6 layers567.7 × 328.4 mm
2 layers65 × 56 mm
Repository used for storing projects from Vivado for the Advanced Programmable Electronics course on the 3rd semester of the Master in Electronics at the University of Southern Denmark.
- Size
- 65 × 56 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 42
- Nets
- 56
- Pads
- 209
- Tracks, vias
- 1,911, 43
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Feb 2022
- Updated
- 30 May 2022
Overview
Cmoda7 hat is an open-source printed circuit board by SR-Madsen, from the SR-Madsen/AdvancedProgrammableElectronics repository on GitHub. It is a 2-layer board of 65 × 56 mm with 42 parts on 56 nets, routed with 1,911 tracks and 43 vias.
It is built around the CMOD A7-35T, LM1117-3.3 and B260A-13-F-HXY, with the RJ45 among its other parts. Its parts include 13 resistors, 8 diodes, 4 capacitors, 4 connectors and 2 ICs.
Main components
4
CMOD A7-35T
Breadboardable Artix-7 FPGA ModuleDigilentUncategorised
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
B260A-13-F-HXY
SMASMA Schottky Diodes ROHSHXY MOSFETSchottky Diodes
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.mdAdvanced Programmable Electronics
Repository used for storing projects from Vivado for the Advanced Programmable Electronics course on the 3rd semester of the Master in Electronics at the University of Southern Denmark.
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 120R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R7, R8, R9, R10, R11, R12, R13 |
| 7 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4, D5, D6, D7, D8 |
| 4 | 1950R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4 |
| 2 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | TP1, TP2 |
| 2 | TestPoint_Flag | Digikey:PROBE_PAD_1206 | GND1, GND2 |
| 1 | 100R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | C2 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 24MHz | Oscillator:Oscillator_SMD_IQD_IQXO70-4Pin_7.5x5.0mm | X1 |
| 1 | B260A-13-F | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | CMOD_A7 | ass_misc:CMOD_A7 | U1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Horizontal | J4 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | HDMI_A | Digikey:HDMI_A_Female_2000-1-2-41-00-BK | J2 |
| 1 | Jumper_NO_Small | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J3 |
| 1 | TestPoint | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | GND3 |
Questions
How big is the Cmoda7 hat PCB?
It measures 65 × 56 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Cmoda7 hat use?
42 parts, built around the CMOD A7-35T, LM1117-3.3, B260A-13-F-HXY and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cmoda7 hat KiCad files?
From the SR-Madsen/AdvancedProgrammableElectronics repository on GitHub, at the commit this page was made from: the board is Hardware/2022_02_06_cmoda7_hat_V1.0/cmoda7_hat/cmoda7_hat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cmoda7 hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask SR-Madsen before reusing the design.
Similar boards
- 4 layers41 × 41 mm
Flight Controller
benwys/SparrowHawk
Open source flight controller for FPV drones. Includes two complete hardware designs (kicad) with production files. Will include custom firmware (bare-metal cpp). In progress :-)
103 partsMIT - 4 layers155 × 69.8 mm
Displayunit
muccc/WomoLIN
Open Source Steuerung von LIN Bus Geräten im Caravan Bereich.
143 parts84GPL-3.0 - 2 layers181.4 × 70.6 mm
- 4 layers111.8 × 80.8 mm
- 2 layers284 × 128.5 mm
Xva1-ui
MacMannes/XVA1-User-Interface
A hardware user interface for the XVA1 virtual analog synthesizer, inspired by the Hydrasynth's layout. The XVA1 (and its FM sibling the XFM2) is built on an Artix-7 FPGA but has no built-in UI — this project adds one.
65 parts10GPL-3.0 - 4 layers79 × 142 mm
Guitarray control board
IIP-Group/polymap
Repository for the PolyMap Hardware and PolyMap Studio VST Plugin (prototype version).
757 parts4CERN-OHL-P-2.0 - 2 layers173.2 × 167.4 mm
