
ESP8266
windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器

USB-TTL转换电路,用于学习kicad,包括交互式BOM表。
USB TTL is an open-source printed circuit board by mtf-sisi, from the mtf-sisi/USB-TTL repository on GitHub. It is a 2-layer board of 25.1 × 16.1 mm with 9 parts on 10 nets, routed with 39 tracks and 6 vias.
It is built around the CH330N. Its parts include 2 capacitors, 2 resistors, 2 diodes, 2 connectors and 1 IC.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 104 | Capacitor_SMD:C_0201_0603Metric | C2, C3 |
| 2 | 4.7K | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 2 | LED | LED_SMD:LED_0201_0603Metric | D1, D2 |
| 1 | CH330N | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J2 |
| 1 | USB_A | Connector_USB:USB_A_CNCTech_1001-011-01101_Horizontal | J1 |

windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器



szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,

Icey7122/AM32_AI8051U
Using PWMA to output 3 sets of complementary PWM for driving MOSFEET, Using PWMB for capturing external throttle signals, Using ADC to sample voltage and current, for low voltage protection and over current…



It measures 25.1 × 16.1 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the CH330N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mtf-sisi/USB-TTL repository on GitHub, at the commit this page was made from: the board is USB_TTL.kicad_pcb and its schematic USB_TTL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mtf-sisi before reusing the design.