4 layers158.5 × 99.9 mm
4 layers144.8 × 99.9 mm
OSC Mixer Board
N7IFC/ODR-1_Hardware1Hardware files for ODR-1 Radio
- Size
- 144.8 × 99.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 527
- Nets
- 191
- Pads
- 1,053
- Tracks, vias
- 1,450, 229
- Pours
- 23
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 1 Aug 2015
- Updated
- 14 Jan 2018
Overview
OSC Mixer Board is an open-source printed circuit board by N7IFC, from the N7IFC/ODR-1_Hardware repository on GitHub. It is a 4-layer board of 144.8 × 99.9 mm with 527 parts on 191 nets, routed with 1,450 tracks and 229 vias.
It is built around the TLV2462CD, FST3253M and FST3257M, with the LT6231, NC7SZ74K8X and MPZ2012S101AT000 among its other parts. Its parts include 120 capacitors, 53 resistors, 43 inductors, 15 ICs and 8 diodes. It belongs with the audio and music boards of this library.
Main components
9
TLV2462CD
SOIC-8-1.35V~1.35V -40℃~+125℃ 1.6V/us 11nV/√Hz@1kHz 1mA 2 2.7V~9V 2mV 2uV/℃ 50mA 6.4MHz 75nA 7nA 85dB Enable/shutdown function Rail-to-Rail Input, Rail-to-Rail Output SOP-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
FST3253M
SOIC-16-40℃~+85℃ 4V~5.5V Multiplexer/Demultiplexer Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSonsemiSignal Switches, Multiplexers, DecodersFST3257M
SOIC-16-40℃~+85℃ 0.25ns@5.5V,50pF 3V~5.5V 3uA Output enable high-impedance、Tri-state output Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSonsemiSignal Switches, Multiplexers, DecodersLT6231
SOIC-8_L4.9-W3.9-P1.27-LS6.0-BLSOIC-8 New Arrivals ROHSAnalog DevicesUncategorised
NC7SZ74K8X
US-8-40℃~+85℃ 1 1 1.65V~5.5V 1uA 200MHz 32mA 32mA 3pF 5ns@5V,50pF 7SZ Series Complementary D-Type Rising Edge Set and Reset US-8 Flip Flops ROHSonsemiFlip Flops
MPZ2012S101AT000
0805-55℃~+125℃ 1 100Ω@100MHz 20mΩ 4A ±25% 0805 Ferrite Beads ROHSTDKFerrite Beads
BFU520AR
SOT-23(TO-236AB)-40℃~+150℃ 1 NPN 10GHz 12V 1nA 30mA 3V 450mW 60 NPN SOT-23(TO-236AB) Bipolar (BJT) ROHSNXP SemiconductorsBipolar (BJT)DMP4015SSSQ
SO-8-55℃~+150℃ 1 P-Channel 1.036nF 1.82W 10.1A 2V 4.234nF 40V 47.5nC@5V 526pF 7mΩ@10V SO-8 MOSFETs ROHSDiodes IncorporatedMOSFETs
ETC1-1T-2TR
SMD-5P-40℃~+85℃ 0.5dB 1.5dB 100kHz~200MHz 1:1 2.79mm 3.81mm 3.81mm 5° SMD-5P Balun ROHSMACOMBalun
Parts
527| Qty | Value | Footprint | References |
|---|---|---|---|
| 261 | x | ViaGNDA40 | x, x, x, x, x, x, x, x, x, x, x, x, x, x, x, x +245 |
| 32 | 0.1uF | SM0805-1 | C1, C2, C5, C10, C11, C12, C13, C54, C56, C59, C60, C101, C104, C107, C108, C111 +16 |
| 16 | 0.033uF | SM0805-1 | C57, C58, C83, C85, C86, C87, C88, C95, C100, C114, C115, C116, C117, C118, C119, C120 |
| 9 | 240pF | SM0805-1 | C26, C34, C38, C103, C106, C109, C110, C112, C113 |
| 9 | 30.1 | SM0805-1 | R7, R31, R34, R38, R41, R42, R45, R48, R51 |
| 8 | 1N4148 | SOD123 | D3, D4, D5, D6, D7, D8, D9, D10 |
| 8 | 47uH | SM1210 | L36, L37, L38, L39, L40, L41, L42, L43 |
| 6 | 9.31K | SM0805-1 | R28, R32, R33, R35, R39, R40 |
| 6 | FM-12 | SIL-12-1 | J2, J3, J4, J5, J6, J7 |
| 6 | FST3253 | SO16S | U2, U3, U4, U5, U7, U8 |
| 5 | 470pF | SM0805-1 | C36, C93, C94, C98, C99 |
| 4 | 0.022uF | SM0805-1 | C91, C92, C96, C97 |
| 4 | 0.056uH | SM1210 | L30, L31, L32, L33 |
| 4 | 100 | SM0805-1 | R44, R47, R50, R53 |
| 4 | 1100pF | SM0805-1 | C45, C47, C49, C53 |
| 4 | 150pF | SM0805-1 | C14, C18, C20, C22 |
| 4 | 3.01K | SM0805-1 | R43, R46, R49, R52 |
| 4 | 620pF | SM0805-1 | C40, C42, C44, C48 |
| 4 | 97.6 | SM0805-1 | R24, R25, R26, R27 |
| 4 | MPZ2012S331A | SM0805-1 | FB3, FB4, FB5, FB6 |
| 3 | 0.01uF | SM0805-1 | C66, C69, C73 |
| 3 | 0.22uH | SM1210 | L3, L4, L5 |
| 3 | 0.56uH | SM1210 | L6, L7, L8 |
| 3 | 0.82uH | SM1210 | L9, L10, L11 |
| 3 | 1.00K | SM0805-1 | R12, R20, R21 |
| 3 | 1.2uH | SM1210 | L12, L13, L14 |
