

LoRa COW
MUUU!: Livestock Smart Collar 🐮
- Size
- 100 × 80 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 117
- Nets
- 88
- Pads
- 334
- Tracks, vias
- 511, 173
- Pours
- 24
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Jan 2026
- Updated
- 12 Feb 2026
Overview
LoRa COW is an open-source printed circuit board by JuanVicaria, from the JuanVicaria/MUUU repository on GitHub. It is a 4-layer board of 100 × 80 mm with 117 parts on 88 nets, routed with 511 tracks and 173 vias.
It is built around the L86-M33, WIO-E5 and IRLML6402, with the 2SC3325-Y,LF, TBC847BW and WS2812B among its other parts. Its parts include 7 capacitors, 6 transistors, 5 ICs, 5 diodes and 2 resistors. It belongs with the radio and wireless boards of this library.
Main components
6L86-M33
SMD-12P-167dBm -40℃~+85℃ 3V~4.3V Hot start acceleration、Short-circuit detection SMD-12P GNSS Modules ROHSQuectelGNSS ModulesWIO-E5
SMD,12x12mmSMD,12x12mm LoRa Modules ROHSSeeedLoRa ModulesIRLML6402
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 110pF 12nC 145pF 20V 3.7A 400mV 633pF 65mΩ@4.5V P-Channel SOT-23 MOSFETs ROHSGuangdong HottechMOSFETs2SC3325-Y,LF
SOT-23-55℃~+150℃ 1 NPN 100nA 200mW 25 250mV 300MHz 500mA 50V 5V NPN SOT-23 Bipolar (BJT) ROHSToshibaBipolar (BJT)TBC847BW
SOT-323-3SOT-323-3 SMT ROHSGalaxy MicroelectronicsUncategorisedWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdMUUU
MUUU!: Livestock Smart Collar 🐮 The livestock collar is designed to monitor the health and location of your animals in real time. It integrates multiple sensors to provide essential data:
🐄 Livestock Monitoring Collar
The livestock collar is designed to monitor the health and location of animals in real time. It integrates multiple sensors to provide essential data for reliable and long-term monitoring.
🛰️ Location Tracking
- GNSS module
Tracks the animal’s position, helping you locate them reliably even in open fields or challenging environments.
🌡️ Health & Environmental Monitoring
-
Body temperature sensor
Provides high-accuracy body temperature measurements, enabling early detection of illness or heat stress. -
Humidity sensor
Measures relative humidity, helping assess sweating and thermal comfort. -
Heart rate and SpO₂ sensor
Measures heart rate and blood oxygen saturation (SpO₂), providing key vital signs.
📡 Data Processing & Communication
All collected data is processed by the Wio-E5 MCU by Seeed Studio, a low-power microcontroller that integrates a LoRa transceiver.
This enables long-range, low-energy data transmission to gateways over several kilometers while preserving battery life, making it ideal for remote livestock monitoring.
🔋 Power System
The collar is powered by:
- A 1 W solar panel (ref: https://es.aliexpress.com/item/1005008683803941.html 109x83)
- A LiPo 18650 battery
This power configuration ensures continuous operation even in low-sunlight conditions while maintaining low energy consumption for extended autonomy ⏳.
A special thanks to PCBWay for sponsoring this project by manufacturing the PCBs and assembling the components, enabling us to bring this modular livestock collar to life, get your board assembled at: https://www.pcbway.com/
Parts
117| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP_A4, TP_A5, TP_BATT1, TP_BZ1, TP_GPS1, TP_GPS2, TP_RST1, TP_RX1, TP_RX2, TP_SL1, TP_SWCLK1, TP_SWDIO1, TP_TX1, TP_TX2 |
| 8 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JLED1, JLED2, JLED3, JLED4, JP_ADC1, JP_GPS_RST1, JP_GPS1, JP_GPS2 |
| 7 | 100nF | Capacitor_SMD:C_0805_2012Metric | C_LED1, C3, CBAT1, CGPS3, CHV2, CI2C1, CW2 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | RINT1, RINT2, RINT3, RSCL1, RSDA1 |
| 5 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C2, CBAT3, CGPS1, CHV1, CW1 |
| 4 | 120 | Resistor_SMD:R_0805_2012Metric | RF3, RLED1, RLED2, RLED3 |
| 3 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J_BATT1, JOV_H1, JOV_H2 |
| 3 | LED | LORA-COW:LED_ONE_COLOR | D1, D2, D3 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | CBAT2, CGPS2 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C_USB1, C_USB2 |
| 2 | 220K | Resistor_SMD:R_0805_2012Metric | RG_BAT3, RG3 |
| 2 | 2K2 | Resistor_SMD:R_0805_2012Metric | RG_BAT2, RG2 |
| 2 | 2N7002 | LORA-COW:SOT-23 | Q2, Q5 |
| 2 | 330k | Resistor_SMD:R_0805_2012Metric | R03, R033 |
| 2 | 4.75Meg | Resistor_SMD:R_0805_2012Metric | ROUT1, ROV_CAP1 |
| 2 | 420k | Resistor_SMD:R_0805_2012Metric | RO2, RO22 |
| 2 | 47K | Resistor_SMD:R_0805_2012Metric | RG_BAT1, RG1 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R_CC1, R_CC2 |
| 2 | 8.25Meg | Resistor_SMD:R_0805_2012Metric | ROUT2, ROV_CAP2 |
| 2 | IRLML6402 | LORA-COW:SOT-23 | Q1, Q4 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SolderJumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP_OP1, JP_OP2 |
| 2 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP_BATT1, JP_BATT2 |
| 2 | ~ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | CEA3, CEA4 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | REA2 |
| 1 | 1.1Meg | Resistor_SMD:R_0805_2012Metric | ROK3 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 10uH | LORA-COW:INDUCTOR_10UH | L2 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 22uH | LORA-COW:INDUCTOR_2 | L1 |
| 1 | 2SC3325 | LORA-COW:SOT-23 | Q6 |
| 1 | 4.53Meg | Resistor_SMD:R_0805_2012Metric | ROK1 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric | RF1 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric | RF2 |
| 1 | 500K | Resistor_SMD:R_0805_2012Metric | RO1 |
| 1 | 500k | Resistor_SMD:R_0805_2012Metric | RO11 |
| 1 | 6.19Meg | Resistor_SMD:R_0805_2012Metric | ROV_LIPO1 |
| 1 | 6.81Meg | Resistor_SMD:R_0805_2012Metric | ROV_LIPO2 |
| 1 | 7.5Meg | Resistor_SMD:R_0805_2012Metric | ROK2 |
| 1 | Antenna_Shield | LORA-COW:THT_ANTENNA | EA1 |
| 1 | Buzzer | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | BZ1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J_UART1 |
| 1 | Conn_01x07 | Connector_JST:JST_XH_S7B-XH-A_1x07_P2.50mm_Horizontal | J1 |
| 1 | Conn_02x10_Odd_Even | LORA-COW:JTAG_20PINS | Conn_JTAG1 |
| 1 | D | LORA-COW:1N4448 | D5 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JPGPS1 |
| 1 | L86-M33 | LORA-COW:L86-M33 | U2 |
| 1 | LDO | LORA-COW:LDO | U3 |
| 1 | Lipo_18650 | LORA-COW:BAT_18650 | BT1 |
| 1 | SUPERCAP | LORA-COW:SCREW_CONN | BT2 |
| 1 | SW_Push | LORA-COW:BUTTON | SW_RST1 |
| 1 | Solar_Screw_Conn | LORA-COW:SCREW_CONN_VERTICAL | JSOLAR1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP_JTAG1 |
| 1 | TBC847 | LORA-COW:SOT-23 | Q3 |
| 1 | USB_C_Plug_USB2.0 | LORA-COW:USB-C | P1 |
| 1 | WIO-E5 | LORA-COW:WIO-E5 | U1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D4 |
| 1 | ~ | LORA-COW:OPA369 | U5 |
| 1 | ~ | LORA-COW:SWITCH | SW1 |
| 1 | ~ | LORA-COW:BQ25570 | U4 |
More from JuanVicaria/MUUU
1- 2 layers30 × 80 mm

