
Steering wheel
repmanga/steering_wheel
This is PCB file of multisteering wheel for ECUmaster EMU black ECU

This is PCB file of multisteering wheel for ECUmaster EMU black ECU
Steering wheel TX is an open-source printed circuit board by repmanga, from the repmanga/steering_wheel repository on GitHub, published under the MIT licence. It is a 2-layer board of 68.5 × 53.5 mm with 128 parts on 83 nets, routed with 93 tracks and 5 vias.
It is built around the NC7WZ07P6X, TPS54428DDAR and TJA1050, with the ESDCAN24-2BLY and USBLC6-2P6 among its other parts. Its parts include 33 capacitors, 30 resistors, 10 ICs, 10 connectors and 8 diodes. It belongs with the STM32 boards of this library.
This repository contains PCB and schematic files for Formula student STM32 mmultisteering wheel project. Relevant code for this project you can find here https://github.com/repmanga/multisteering-wheel
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | , , , , , , , , , , , , , , , +8 | ||
| 14 | 100n | Capacitor_SMD:C_0603_1608Metric | C4, C5, C11, C13, C17, C23, C24, C25, C26, C27, C28, C29, C30, C31 |
| 10 | R10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R13, R14, R15, R16, R17, R18 |
| 7 | ESDCAN24-2BLY | Package_TO_SOT_SMD:SOT-23-3 | D3, D5, D6, D7, D8, D9, D10 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R25, R26, R27, R28, R29, R30 |
| 6 | 2k | Resistor_SMD:R_0603_1608Metric | R19, R20, R21, R22, R23, R24 |
| 6 | NC7WZ07P6X | Package_TO_SOT_SMD:SOT-23-6 | U5, U6, U7, U8, U9, U10 |
| 6 | WF-2R | Connector_confly:WF-2R | J5, J6, J7, J8, J9, J10 |
| 4 | MountingHole_2.2mm_M2_DIN965_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | 1, 2, 3, 4 |
| 3 | 20 | Capacitor_SMD:C_0603_1608Metric | C1, C2, C9 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C22, C33 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C8, C10 |
| 2 | 1n | Capacitor_SMD:C_0603_1608Metric | C21, C32 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C12 |
| 2 | 22u | Capacitor_SMD:CP_Elec_5x5.4 | C19, C20 |
| 2 | 30 | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | 510 | Resistor_SMD:R_0603_1608Metric | R7, R12 |
| 2 | TO-1608BC-MYF | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | 3,3V, CAN |
| 2 | WF-4R | Connector_confly:WF-4R | J3, J4 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 124k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 22.1k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C15 |
| 1 | 3.3uH | Inductor_SMD:L_APV_APH0420 | L1 |
| 1 | 300 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 8200 | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | AP2127N-3.3 | Package_TO_SOT_SMD:SOT-23-3 | U4 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LOGO | Graphics:321 | G*** |
| 1 | SJK-7I 8 MHz | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | STM32F100C6Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | RST |
| 1 | TJA1050 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TPS54428DDAR | Package_SO:Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm_ThermalVias | U3 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | D1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J1 |

repmanga/steering_wheel
This is PCB file of multisteering wheel for ECUmaster EMU black ECU

repmanga/steering_wheel
This is PCB file of multisteering wheel for ECUmaster EMU black ECU

PlanAndBuild/NoNameComputer-2.0
The NoNameComputer 2.0 AKA NNCpro is being designed for mid-high power rockets and other flying vehicle. It will be equipped with various sensors like barometers, IMUs, magnetometer, current sensing etc.



Twisted-Fields/rp2040-motor-controller
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.

sequoia-hope/rp2350-motor-controller
An RP2350 based brushless motor controller

rupantar2002/featherbyte-uno
Arduino Uno footprint, RISC-V heart. Built on the WCH CH32V203C8T6

It measures 68.5 × 53.5 mm and has 2 copper layers, 1.6 mm thick.
128 parts, built around the NC7WZ07P6X, TPS54428DDAR, TJA1050 and ESDCAN24-2BLY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the repmanga/steering_wheel repository on GitHub, at the commit this page was made from: the board is steering_wheel_TX.kicad_pcb and its schematic button.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).