| 3 | 1.8uH | SM1210 | L15, L16, L17 |
| 3 | 2.7uH | SM1210 | L18, L19, L20 |
| 3 | 3.9uH | SM1210 | L21, L22, L23 |
| 3 | 300pF | SM0805-1 | C16, C30, C32 |
| 3 | 360pF | SM0805-1 | C31, C39, C43 |
| 3 | 39uF | CAP_8.3X8.3 | C3, C4, C6 |
| 3 | 4.7uF | SM0805-1 | C55, C72, C74 |
| 3 | 8.2uH | SM1210 | L24, L25, L26 |
| 3 | FST3257 | SO16S | U14, U15, U18 |
| 2 | 0.033uH | SM1210 | L29, L35 |
| 2 | 0.33uF | SM0805-1 | C65, C70 |
| 2 | 1.50K | SM0805-1 | R29, R36 |
| 2 | 10.0 | SM0805-1 | R18, R19 |
| 2 | 100pF | SM0805-1 | C79, C80 |
| 2 | 120pF | SM0805-1 | C19, C23 |
| 2 | 130pF | SM0805-1 | C24, C28 |
| 2 | 147 | SM0805-1 | R6, R8 |
| 2 | 17.4 | SM0805-1 | R22, R23 |
| 2 | 18.7K | SM0805-1 | R30, R37 |
| 2 | 180pF | SM0805-1 | C29, C33 |
| 2 | 2000pF | SM0805-1 | C50, C52 |
| 2 | 200pF | SM0805-1 | C25, C27 |
| 2 | 2400pF | SM0805-1 | C102, C105 |
| 2 | 270uF | CAP_8.3X8.3 | C7, C84 |
| 2 | 33uH | SM1210 | L27, L34 |
| 2 | 4.75K | SM0805-1 | R1, R2 |
| 2 | 430pF | SM0805-1 | C35, C37 |
| 2 | 52.3 | SM0805-1 | R9, R11 |
| 2 | 56pF | SM0805-1 | C15, C17 |
| 2 | LT6231 | SO8N-1 | U19, U20 |
| 2 | MPZ2012S101AT000 | SM0805-1 | FB1, FB2 |
| 2 | NC7SZ74 | US8 | U12, U13 |
| 2 | TLV2462CD | SO8N-1 | U16, U17 |
| 1 | 0.082uH | SM1210 | L1 |
| 1 | 0.10uH | SM1210 | L28 |
| 1 | 0.150uH | SM1210 | L2 |
| 1 | 10.0K | SM0805-1 | R3 |
| 1 | 1300pF | SM0805-1 | C46 |
| 1 | 1uF | SM0805-1 | C8 |
| 1 | 2.21 | SM0805-1 | R15 |
| 1 | 2.61K | SM0805-1 | R5 |
| 1 | 2200pF | SM0805-1 | C51 |
| 1 | 220pF | SM0805-1 | C21 |
| 1 | 25 MHz | CRYSTAL_4 | X1 |
| 1 | 3.74K | SM0805-1 | R13 |
| 1 | 332 | SM0805-1 | R10 |
| 1 | 374 | SM0805-1 | R14 |
| 1 | 4.64K | SM0805-1 | R4 |
| 1 | 470 | SM0805-1 | R17 |
| 1 | 68.1 | SM0805-1 | R16 |
| 1 | 750pF | SM0805-1 | C41 |
| 1 | BFU520A | SOT23 | Q3 |
| 1 | DMP4015SSSQ | SO8N-1 | Q2 |
| 1 | ETC1-1T-2TR | SM-22 | T1 |
The 516 most common of 527 parts.
More from N7IFC/ODR-1_Hardware
2- 2 layers93.6 × 48.9 mm
Similar boards
- 2 layers164 × 100 mm
- 2 layers100.1 × 100.5 mm
SDR Reciever
greenjacketgirl/SDR_Receiver
This project is an attempt at designing and building a Software Defined Radio receiver that has the capabilities of listening to frequencies ranging from 500kHz to 50MHz utlizing the board designed, a sound card, and…
176 parts8 - 2 layers79.8 × 23.9 mm
- 2 layers99.6 × 99.7 mm
Complete Schematic V5
JoshuaMularczyk/Software_Defined_Radio_Receiver
This project was taken on with the goal to create a Software Defined Radio (SDR) in coolaboration with my partner Christian Williams.
74 parts1MIT - 2 layers90.5 × 104.4 mm
RP spectroscopy
SimoneDamian/RP_Spectroscopy_kicad
Circuits for the hardware part of the project
96 parts - 2 layers30 × 30 mm
ReCamera Gimbal
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
123 parts495Apache-2.0 - 4 layers56 × 60 mm
PCBA KNOT
intechstudio/knot
Knot is the bridge between old-school MIDI gear like synthesizers, groove boxes, guitar pedals and neat USB MIDI devices.
111 parts58GPL-3.0 - 4 layers95.9 × 90.2 mm
Baikal be t100
chipiki/baikal_be-t1000
OpenHardware development board for Russian Baikal BE-T1000 MIPS Warrior P-class P5600 processor
381 parts6BSD-3-Clause
Questions
How big is the OSC Mixer Board PCB?
It measures 144.8 × 99.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the OSC Mixer Board use?
527 parts, built around the TLV2462CD, FST3253M, FST3257M and LT6231. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OSC Mixer Board KiCad files?
From the N7IFC/ODR-1_Hardware repository on GitHub, at the commit this page was made from: the board is OSC_Mixer_Board_A1/OSC_Mixer_Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the OSC Mixer Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask N7IFC before reusing the design.