
ESP8266
windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器

Ebaz4205 ioboard is an open-source printed circuit board by Sasasu, from the Sasasu/ebaz4205_ioboard repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 45 × 100 mm with 18 parts on 66 nets, routed with 364 tracks and 4 vias.
It is built around the CH330N. Its parts include 10 connectors, 4 capacitors, 2 resistors and 2 ICs.
IO Board for EBAZ4205


| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | R | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | AP1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | BOOT | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J7 |
| 1 | BOOT_JUMP | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | CH330N | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Conn_02x02_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J9 |
| 1 | DATA1 | Connector_PinHeader_2.00mm:PinHeader_2x10_P2.00mm_Vertical | J5 |
| 1 | DATA2 | Connector_PinHeader_2.00mm:PinHeader_2x10_P2.00mm_Vertical | J3 |
| 1 | DATA3 | Connector_PinHeader_2.00mm:PinHeader_2x10_P2.00mm_Vertical | J2 |
| 1 | HDMI_A | Connector_HDMI:HDMI_A_Amphenol_10029449-111 | J1 |
| 1 | IO | Connector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_Vertical | J4 |
| 1 | TTY | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J10 |

windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器



szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,

Icey7122/AM32_AI8051U
Using PWMA to output 3 sets of complementary PWM for driving MOSFEET, Using PWMB for capturing external throttle signals, Using ADC to sample voltage and current, for low voltage protection and over current…



TG9541/stm8s001ch330
USB Dongle STM8S001J3M3 with CH330N, e.g. for STM8 eForth
It measures 45 × 100 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the CH330N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Sasasu/ebaz4205_ioboard repository on GitHub, at the commit this page was made from: the board is ebaz4205_ioboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).