4 layers254.9 × 150.1 mm
4 layers155 × 69.8 mm
Displayunit
muccc/WomoLIN84Open Source Steuerung von LIN Bus Geräten im Caravan Bereich.
- Size
- 155 × 69.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 143
- Nets
- 202
- Pads
- 683
- Tracks, vias
- 6,977, 476
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Oct 2018
- Updated
- 22 Mar 2021
Overview
Displayunit is an open-source printed circuit board by muccc, from the muccc/WomoLIN repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 155 × 69.8 mm with 143 parts on 202 nets, routed with 6,977 tracks and 476 vias.
It is built around the HD588E, SN65HVD234D and AT25SF161-SHD-T, with the MX25LM51245GXDI00, TPS61165DRVR and TSC2007IPW among its other parts. Its parts include 62 capacitors, 25 resistors, 12 ICs, 11 connectors and 8 diodes. It belongs with the STM32 boards of this library.
Main components
12
HD588E
SOP-8-40℃~+125℃ 1 1 1Mbps 256 5V 600uA Half-Duplex Transceiver ±16kV SOP-8 RS-485 / RS-422 ICs ROHSBroadicRS-485 / RS-422 ICs
SN65HVD234D
SOIC-8-40℃~+125℃ 1 1Mbps 3V~3.6V 50nA 6mA CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
AT25SF161-SHD-T
SOIC-8-208mil100,000 cycles 104MHz 10uA 16Mbit 2.5V~3.6V 20 Years 700us 70ms@(4KB) SPI SOIC-8-208mil NOR FLASH ROHSRenesas ElectronicsNOR FLASH
MX25LM51245GXDI00
CSPBGA-24(6x8)-40℃~+85℃ 100,000 cycles 133MHz 150us 2.7V~3.6V 20 Years 512Mbit SPI CSPBGA-24(6x8) NOR FLASH ROHSMXICNOR FLASH
TPS61165DRVR
WSON-6-EP(2x2)-40℃~+85℃ 1 1.2A 1.2MHz 2% 3V~18V 3V~38V Boost Built-in DC-DC PWM WSON-6-EP(2x2) LED Drivers ROHSTexas InstrumentsLED Drivers
TSC2007IPW
TSSOP-16-40℃~+85℃ 1.2V~3.6V 12 32.24uA 4-Wire Resistive Built-in temperature sensor External I2C TSSOP-16 Touch Screen Controllers ROHSTexas InstrumentsTouch Screen Controllers
24AA02E48T-I/OT
SOT-23-5-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 200 Years 2Kbit 400kHz 5ms I2C SOT-23-5 EEPROM ROHSMicrochip TechnologyEEPROM
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
B260A-13-F-HXY
SMASMA Schottky Diodes ROHSHXY MOSFETSchottky Diodes
NUP2105L
SOT-23-55℃~+150℃ 100nA 2 24V 30pF 32V 350W@8/20us 44V 8A@8/20us Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS SOT-23 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)Q13FC1350000400
SMD3215-2PSMD3215-2P Crystals ROHSSeiko EpsonCrystals
X322516MLB4SI
SMD3225-4P-40℃~+85℃ 16MHz 50Ω 9pF Crystal Oscillator ±10ppm ±20ppm SMD3225-4P Crystals ROHSYXCCrystals
README
README.mduse: git clone https://github.com/muccc/WomoLIN.git
WomoLIN Hardware und sonstige Infos zum Projekt
Neue Wege in der konfigurierbaren Software Entwicklung eines Community Projektes
Alle Infos findet Ihr in unserem Wiki hier auf Github.
https://github.com/muccc/WomoLIN/wiki/Home
WomoLIN Meilensteine und Projektfortschritt
18.Okt 2020 : 100. Mitglied in unserer Telegramgruppe
10.Aug 2020 : Inbetriebnahme Controlboard 2.0.
10.Juli 2020 : Controlboard 2.0.
