2 layers130.2 × 101 mm
ASV
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
184 parts
2 layers195.6 × 113 mm
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
- Size
- 195.6 × 113 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 228
- Nets
- 223
- Pads
- 713
- Tracks, vias
- 1,831, 282
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Apr 2026
- Updated
- 1 Nov 2026
Overview
HVA is an open-source printed circuit board by blue-wind-25, from the blue-wind-25/JxMake repository on GitHub. It is a 2-layer board of 195.6 × 113 mm with 228 parts on 223 nets, routed with 1,831 tracks and 282 vias.
It is built around the ATMEGA1284P-PU, LMV358 and LT1054CP, with the MT3608, BSS138 and SS14 among its other parts. Its parts include 101 resistors, 25 diodes, 21 capacitors, 11 transistors and 7 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
10
ATMEGA1284P-PU
PDIP-40-40℃~+85℃ 1.8V~5.5V 10bit 128KB 16KB 20MHz 32 4KB 8 Bit AVR Built-in FLASH PDIP-40 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LMV358
SOP-8-40℃~+125℃ 10pA 10pA 1MHz 2 2.5V~5.5V 20mA 20nV/√Hz@10kHz 2uV/℃ 40uA 5mV 600V/ms 65dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOP-8 Operational Amplifier ROHSTECH PUBLICOperational Amplifier
LT1054CP
PDIP-8-5V 0℃~+70℃ 100mA 10Ω 2.5mA 25kHz 3.5V~15V Inverted Low-power standby、Adaptive switching frequency PDIP-8 Charge Pumps ROHSTexas InstrumentsDC-DC Converters
MT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC Converters
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
BAT85
DO-341 Independent 200mA 2uA@25V 30V 5A 800mV@100mA DO-34 Schottky Diodes ROHSNexperiaSchottky DiodesIRLML2502
SOT-23-40℃~+150℃ 1 N-channel 1.25W 20V 4.2A 50mΩ@2.5V 600mV 66pF 740pF 8nC@10V SOT-23 MOSFETs ROHSGuangdong HottechMOSFETsIRLML6402
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 110pF 12nC 145pF 20V 3.7A 400mV 633pF 65mΩ@4.5V P-Channel SOT-23 MOSFETs ROHSGuangdong HottechMOSFETsSMA6J12A
SMASMA ESD and Surge Protection (TVS/ESD) ROHSMDDUncategorised
README
README.md
JxMake is primarily licensed under LGPL v3+.
Copies of the licenses for third-party libraries/components included in this repository are located in the 3rd_party_library_licenses directory. Please refer to individual sub-directories of the libraries/components for specific author credits and copyright headers.
JxMake is a Java-based cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
Additionally, JxMake supports several features not typically found in other console-based build systems, including a simple built-in GUI, a serial console, a serial plotter, and integrated programmers for some commonly used MCUs. The JxMake repository also includes hardware schematics and PCB designs ranging from simple to moderately complex, covering generic GPIO, basic programmers, and various tools.
Building JxMake requires Java SDK 8 or later (note that Java SDK 8 is an LTS version).
This project is mirrored on both SourceForge and GitHub:
Please refer to the JxMake usage page (run it with the -h or --browse-docs option) for how to
use the program.
Please refer to docs/*.txt, test/*.jxm, and test/src/*/JxMakeFile for the scripting language
syntax and examples.
All preprocessed *.java files generated from their corresponding *.java.in files (and
optionally some *.java.inc files) are preprocessed using PCPP (3rd_party/tools/pcpp/pcmd.py)
and GNU sed.
Currently, JxMake's loadable libraries (build scripts) are primarily focused on embedded systems development. Future updates will enhance support for building desktop applications. However, please note that these libraries are quite basic, so you may prefer to create custom libraries tailored to your projects.
If you like this software (or part of this software), please consider donating to:
PayPal: aloysius.indrayanto@gmail.com
to support the software development.
