
Neo tracker hat
Misc. PCB designs
- Size
- 40 × 40 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 18
- Nets
- 68
- Pads
- 125
- Tracks, vias
- 114, 26
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Apr 2023
- Updated
- 11 Sep 2026
Overview
Neo tracker hat is an open-source printed circuit board by MTalon63, from the MTalon63/PCBs repository on GitHub. It is a 4-layer board of 40 × 40 mm with 18 parts on 68 nets, routed with 114 tracks and 26 vias.
It is built around the NC7WZ07P6X, WIO-E5 and MAX-M10S, with the SSM6L56FE,LM among its other parts. Its parts include 6 connectors, 4 ICs, 2 resistors, 1 capacitor and 1 inductor.
Main components
4NC7WZ07P6X
SOT-363-40℃~+125℃ 1.65V~5.5V 10uA 2 2.2ns@3.3V,50pF 24mA 24mA Schmitt trigger SOT-363 Buffers, Drivers, Receivers, Transceivers ROHSTECH PUBLICBuffers, Drivers, Receivers, TransceiversWIO-E5
SMD,12x12mmSMD,12x12mm LoRa Modules ROHSSeeedLoRa ModulesMAX-M10S
LCC-18_10.1X9.7LCC-18_10.1X9.7 New Arrivals ROHSu-bloxUncategorisedSSM6L56FE,LM
SOT-563(SOT-666)MOSFETsToshiba
README
README.mdPCBs
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | Mounting_Holes:MountingHole_3mm | H1, H2, H3, H4 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 47n | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | AUDIO | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x12_P2.54mm_Vertical | J1 |
| 1 | MAX-M10S | RF_GPS:ublox_MAX | U1 |
| 1 | NC7WZ07P6X | SamacSys_Parts:SOT65P210X110-6N | U3 |
| 1 | SMA_LORAWAN | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J4 |
| 1 | SSM6L56FE,LM | SamacSys_Parts:SOTFL50P160X60-6N | U2 |
| 1 | UFL_GPS | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J5 |
| 1 | USB | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J3 |
| 1 | V_BCKP | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J6 |
| 1 | Wio-E5 | SamacSys_Parts:317990687 | U4 |
More from MTalon63/PCBs
12- 2 layers86.4 × 92 mm

- 2 layers90.8 × 98 mm

- 2 layers86.4 × 58 mm

- 4 layers100 × 100 mm

- 2 layers50 × 50 mm

- 2 layers66.5 × 42 mm

- 6 layers50 × 50 mm

- 2 layers30 × 51 mm

- 2 layers

- 2 layers40.8 × 25 mm

- 2 layers

- 2 layers

Similar boards
- 4 layers100 × 80 mm

- 4 layers40 × 100 mm

NNCpro
PlanAndBuild/NoNameComputer-2.0
The NoNameComputer 2.0 AKA NNCpro is being designed for mid-high power rockets and other flying vehicle. It will be equipped with various sensors like barometers, IMUs, magnetometer, current sensing etc.
263 parts2 - 2 layers50 × 45 mm

PowerCutoffBoard1
ararobo/GN10RemoteEmergencyStop
PowerCutoffBoard and RemoteSwitchBoard created by Gento Aiba.
46 parts1 - 2 layers68.5 × 53.5 mm

Steering wheel TX
repmanga/steering_wheel
This is PCB file of multisteering wheel for ECUmaster EMU black ECU
128 parts1MIT - 4 layers56.2 × 70.5 mm

- 4 layers35.1 × 33.5 mm

- 4 layers83.7 × 61.7 mm

- 4 layers50 × 30 mm

Cc1200-balloon
tmpk13/cc1200-balloon
High altitude balloon payload: a CC1200 sub-GHz telemetry downlink and an air quality sensor stack, hosted by a Seeed Wio-E5 module. Four-layer 50 x 30 mm board, routed.
108 partsMIT
Questions
How big is the Neo tracker hat PCB?
It measures 40 × 40 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Neo tracker hat use?
18 parts, built around the NC7WZ07P6X, WIO-E5, MAX-M10S and SSM6L56FE,LM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Neo tracker hat KiCad files?
From the MTalon63/PCBs repository on GitHub, at the commit this page was made from: the board is neo-tracker-hat/neo-tracker-hat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Neo tracker hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask MTalon63 before reusing the design.