10.Juni 2020 : Beginn Einbau Controlboard in Womo von Jan.
15.Mai 2020 : Erstes Displayboard Kleinserie.
11.Apr 2020 : Erste Inbetriebnahme Display Unit mit Display.
19.Mrz 2020 : Die ersten Hardware für die Display Unit ist angekommen.
16.Dez. bis 30.Dez.2019 : 36th Chaos Communication Congress in Leipzig, Jan stellt die Hardware vor.
10.Dez 2019 : Die ersten Leiterplatten der Main Unit / Controlboard sind angekommen.
03.Dez 2019 : Der Schaltplan der Main Unit ist fertig gestellt.
10.Aug 2020 : Inbetriebnahme Controlboard 2.0.
10.Juli 2020 : Controlboard 2.0.
10.Juni 2020 : Beginn Einbau Controlboard in Womo von Jan.
15.Mai 2020 : Erstes Displayboard Kleinserie.
11.Apr 2020 : Erste Inbetriebnahme Display Unit mit Display.
19.Mrz 2020 : Die ersten Hardware für die Display Unit ist angekommen.
16.Dez. bis 30.Dez.2019 : 36th Chaos Communication Congress in Leipzig, Jan stellt die Hardware vor.
10.Dez 2019 : Die ersten Leiterplatten der Main Unit / Controlboard sind angekommen.
03.Dez 2019 : Der Schaltplan der Main Unit ist fertig gestellt.
Parts
143| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C10, C11, C12, C13, C14, C18, C19, C25, C27, C28, C30, C34, C36, C40, C41 +15 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R13, R15, R17 |
| 6 | 100R | Inductor_SMD:L_0603_1608Metric | FB1, FB2, FB3, FB4, FB11, FB12 |
| 6 | 1u | Capacitor_SMD:C_1206_3216Metric | C1, C22, C26, C31, C37, C55 |
| 5 | 100r | Inductor_SMD:L_0603_1608Metric | FB5, FB6, FB7, FB8, FB9 |
| 5 | B260A-13-F | Diode_SMD:D_SMB | D2, D3, D4, D6, D7 |
| 4 | 0R | Resistor_SMD:R_0603_1608Metric | R6, R23, R24, R25 |
| 4 | 10n | Capacitor_SMD:C_0603_1608Metric | C16, C29, C38, C39 |
| 4 | 6p8 | Capacitor_SMD:C_0603_1608Metric | C3, C4, C57, C58 |
| 3 | 10uH | Womo-Lin:MWSA0503 | L1, L3, L4 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric | C15, C17 |
| 2 | 10u | Capacitor_SMD:C_1210_3225Metric | C46, C49 |
| 2 | 120R | Resistor_SMD:R_0603_1608Metric | R18, R26 |
| 2 | 22u | Capacitor_SMD:C_1210_3225Metric | C42, C44 |
| 2 | 2n7 | Capacitor_SMD:C_0603_1608Metric | C64, C65 |
| 2 | 2u2 | Capacitor_SMD:C_1210_3225Metric | C32, C33 |
| 2 | 31k6 | Resistor_SMD:R_0603_1608Metric | R14, R16 |
| 2 | 332k | Resistor_SMD:R_0603_1608Metric | R7, R9 |
| 2 | 3p3 | Capacitor_SMD:C_0603_1608Metric | C23, C24 |
| 2 | 615008138221 | Womo-Lin:615008138221 | J1, J2 |
| 2 | 76K8 | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | 90k9 | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | Conn_02x03_Odd_Even | Connector_Molex:Molex_Micro-Fit_3.0_43045-0612_2x03_P3.00mm_Vertical | J7, J11 |
| 2 | NUP2105L | Package_TO_SOT_SMD:SOT-23 | D5, D8 |
| 2 | SW_DIP_x01 | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW3, SW4 |
| 2 | TPS54160DGQR | Womo-Lin:SOP50P490X110-11N | U4, U5 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 1R1 | Resistor_SMD:R_1206_3216Metric | R10 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 1u | Capacitor_SMD:C_1210_3225Metric | C47 |
| 1 | 220n | Capacitor_SMD:C_0603_1608Metric | C43 |
| 1 | 24AA02E48T-I/OT | Package_TO_SOT_SMD:SOT-23-5 | U8 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 2u2 | Capacitor_SMD:C_1206_3216Metric | C21 |