Parts
228| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R12, R23, R24, R25, R26, R27, R28, R29, R31, R36, R37, R38, R39, R40, R45 +11 |
| 11 | 1R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R46, R49, R53, R88, R89, R90, R91, R92, R93, R94, R95 |
| 11 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4, D6, D13, D17, D18, D19, D20, D24, D25 |
| 10 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R21, R22, R62, R63, R64, R65, R69, R70, R71 |
| 10 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C8, C9, C10, C13, C14, C15, C16, C19 |
| 9 | BSS138 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q11 |
| 8 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R60, R72, R73, R74, R75, R76, R77 |
| 8 | SS14 | Diode_SMD:D_SMA | D1, D7, D8, D9, D10, D15, D16, D22 |
| 6 | Jumper_2_Small_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP3, JP4, JP5, JP6, JP10, JP11 |
| 5 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R42, R79, R80, R81, R82 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R18, R30, R32, R58 |
| 5 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R20, R66, R67, R68 |
| 5 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5 |
| 4 | Stabilizer | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | JH1, JH2, JS1, JS2 |
| 3 | 15k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R6 |
| 3 | 1k2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R13, R16 |
| 3 | 27k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R11, R34 |
| 3 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R99, R100, R101 |
| 3 | BAT85 | Diode_SMD:D_SMA | D11, D12, D23 |
| 3 | Jumper_2_Small_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP14, JP15, JP16 |
| 2 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C17, C18 |
| 2 | 150R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R59, R97 |
| 2 | 18pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12 |
| 2 | 220R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R43, R44 |
| 2 | 3k3 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R61 |
| 2 | 470R/0.5W | Resistor_SMD:R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R55, R56 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R35 |
| 2 | Jumper_2_Small_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP12, JP13 |
| 2 | Test_VBoost | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1, TP3 |
| 1 | |||
| 1 | 0.25A | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | F1 |
| 1 | 0R/0.5W | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R86 |
| 1 | 100nF/25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-7360-38_Kemet-E_Pad2.25x4.25mm_HandSolder | C7 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-7360-38_Kemet-E_Pad2.25x4.25mm_HandSolder | C6 |
| 1 | 11.0592MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 150k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R57 |
| 1 | 180R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R33 |
| 1 | 1k5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 1uF/25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R41 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 22uF/25V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 22uH/33uH | Inductor_SMD:L_12x12mm_H8mm | L1 |
| 1 | 2V7/0.5W/5% | Diode_SMD:D_MELF_Handsoldering | D5 |
| 1 | 2k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 2k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R51 |
| 1 | 3V3/0.5W/5% (or 3V6) | Diode_SMD:D_MELF_Handsoldering | D14 |
| 1 | 820R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R50 |
| 1 | 9k1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R78 |
| 1 | ATmega1284P-P | Package_DIP:DIP-40_W15.24mm | U5 |
| 1 | AVR-ISP6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Horizontal | J1 |
| 1 | BEAD ~200R @100MHz | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L2 |
| 1 | Bypass_Diode | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP9 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J14 |
| 1 | Conn_02x09 | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical | JB1 |
| 1 | Conn_02x12 | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | JB2 |
| 1 | Conn_02x19 | Connector_PinHeader_2.54mm:PinHeader_2x19_P2.54mm_Vertical | JB3 |
| 1 | DG412xY | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | EN_V- | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP8 |
| 1 | EN_VBoost | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP7 |
| 1 | FTDI | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J2 |
| 1 | IRLML2502 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q10 |
| 1 | IRLML6402 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q9 |
| 1 | ISP/TPI-IN | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J4 |
| 1 | ISP/TPI-OUT | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J6 |
| 1 | Jumper_2_Small_Bridged | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | SB1 |
| 1 | LMV358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LT1054 | Package_DIP:DIP-8_W7.62mm_LongPads | U3 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | PIC-IN | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J3 |
| 1 | PIC-OUT | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J5 |
| 1 | PU/PD | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
| 1 | RST | Button_Switch_SMD:SW_SPST_FSMSM | SW1 |
| 1 | SMA6J12A | Diode_SMD:D_SMA | D21 |
| 1 | Side_02x09_T_B | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical | JX1 |
| 1 | Side_02x12 | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | JX2 |
| 1 | Side_02x19 | Connector_PinHeader_2.54mm:PinHeader_2x19_P2.54mm_Vertical | JX3 |
| 1 | Test_In+ | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP5 |
The 211 most common of 228 parts.
More from blue-wind-25/JxMake
12- 2 layers167.6 × 134.6 mm
VMP
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
170 parts - 2 layers129.5 × 92.7 mm
HVA
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
108 parts - 2 layers77.5 × 79.6 mm
USH
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
104 parts - 2 layers132.1 × 141 mm
VMP
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
101 parts - 2 layers238.8 × 106.7 mm
VMP
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
94 parts - 2 layers94 × 75.7 mm
PSC
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
79 parts - 2 layers66 × 61.1 mm
USH
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
76 parts - 2 layers87.6 × 39.4 mm
ABC
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
53 parts - 2 layers51.4 × 31.8 mm
VM4
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
45 parts - 2 layers76.2 × 61 mm
UGM
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
42 parts - 2 layers62.2 × 41.9 mm
ICS
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
35 parts
Similar boards
- 2 layers213 × 128.5 mm
- 2 layers66 × 81.6 mm
- 2 layers99.4 × 60.2 mm
TeslaBMBCheck
svpetry/TeslaBMBCheck
Simple device that reads the voltage levels and temperatures from a Tesla Model S BMB board.
42 parts1 - 6 layers90 × 90 mm
Cansat
DevKiDCosmo/SATELLITE-EDGE-MODULE
A satellite edge module ready for competition
220 parts2GPL-3.0 - 2 layers96 × 90 mm
- 4 layers100 × 100 mm
AFE
Blaze-Pascal/Masters-Multi-Channel_DAQ
Custom 2-channel digital oscilloscope DAQ with 20MHz bandwidth. Built with a custom KiCad analog front-end (AFE) PCB, Gowin FPGA (Tang Nano 9K) for high-speed signal buffering (VHDL), and an RPi Pico MCU for SCPI-like…
216 parts2GPL-3.0 - 2 layers158 × 34 mm
- 4 layers60 × 28 mm
Questions
How big is the HVA PCB?
It measures 195.6 × 113 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HVA use?
228 parts, built around the ATMEGA1284P-PU, LMV358, LT1054CP and MT3608. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HVA KiCad files?
From the blue-wind-25/JxMake repository on GitHub, at the commit this page was made from: the board is hardware/JxMake_USB_GPIO_II/KiCad8/High_Voltage_Attachment_II/HVA.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HVA design in my own project?
Its repository states no licence, so its author keeps all rights: ask blue-wind-25 before reusing the design.