1-uF minimum ceramic capacitor. · p. 4
Thermal pad GND
Device ground; solder to the PCB ground plane with thermal vias to dissipate heat. · p. 4

Ordering codes, by the datasheet

1
DRV8835DSSR
DSS (WSON), 12 pins · Package quantity 3000; operating temperature -40 to 85 °C. · p. 18

Open-source boards using it

44See all 44
  • 2 layers60 × 75 mmMakennbot, the printed circuit board in 3D

    Makennbot

    idlehandsdev/makennbot

    A neural network bot for Make

    63 parts175
  • 2 layers43 × 34.3 mmEspway, the printed circuit board in 3D

    Espway

    espway/espway

    Segway-like robot implemented on ESP8266

    37 parts122LGPL-3.0
  • 2 layers156.6 × 125.2 mmAutoFeeder, the printed circuit board in 3D

    AutoFeeder

    ErichStyger/McuOpenPnP_Machine

    Repository for the McuOnEclipse OpenPnP machine

    58 parts69
  • 2 layers42 × 48 mmKERISE, the printed circuit board in 3D

    KERISE

    kerikun11/micromouse-kerise-v3

    MicroMouse KERISE v3

    130 parts32
  • 2 layers75.1 × 85.2 mmMicromouse2016, the printed circuit board in 3D

    Micromouse2016

    idt12312/MIZUHO

    マイクロマウス2016の機体データ

    106 parts28
  • 2 layers94 × 85 mmSumoBot, the printed circuit board in 3D

    SumoBot

    ErichStyger/McuMiniSumoRobot

    Mini Sumo Robot

    86 parts25
  • 2 layers24.8 × 32.4 mmH Bridge Proto, the printed circuit board in 3D

    H Bridge Proto

    Scavenger18/RepoPNP

    Files concering PAIND PNP Feeder

    14 parts24
  • 2 layers127 × 82.6 mmPacBot 2019-2020, the printed circuit board in 3D

    PacBot 2019-2020

    HarvardURC/Pacbot

    Repository for the Harvard Undergraduate Robotics Club's Pacbot team

    20 parts20

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the DRV8835DSS?

Yes. The symbol is EasyEDA_Cloud:DRV8835DSSR and the footprint EasyEDA_Cloud:WSON-12_L3.0-W2.0-P0.50-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DRV8835DSS?

WSON-12-EP(2x3), with 13 pins. Its footprint is drawn on this page.

Where is the DRV8835DSS datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the DRV8835DSS?

JLCPCB lists it as part C129328, with 0 in stock; the sellers' links on this page open their listings.

What can replace the DRV8835DSS?

Parts like it in the library: the DRV8839DSS by Texas Instruments, the HT8835ARDZ by HTCSEMI and the DRV8836DSS by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DRV8835DSS?

44 boards in 38 repositories on GitHub; the most starred are listed on this page, with their KiCad files.