
Bwlr3d
teapotlaboratories/bwlr3d
Teapot BWLR3D: Asset Tracker and Environmental Sensor with Solar Energy Harvesting
QuectelExtended
-167dBm -40℃~+85℃ 3V~4.3V Hot start acceleration、Short-circuit detection SMD-12P GNSS Modules ROHS
The L86-M33 is a GNSS Module made by Quectel in a SMD-12P package with 12 pins. -167dBm -40℃~+85℃ 3V~4.3V Hot start acceleration、Short-circuit detection SMD-12P GNSS Modules ROHS.
PCBKit's library has its footprint (EasyEDA_Cloud:GPSM-SMD_12P-L16.0-W16.0-P2.54-BL, from EasyEDA), ready for a KiCad board. 1,724 are in stock at JLCPCB (part C909689). 24 open-source boards in 16 repositories on GitHub use it.
The library has no symbol for this part yet.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| GPS L1 Band Receiver | typ 1575.42 MHz | 2 | |
| GLONASS L1 Band Receiver | typ 1601.71 MHz | 2 | |
| Channel | Tracking | typ 33 channels | 2 |
| Channel | Acquisition | typ 99 channels | 2 |
| Horizontal Position Accuracy | Autonomous; <2.5m CEP | max 2.5 m CEP | 2 |
| Velocity Accuracy | Without Aid; <0.1m/s | max 0.1 m/s | 2 |
| Acceleration Accuracy | Without Aid; <0.1m/s² | max 0.1 m/s² | 2 |
| Timing Accuracy | 1PPS Out | typ 10 ns | 2 |
| Reacquisition Time | <1s | max 1 s | 2 |
| Cold Start | TTFF @-130dBm with EASY™; <15s | max 15 s | 2 |
| Warm Start | TTFF @-130dBm with EASY™; <5s | max 5 s | 2 |
| Hot Start | TTFF @-130dBm with EASY™; <1s | max 1 s | 2 |
| Cold Start | TTFF @-130dBm without EASY™; <35s | max 35 s | 2 |
| Warm Start | TTFF @-130dBm without EASY™; <30s | max 30 s | 2 |
| Hot Start | TTFF @-130dBm without EASY™; <1s | max 1 s | 2 |
| Sensitivity | Acquisition | typ -149 dBm | 2 |
| Sensitivity | Tracking | typ -167 dBm | 2 |
| Sensitivity | Reacquisition | typ -161 dBm | 2 |
| Maximum Altitude | max 18000 m | 2 | |
| Maximum Velocity | max 515 m/s | 2 | |
| Maximum Acceleration | max 4 G | 2 | |
| UART | Adjustable | min 4800 · max 115200 bps | 2 |
| UART | Default | typ 9600 bps | 2 |
| Update Rate | 1Hz default | typ 1 · max 10 Hz | 2 |
| I/O Voltage | min 2.7 · max 2.9 V | 2 | |
| Temperature Range | min -40 · max 85 °C | 2 | |
| Power Supply | min 3 · max 4.3 V | 2 | |
| Power Acquisition | 3.3V (GPS+GLONASS) | typ 30 mA | 2 |
| Power Tracking | 3.3V (GPS+GLONASS) | typ 26 mA | 2 |
| AlwaysLocate™ | GPS+GLONASS System under Outdoor Static Mode | typ 3.5 mA | 2 |
| Backup Mode | typ 7 uA | 2 | |
| Standby Mode | typ 1 mA | 2 |

teapotlaboratories/bwlr3d
Teapot BWLR3D: Asset Tracker and Environmental Sensor with Solar Energy Harvesting


mcapdeville/esp32s3aprs
ESP32s3 APRS beacon/tracker/logger, USB kiss TNC , USB audio FM tranceiver with Micropython shell


SolderedElectronics/GNSS-GPS-L86-M33-breakout-qwiic-hardware-design
Hardware design, BOM, gerbers and 3D files for GNSS-GPS-L86-M33-breakout-qwiic designed by Soldered Electronics.

koksoybedirhan/RocketAvionic-FreeRTOS
This repository contains the hardware and software of the project named "Orta İrtifa Roketler İçin FreeRTOS Tabanlı STM32 İşlemcili Aviyonik Kart Yazılım Tasarımı", which is entitled to be supported by TÜBİTAK 2209-A.

Yes. the footprint EasyEDA_Cloud:GPSM-SMD_12P-L16.0-W16.0-P2.54-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.
SMD-12P, with 12 pins. Its footprint is drawn on this page.
Quectel publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C909689, with 1,724 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the L80RE-M37 by Quectel. Check their datasheets: a part that fits the footprint may still differ in its ratings.
24 boards in 16 repositories on GitHub; the most starred are listed on this page, with their KiCad files.