Skip to the content
1234567

TPS61165DRVR

Texas InstrumentsExtended

-40℃~+85℃ 1 1.2A 1.2MHz 2% 3V~18V 3V~38V Boost Built-in DC-DC PWM WSON-6-EP(2x2) LED Drivers ROHS

Part id
ti/TPS61165DRVR
Category
LED Drivers
Package
WSON-6-EP(2x2)
Pins
6
In stock
9,717 at JLCPCB (C122568)
Used on
3 open-source boards

Overview

The TPS61165DRVR is a LED Driver made by Texas Instruments in a WSON-6-EP(2x2) package with 7 pins. -40℃~+85℃ 1 1.2A 1.2MHz 2% 3V~18V 3V~38V Boost Built-in DC-DC PWM WSON-6-EP(2x2) LED Drivers ROHS.

PCBKit's library has its KiCad symbol (Driver_LED:TPS61165DRV, from KiCad's library) and its footprint (Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm, from KiCad's library), ready for a KiCad board. 9,717 are in stock at JLCPCB (part C122568). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1FB2COMP3GND4SW5CTRL6VIN
Driver_LED:TPS61165DRVFrom KiCad's library

Footprint

1234567
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmFrom KiCad's library

From the datasheet

14
Supply, least
3 V · VIN, recommended operating min · p. 4
Supply, most
18 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
20 V · VIN, absolute maximum · p. 4
Works from
-40 °C · Operating ambient temperature min · p. 4
Works up to
85 °C · Operating ambient temperature max · p. 4
Junction, hottest
150 °C · Operating junction temperature absolute max · p. 4
Takes working
2.3 mA · VIN quiescent current max, PWM switching, no load · p. 5
Takes asleep
1 µA · VIN shutdown current max, CTRL grounded, VIN = 4.2 V · p. 5
Feedback reference
200 mV · Feedback regulation voltage typical · p. 5
Current limit
1.2 A · Switch current limit typical, D = Dmax · p. 5
Switches at
1.2 MHz · Oscillator frequency typical · p. 5
Junction to air (DRV (WSON))
80.7 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DRV (WSON))
55.4 K/W · Junction-to-case(top) thermal resistance · p. 4
Junction to board (DRV (WSON))
140.2 K/W · Junction-to-board thermal resistance · p. 4

What it is and has

6
Input voltage range
3 V to 18 V · p. 1
Open LED protection
38 V · p. 1
Reference voltage
200 mV, 2% accuracy · p. 1
Soft start
Built-in · p. 1
Efficiency
Up to 90% · p. 1
Thermal shutdown
Automatic shutdown at typical junction temperature of 160°C · p. 9

Around it

6
cap 1 μF minimum
between VIN and GND; Recommended input capacitor. · p. 4
cap 1 μF to 10 μF
between VOUT and GND; Recommended output capacitor. · p. 4
ind 10 μH to 22 μH
between VIN and SW; Recommended inductor range; verify other values in the application. · p. 4
cap 220 nF
between COMP and GND; Ceramic compensation capacitor suitable for most applications. · p. 11
res External sense resistor
between FB and GND; Sets LED current. · p. 3
diode ONsemi MBR0540 or ZETEX ZHCS400
between SW and VOUT; Schottky rectifier; reverse breakdown voltage must exceed the open LED protection voltage, and current ratings must exceed average output and peak inductor current. · p. 11

