Skip to the content
2 layers36.1 × 23.9 mmMinicharge, the printed circuit board in 3D

Мини зарядное устройство для литиевых аккумуляторов ток до 600мА

Size
36.1 × 23.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
14
Pads
65
Tracks, vias
81, 0
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
25 Jan 2020
Updated
18 Dec 2020

Overview

Minicharge is an open-source printed circuit board by myowndevice, from the myowndevice/minicharge repository on GitHub. It is a 2-layer board of 36.1 × 23.9 mm with 22 parts on 14 nets, routed with 81 tracks and 0 vias.

It is built around the TP4056, IRLML6402 and IRLML2502. Its parts include 8 resistors, 3 capacitors, 3 connectors, 2 diodes and 2 transistors.

Main components

3

README

README.md

Мини зарядное устройство для литиевого аккумулятора

Это мини устройство позволяет зарядить один литиевый аккумулятор от micro USB разъёма. Несложная пайка. Позволяет познакомиться с основами микроэлектроники, научиться паять SMD компоненты. Это устройство принесёт вам большую пользу как дома, так и в приборостроении. С его помощью можно восстановить аккумулятор «ушедший» в глубокий разряд, зарядить запасной аккумулятор сотового телефона, зарядить аккумуляторы таблетки LIR2030 и аналогичные, а также любой аккумулятор в широко распространнёном размере 18650 или любом другом.

Основные параметры:

  • Ток заряда — 40мА, 120мА, 600мА
  • Компактный размер
  • Работа с любыми аккумуляторами типа Li-pol, Li-ion (напряжение заряда 4.2В)
  • Питание по проводу microusb от компьютера или любого зарядного устройства телефона
  • Защита от переплюсовки аккумулятора
  • Светодиодный индикатор окончания заряда

Данный репозитарий содержит все необходимые файлы для изготовления зарядного устройства.Если вы будете скачивать файлы через web не забудьте скачать общую папку Kicadlib.

Ознакомится со схемой и подробным описанием мини зарядного устройства и порядка сборки можно, прочитав эту подробную статью

Также здесь вы найдете подробное описание как сделать другие приборы, много теории о том, как их делать, методику изготовления печатных плат и много другого.

Изучай микроконтроллеры, делай платы дома, разрабатывай электронику сам!

Parts

22
QtyValueFootprintReferences
3Jumper_NO_SmallPin_Headers:Pin_Header_Angled_1x02_Pitch2.54mmJP1, JP2, JP3
2100kResistors_SMD:R_0603_HandSolderingR7, R8
210uCapacitors_SMD:C_0805_HandSolderingC1, C2
21kResistors_SMD:R_0603_HandSolderingR5, R6
2LEDLEDs:LED_0603_HandSolderingD1, D2
10R5Resistors_SMD:R_1206_HandSolderingR4
1100nCapacitors_SMD:C_0603_HandSolderingC3
110kResistors_SMD:R_0603_HandSolderingR2
12kResistors_SMD:R_0603_HandSolderingR3
130kResistors_SMD:R_0603_HandSolderingR1
1BATPin_Headers:Pin_Header_Angled_1x02_Pitch2.54mmJ3
1BAT2Pin_Headers:Pin_Header_Angled_1x02_Pitch2.54mmJ2
1IRLML6402TO_SOT_Packages_SMD:SOT-23Q1
1TP4056Housings_SOIC:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mmU1
1USB_OTGmyowndevice:usb5s_flipJ1
1irlml2502TO_SOT_Packages_SMD:SOT-23Q2

Similar boards

  • 4 layers60 × 28 mmRailLink, the printed circuit board in 3D

    RailLink

    Misaka0x2730/RailLink

    Compact isolated version of J-Link v9.

    83 parts134
  • 2 layers92.5 × 82.8 mmRifle and sensors, the printed circuit board in 3D

    Rifle and sensors

    DAlexis/caustic-lasertag-system

    Caustic project is a full-featured indoor and outdoor lasertag system

    268 parts16
  • 4 layers122.2 × 115.1 mmScan controller kicad, the printed circuit board in 3D

    Scan controller kicad

    fwachsmuth/Filmkorn-Raw-Scanner

    The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG

    170 parts13MIT
  • 2 layers68 × 81.5 mmController, the printed circuit board in 3D

    Controller

    orlopau/coffee-scale

    Scale for espresso and filter coffee.

    55 parts11
  • 2 layers87.3 × 53.3 mmJulis, the printed circuit board in 3D

    Julis

    Misaka0x2730/Julis

    Expansion test board of ARM Debugger for NUCLEO-F746ZG.

    135 parts2MIT
  • 4 layers95 × 60 mmRubyLink revA, the printed circuit board in 3D

    RubyLink revA

    Misaka0x2730/RubyLink

    Hardware platform for Miyako-Link based on RP2040

    219 parts2
  • 2 layers195.6 × 113 mmHVA, the printed circuit board in 3D

    HVA

    blue-wind-25/JxMake

    JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

    228 parts
  • 2 layers52 × 66.5 mmRP2040-MiniPill Breakout Board, the printed circuit board in 3D

    RP2040-MiniPill Breakout Board

    dokuhn/RP2040-MiniPill-Breakout-Board

    This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].

    27 parts

Questions

How big is the Minicharge PCB?

It measures 36.1 × 23.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Minicharge use?

22 parts, built around the TP4056, IRLML6402 and IRLML2502. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Minicharge KiCad files?

From the myowndevice/minicharge repository on GitHub, at the commit this page was made from: the board is kicad/minicharge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Minicharge design in my own project?

Its repository states no licence, so its author keeps all rights: ask myowndevice before reusing the design.