Similar boards
- 2 layers152 × 51 mm

- 2 layers50 × 45 mm

PowerCutoffBoard1
ararobo/GN10RemoteEmergencyStop
PowerCutoffBoard and RemoteSwitchBoard created by Gento Aiba.
46 parts1 - 4 layers35.1 × 33.5 mm

- 4 layers50 × 30 mm

Cc1200-balloon
tmpk13/cc1200-balloon
High altitude balloon payload: a CC1200 sub-GHz telemetry downlink and an air quality sensor stack, hosted by a Seeed Wio-E5 module. Four-layer 50 x 30 mm board, routed.
108 partsMIT - 4 layers40 × 40 mm

- 2 layers36.8 × 90.9 mm

Bwlr3d
teapotlaboratories/bwlr3d
Teapot BWLR3D: Asset Tracker and Environmental Sensor with Solar Energy Harvesting
108 parts18MIT - 4 layers102.4 × 27.5 mm

- 4 layers105 × 137 mm

Questions
How big is the LoRa COW PCB?
It measures 100 × 80 mm and has 4 copper layers, 1.6 mm thick.
What parts does the LoRa COW use?
117 parts, built around the L86-M33, WIO-E5, IRLML6402 and 2SC3325-Y,LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LoRa COW KiCad files?
From the JuanVicaria/MUUU repository on GitHub, at the commit this page was made from: the board is Hardware/TX Board/LoRa-COW/LoRa-COW.kicad_pcb and its schematic Hardware/TX Board/LoRa-COW/LoRa-COW.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LoRa COW design in my own project?
Its repository states no licence, so its author keeps all rights: ask JuanVicaria before reusing the design.