Specifications

64
ParameterConditionsAs printedPage
Supply voltages on VIN VINOver operating free-air temperature range; relative to groundmin -0.3 · max 20 V4
Voltages on CTRL VINOver operating free-air temperature range; relative to groundmin -0.3 · max 20 V4
Voltage on FB and COMP VINOver operating free-air temperature range; relative to groundmin -0.3 · max 3 V4
Voltage on SW VINOver operating free-air temperature range; relative to groundmin -0.3 · max 40 V4
Operating junction temperature TJmin -40 · max 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Input voltage range, VIN VImin 3 · max 18 V4
Output voltage range VOMinimum is VINmax 38 V4
Inductor Lmin 10 · max 22 uH4
PWM dimming frequency fdimmin 5 · max 100 kHz4
Input capacitor CINmin 1 uF4
Output capacitor COmin 1 · max 10 uF4
Operating ambient temperature TAmin -40 · max 85 °C4
Operating junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJATPS61165, DRV (WSON), 6 pinstyp 80.7 °C/W4
Junction-to-case(top) thermal resistance RθJC(top)TPS61165, DRV (WSON), 6 pinstyp 55.4 °C/W4
Junction-to-board thermal resistance RθJBTPS61165, DRV (WSON), 6 pinstyp 140.2 °C/W4
Junction-to-top characterization parameter ψJTTPS61165, DRV (WSON), 6 pinstyp 0.3 °C/W4
Junction-to-board characterization parameter ψJBTPS61165, DRV (WSON), 6 pinstyp 36.5 °C/W4
Junction-to-case(bottom) thermal resistance RθJC(bottom)TPS61165, DRV (WSON), 6 pinstyp 0.9 °C/W4
Operating quiescent current into VIN IQDevice PWM switching no loadmax 2.3 mA5
Shutdown current ISDCRTL=GND, VIN = 4.2 Vmax 1 uA5
Undervoltage lockout threshold UVLOVIN fallingtyp 2.2 · max 2.5 V5
Undervoltage lockout hysterisis Vhystyp 70 mV5
CTRL logic high voltage V(CTRLh)VIN = 3 V to 18 Vmin 1.2 V5
CTRL logic low voltage V(CTRLl)VIN = 3 V to 18 Vmax 0.4 V5
CTRL pull down resistor R(CTRL)min 400 · typ 800 · max 1600 kΩ5
CTRL pulse width to shutdown toffCTRL high to lowmin 2.5 ms5
Easy Scale detection time tes_detCTRL pin lowmin 260 us5
Easy Scale detection delay tes_delaymin 100 us5
Easy Scale detection window time tes_winMeasured from CTRL highmin 1 ms5
Voltage feedback regulation voltage VREFmin 196 · typ 200 · max 204 mV5
Voltage feedback regulation voltage under brightness control V(REF_PWM)VFB = 50 mVmin 47 · typ 50 · max 53 mV5
Voltage feedback regulation voltage under brightness control V(REF_PWM)VFB = 20 mVmin 17 · typ 20 · max 23 mV5
Voltage feedback input bias current IFBVFB = 200 mVmax 2 uA5
Oscillator frequency fSmin 1 · typ 1.2 · max 1.5 MHz5
Maximum duty cycle DmaxVFB = 100 mVmin 90 · typ 93 %5
Minimum on pulse width tmin_ontyp 40 ns5
Comp pin sink current Isinktyp 100 uA5
Comp pin source current Isourcetyp 100 uA5
Error amplifier transconductance Geamin 240 · typ 320 · max 400 umho5
Error amplifier output resistance Reatyp 6 MΩ5
Error amplifier crossover frequency fea5 pF connected to COMPtyp 500 kHz5
N-channel MOSFET on-resistance RDS(ON)VIN = 3.6 Vtyp 0.3 · max 0.6 Ω5
N-channel MOSFET on-resistance RDS(ON)VIN = 3.0 Vmax 0.7 Ω5
N-channel leakage current ILN_NFETVSW = 35 V, TA = 25°Cmax 1 uA5
N-Channel MOSFET current limit ILIMD = Dmaxmin 0.96 · typ 1.2 · max 1.44 A5
Start up current limit ILIM_StartD = Dmaxtyp 0.7 A5
Time step for half current limit tHalf_LIMtyp 5 ms5
Open LED protection threshold VovpMeasured on the SW pinmin 37 · typ 38 · max 39 V5
Open LED protection threshold on FB V(FB_OVP)Measured on the FB pin, percentage of Vref, Vref = 200 mV and 20 mVtyp 50 %5
VREF filter time constant tREFtyp 180 us5
VREF ramp up time tstepEach step, Measured as number of cycles of the 1.2-MHz clocktyp 213 us5
Thermal shutdown threshold Tshutdowntyp 160 °C5
Thermal shutdown threshold hysteresis Thysteresistyp 15 °C5
Start time of program stream tstartEasyScalemin 2 us6
End time of program stream tEOSEasyScalemin 2 · max 360 us6
High time low bit tH_LBEasyScale; Logic 0min 2 · max 180 us6
Low time low bit tL_LBEasyScale; Logic 0; minimum is 2 × tH_LBmax 360 us6
High time high bit tH_HBEasyScale; Logic 1; minimum is 2 × tL_HBmax 360 us6
Low time high bit tL_HBEasyScale; Logic 1min 2 · max 180 us6
Acknowledge output voltage low VACKNLOpen drain, Rpullup =15 kΩ to VINmax 0.4 V6
Acknowledge valid time tvalACKNSee (1); acknowledge active 0, only when RFA bit is setmax 2 us6
Duration of acknowledge condition tACKNSee (1); acknowledge active 0, only when RFA bit is setmax 512 us6

Pins, by the datasheet

7
1 FB
Feedback pin for current; connect the sense resistor from FB to GND. · p. 3
2 COMP
Transconductance error amplifier output; connect an external capacitor to compensate the converter. · p. 3
3 GND
Ground. · p. 3
4 SW
Switching node; connect the switched side of the inductor here; also senses output voltage for open LED protection. · p. 3
5 CTRL
Control pin for enable, PWM and digital dimming; provides an open-drain acknowledge output when requested. · p. 3
6 VIN
Input supply; connect to a supply voltage between 3 V and 18 V. · p. 3
— Thermal Pad
Solder to the analog ground plane; use thermal vias to the ground plane if possible for heat dissipation. · p. 3

Ordering codes, by the datasheet

2
TPS61165DRVR
DRV (WSON), 6 pins · Tape and reel, 3000 parts per reel · p. 3
TPS61165DRVT
DRV (WSON), 6 pins · Tape and reel, 250 parts per reel · p. 3

Open-source boards using it

3
  • 4 layers155 × 69.8 mmDisplayunit, the printed circuit board in 3D

    Displayunit

    muccc/WomoLIN

    Open Source Steuerung von LIN Bus Geräten im Caravan Bereich.

    143 parts84GPL-3.0
  • 6 layers150 × 90 mmFront panel controller, the printed circuit board in 3D

    Front panel controller

    birdybro/FPGA_Amp

    FPGA based audiophile phono preamp and amp integrated unit idea. WIP

    115 partsGPL-3.0

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the TPS61165DRVR?

Yes. The symbol is Driver_LED:TPS61165DRV and the footprint Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS61165DRVR?

WSON-6-EP(2x2), with 7 pins. Its footprint is drawn on this page.

Where is the TPS61165DRVR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS61165DRVR?

JLCPCB lists it as part C122568, with 9,717 in stock; the sellers' links on this page open their listings.

What can replace the TPS61165DRVR?

Parts like it in the library: the TPS61165DRVT by Texas Instruments, the TPS61041DRV by Texas Instruments and the TPS61165DRVRG4 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS61165DRVR?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.