2 layers64 × 47 mm
RemoteSwitchBoard
ararobo/GN10RemoteEmergencyStop
PowerCutoffBoard and RemoteSwitchBoard created by Gento Aiba.
39 parts1
2 layers50 × 45 mm
PowerCutoffBoard1
ararobo/GN10RemoteEmergencyStop1PowerCutoffBoard and RemoteSwitchBoard created by Gento Aiba.
- Size
- 50 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 64
- Pads
- 180
- Tracks, vias
- 268, 109
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Sep 2024
- Updated
- 6 Oct 2025
Overview
PowerCutoffBoard1 is an open-source printed circuit board by ararobo, from the ararobo/GN10RemoteEmergencyStop repository on GitHub. It is a 2-layer board of 50 × 45 mm with 46 parts on 64 nets, routed with 268 tracks and 109 vias.
It is built around the WIO-E5 and MIC4427ZM. Its parts include 12 capacitors, 9 resistors, 8 diodes, 5 ICs and 5 connectors. It belongs with the STM32 boards of this library.
Main components
2README
README.mdGN10RemoteEmergencyStop
PowerCutoffBoard and RemoteSwitchBoard created by Gento Aiba.
This repository contains hardware and firmware for an emergency stop system:
- PowerCutoffBoard: A circuit board that cuts off power in emergency situations.
- RemoteSwitchBoard: A circuit board that remotely controls switches.
PowerCutoffBoard
RemoteSwitchBoard
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4, C6, C9, C11, C13 |
| 7 | 1k | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R2, R4, R5, R6, R7, R8, R9 |
| 7 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D4, D5, D6, D7, D8, D9 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5, C10 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8 |
| 2 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J5, J6 |
| 2 | SW_Push | GN10_Parts:TVAF | SW1, SW2 |
| 1 | 10k | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R1 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 3.3V | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_01x03 | Connector_AMASS:AMASS_MR30PW-FB_1x03_P3.50mm_Horizontal | J2 |
| 1 | Conn_01x04 | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J3 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Molex_73251-2120_EdgeMount_Horizontal | J1 |
| 1 | D | Diode_SMD:Nexperia_CFP3_SOD-123W | D1 |
| 1 | MCP2562-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | MIC4427 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | STM32F303K8Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | SW_DIP_x04 | Button_Switch_SMD:SW_DIP_SPSTx04_Slide_Copal_CHS-04B_W7.62mm_P1.27mm | SW3 |
| 1 | Wio-E5 | GN10_Parts:LoRa-E5 | U2 |
More from ararobo/GN10RemoteEmergencyStop
3- 2 layers80 × 25 mm
ConsoleBoard
ararobo/GN10RemoteEmergencyStop
PowerCutoffBoard and RemoteSwitchBoard created by Gento Aiba.
26 parts1 - 2 layers85 × 65 mm
PowerCutoffBoard2
ararobo/GN10RemoteEmergencyStop
PowerCutoffBoard and RemoteSwitchBoard created by Gento Aiba.
23 parts1
Similar boards
- 4 layers100 × 80 mm
- 4 layers35.1 × 33.5 mm
- 4 layers50 × 30 mm
Cc1200-balloon
tmpk13/cc1200-balloon
High altitude balloon payload: a CC1200 sub-GHz telemetry downlink and an air quality sensor stack, hosted by a Seeed Wio-E5 module. Four-layer 50 x 30 mm board, routed.
108 partsMIT - 4 layers40 × 40 mm
- 4 layers174 × 104 mm
- 2 layers267 × 300 mm
Output.Panel R0.5.1 300x300 2layer step1 Modified
rusefi/hw_microRusEfi
microRusEfi board for rusEfi ECU
2,371 parts98 - 4 layers135 × 82.5 mm
- 2 layers99.1 × 99.1 mm
Questions
How big is the PowerCutoffBoard1 PCB?
It measures 50 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PowerCutoffBoard1 use?
46 parts, built around the WIO-E5 and MIC4427ZM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PowerCutoffBoard1 KiCad files?
From the ararobo/GN10RemoteEmergencyStop repository on GitHub, at the commit this page was made from: the board is hardware/PowerCutoffBoard1/PowerCutoffBoard1.kicad_pcb and its schematic hardware/ConsoleBoard/ConsoleBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PowerCutoffBoard1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ararobo before reusing the design.