| 1 | 2uH2 | Womo-Lin:MWSA0603 | L2 |
| 1 | 4u7 | Capacitor_SMD:C_1210_3225Metric | C35 |
| 1 | 52271-0679 | Womo-Lin:52271-0679 | J5 |
| 1 | 54104-4031 | Womo-Lin:54104-4031 | J3 |
| 1 | 61k9 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | AT25SF161-SHD-T | Package_SO:SO-8_5.3x6.2mm_P1.27mm | U7 |
| 1 | BLM18PG121SN1D | Inductor_SMD:L_0603_1608Metric | FB10 |
| 1 | Battery_Cell | Womo-Lin:QJ.BS-6 | BT1 |
| 1 | Boot | Womo-Lin:TS-1187A | SW1 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J9 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J6 |
| 1 | Conn_ARM_JTAG_SWD_20 | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J4 |
| 1 | ER-CON10HT-1 | Womo-Lin:ER-CON10HT-1 | J10 |
| 1 | HD588E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | IS66WVH8M8BLL-100B1LI_0 | Womo-Lin:BGA24C100P5X5_600X800X35 | IC3 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | MX25LM51245GXDI00 | Womo-Lin:BGA24C100P5X5_600X800X35 | IC2 |
| 1 | PFUF.150.2 30V 1.5A | Fuse:Fuse_1210_3225Metric | F1 |
| 1 | Q13FC1350000400 | Crystal:Crystal_SMD_MicroCrystal_CC7V-T1A-2Pin_3.2x1.5mm | Y2 |
| 1 | Reset | Womo-Lin:TS-1187A | SW2 |
| 1 | SN65HVD234 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | STM32L4R9ZITx | Package_QFP:LQFP-144_20x20mm_P0.5mm | U1 |
| 1 | TPS61165DRVR | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | IC4 |
| 1 | TSC2007 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | IC1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J8 |
| 1 | X322516MLB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
Questions
How big is the Displayunit PCB?
It measures 155 × 69.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Displayunit use?
143 parts, built around the HD588E, SN65HVD234D, AT25SF161-SHD-T and MX25LM51245GXDI00. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Displayunit KiCad files?
From the muccc/WomoLIN repository on GitHub, at the commit this page was made from: the board is Hardware/Displayunit/Displayunit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Displayunit design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from muccc/WomoLIN
1Similar boards
- 4 layers
- 4 layers41 × 41 mm
Flight Controller
benwys/SparrowHawk
Open source flight controller for FPV drones. Includes two complete hardware designs (kicad) with production files. Will include custom firmware (bare-metal cpp). In progress :-)
103 partsMIT - 4 layers91.8 × 92 mm
- 6 layers150 × 90 mm
Front panel controller
birdybro/FPGA_Amp
FPGA based audiophile phono preamp and amp integrated unit idea. WIP
115 partsGPL-3.0 - 6 layers567.7 × 328.4 mm
- 2 layers65 × 56 mm
Cmoda7 hat
SR-Madsen/AdvancedProgrammableElectronics
Repository used for storing projects from Vivado for the Advanced Programmable Electronics course on the 3rd semester of the Master in Electronics at the University of Southern Denmark.
42 parts - 2 layers85 × 54.5 mm
Maithoga lcd board 480x320 R61529
voloviq/maithoga_lcd_board_480x320_R61529
PCB Board for Maithoga display with resolution 480x320 based on chip R61529 compatible with ILI9481.
22 parts3 - 2 layers80 × 100 mm
